[PATCH] Specify all interrupts for the GPIO controller.

[Vijay Kumar B]

The PXA GPIO controller has 3 interrupt outputs, this needs to be
indicated in the DTS file. Without this mainstone's CPLD interrupt 0
will not be raised to the processor.

Signed-off-by: Vijay Kumar B. <vijaykumar@xxxxxxxxxxx>
Reviewed-by: Deepak S. <deepak@xxxxxxxxxxx>
---
 arch/arm/boot/dts/pxa2xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 5e5af07..9ca2e5b 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -54,8 +54,8 @@
 			reg = <0x40e00000 0x10000>;
 			gpio-controller;
 			#gpio-cells = <0x2>;
-			interrupts = <10>;
-			interrupt-names = "gpio_mux";
+			interrupts = <8 9 10>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 			ranges;
-- 
2.1.4