Re: [PATCH v4 0/2] Avoid selftests on some Asus models
From: Dmitry Torokhov
Date: Mon Oct 03 2016 - 01:17:19 EST
On Sat, Oct 01, 2016 at 07:56:37AM -0300, Marcos Paulo de Souza wrote:
> ping?
Sorry for the delay, I was trying to wrap my mind around the new
always/never/sometimes logic.
Does the version below still work for you?
Thanks.
--
Dmitry
Input: i8042 - skip selftest on ASUS laptops
From: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
On suspend/resume cycle, selftest is executed to reset i8042 controller.
But when this is done in Asus devices, subsequent calls to detect/init
functions to elantech driver fails. Skipping selftest fixes this problem.
An easier step to reproduce this problem is adding i8042.reset=1 as a
kernel parameter. On Asus laptops, it'll make the system to start with the
touchpad already stuck, since psmouse_probe forcibly calls the selftest
function.
This patch was inspired by John Hiesey's change[1], but, since this problem
affects a lot of models of Asus, let's avoid running selftests on them.
All models affected by this problem:
A455LD
K401LB
K501LB
K501LX
R409L
V502LX
X302LA
X450LCP
X450LD
X455LAB
X455LDB
X455LF
Z450LA
[1]: https://marc.info/?l=linux-input&m=144312209020616&w=2
Fixes: "ETPS/2 Elantech Touchpad dies after resume from suspend"
(https://bugzilla.kernel.org/show_bug.cgi?id=107971)
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
Documentation/kernel-parameters.txt | 9 +++
drivers/input/serio/i8042-io.h | 2 -
drivers/input/serio/i8042-ip22io.h | 2 -
drivers/input/serio/i8042-ppcio.h | 2 -
drivers/input/serio/i8042-sparcio.h | 2 -
drivers/input/serio/i8042-unicore32io.h | 2 -
drivers/input/serio/i8042-x86ia64io.h | 96 ++++++++++++++++++++++++++++++-
drivers/input/serio/i8042.c | 55 ++++++++++++++----
8 files changed, 150 insertions(+), 20 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a4f4d69..46726d4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1457,7 +1457,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
controllers
i8042.notimeout [HW] Ignore timeout condition signalled by controller
- i8042.reset [HW] Reset the controller during init and cleanup
+ i8042.reset [HW] Reset the controller during init, cleanup and
+ suspend-to-ram transitions, only during s2r
+ transitions, or never reset
+ Format: { 1 | Y | y | 0 | N | n }
+ 1, Y, y: always reset controller
+ 0, N, n: don't ever reset controller
+ Default: only on s2r transitions on x86; most other
+ architectures force reset to be always executed
i8042.unlock [HW] Unlock (ignore) the keylock
i8042.kbdreset [HW] Reset device connected to KBD port
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index a5eed2a..34da81c 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -81,7 +81,7 @@ static inline int i8042_platform_init(void)
return -EBUSY;
#endif
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
diff --git a/drivers/input/serio/i8042-ip22io.h b/drivers/input/serio/i8042-ip22io.h
index ee1ad27..08a1c10 100644
--- a/drivers/input/serio/i8042-ip22io.h
+++ b/drivers/input/serio/i8042-ip22io.h
@@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
return -EBUSY;
#endif
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h
index f708c75..1aabea4 100644
--- a/drivers/input/serio/i8042-ppcio.h
+++ b/drivers/input/serio/i8042-ppcio.h
@@ -44,7 +44,7 @@ static inline void i8042_write_command(int val)
static inline int i8042_platform_init(void)
{
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index afcd1c1..6231d63 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -130,7 +130,7 @@ static int __init i8042_platform_init(void)
}
}
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h
index 73f5cc1..4557475 100644
--- a/drivers/input/serio/i8042-unicore32io.h
+++ b/drivers/input/serio/i8042-unicore32io.h
@@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
return -EBUSY;
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 60d74e1..07d547d 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -518,6 +518,90 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
{ }
};
+/*
+ * On some Asus laptops, just running self tests cause problems.
+ */
+static const struct dmi_system_id i8042_dmi_noselftest_table[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R409L"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"),
+ },
+ },
+ { }
+};
static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
{
/* MSI Wind U-100 */
@@ -1080,12 +1164,18 @@ static int __init i8042_platform_init(void)
return retval;
#if defined(__ia64__)
- i8042_reset = true;
+ i8042_reset = I8042_RESET_ALWAYS;
#endif
#ifdef CONFIG_X86
- if (dmi_check_system(i8042_dmi_reset_table))
- i8042_reset = true;
+ /* Honor module parameter when value is not default */
+ if (i8042_reset == I8042_RESET_DEFAULT) {
+ if (dmi_check_system(i8042_dmi_reset_table))
+ i8042_reset = I8042_RESET_ALWAYS;
+
+ if (dmi_check_system(i8042_dmi_noselftest_table))
+ i8042_reset = I8042_RESET_NEVER;
+ }
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = true;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 405252a..89abfdb 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -48,9 +48,39 @@ static bool i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
-static bool i8042_reset;
-module_param_named(reset, i8042_reset, bool, 0);
-MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
+enum i8042_controller_reset_mode {
+ I8042_RESET_NEVER,
+ I8042_RESET_ALWAYS,
+ I8042_RESET_ON_S2RAM,
+#define I8042_RESET_DEFAULT I8042_RESET_ON_S2RAM
+};
+static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
+static int i8042_set_reset(const char *val, const struct kernel_param *kp)
+{
+ enum i8042_controller_reset_mode *arg = kp->arg;
+ int error;
+ bool reset;
+
+ if (val) {
+ error = kstrtobool(val, &reset);
+ if (error)
+ return error;
+ } else {
+ reset = true;
+ }
+
+ *arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
+ return 0;
+}
+
+static const struct kernel_param_ops param_ops_reset_param = {
+ .flags = KERNEL_PARAM_OPS_FL_NOARG,
+ .set = i8042_set_reset,
+};
+#define param_check_reset_param(name, p) \
+ __param_check(name, p, enum i8042_controller_reset_mode)
+module_param_named(reset, i8042_reset, reset_param, 0);
+MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
static bool i8042_direct;
module_param_named(direct, i8042_direct, bool, 0);
@@ -1019,7 +1049,7 @@ static int i8042_controller_init(void)
* Reset the controller and reset CRT to the original value set by BIOS.
*/
-static void i8042_controller_reset(bool force_reset)
+static void i8042_controller_reset(bool s2r_wants_reset)
{
i8042_flush();
@@ -1044,8 +1074,10 @@ static void i8042_controller_reset(bool force_reset)
* Reset the controller if requested.
*/
- if (i8042_reset || force_reset)
+ if (i8042_reset == I8042_RESET_ALWAYS ||
+ (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
i8042_controller_selftest();
+ }
/*
* Restore the original control register setting.
@@ -1110,7 +1142,7 @@ static void i8042_dritek_enable(void)
* before suspending.
*/
-static int i8042_controller_resume(bool force_reset)
+static int i8042_controller_resume(bool s2r_wants_reset)
{
int error;
@@ -1118,7 +1150,8 @@ static int i8042_controller_resume(bool force_reset)
if (error)
return error;
- if (i8042_reset || force_reset) {
+ if (i8042_reset == I8042_RESET_ALWAYS ||
+ (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
error = i8042_controller_selftest();
if (error)
return error;
@@ -1195,7 +1228,7 @@ static int i8042_pm_resume_noirq(struct device *dev)
static int i8042_pm_resume(struct device *dev)
{
- bool force_reset;
+ bool want_reset;
int i;
for (i = 0; i < I8042_NUM_PORTS; i++) {
@@ -1218,9 +1251,9 @@ static int i8042_pm_resume(struct device *dev)
* off control to the platform firmware, otherwise we can simply restore
* the mode.
*/
- force_reset = pm_resume_via_firmware();
+ want_reset = pm_resume_via_firmware();
- return i8042_controller_resume(force_reset);
+ return i8042_controller_resume(want_reset);
}
static int i8042_pm_thaw(struct device *dev)
@@ -1482,7 +1515,7 @@ static int __init i8042_probe(struct platform_device *dev)
i8042_platform_device = dev;
- if (i8042_reset) {
+ if (i8042_reset == I8042_RESET_ALWAYS) {
error = i8042_controller_selftest();
if (error)
return error;