Re: [PATCH v6 1/3] usb: ohci-da8xx: Remove code that references mach
From: Kevin Hilman
Date: Tue Oct 04 2016 - 05:18:22 EST
Hi Greg,
On Mon, Sep 5, 2016 at 10:00 PM, David Lechner <david@xxxxxxxxxxxxxx> wrote:
> Including mach/* is frowned upon in device drivers, so get rid of it.
>
> This replaces usb20_clk and code that pokes CFGCHIP2 with a proper phy
> driver.
>
> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
> Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Can you pick up this patch?
Patches 2 & 3 from this series were picked up by Bin for musb, but
this one is still outstanding.
Thanks,
Kevin
> ---
> drivers/usb/host/Kconfig | 1 +
> drivers/usb/host/ohci-da8xx.c | 102 +++++++++++++++++++++++-------------------
> 2 files changed, 56 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 2e710a4..1f0cdab8 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -482,6 +482,7 @@ config USB_OHCI_HCD_DAVINCI
> bool "OHCI support for TI DaVinci DA8xx"
> depends on ARCH_DAVINCI_DA8XX
> depends on USB_OHCI_HCD=y
> + select PHY_DA8XX_USB
> default y
> help
> Enables support for the DaVinci DA8xx integrated OHCI
> diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
> index e5c33bc..3656d7c 100644
> --- a/drivers/usb/host/ohci-da8xx.c
> +++ b/drivers/usb/host/ohci-da8xx.c
> @@ -15,58 +15,50 @@
> #include <linux/jiffies.h>
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> -
> -#include <mach/da8xx.h>
> +#include <linux/phy/phy.h>
> #include <linux/platform_data/usb-davinci.h>
>
> #ifndef CONFIG_ARCH_DAVINCI_DA8XX
> #error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX."
> #endif
>
> -#define CFGCHIP2 DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
> -
> static struct clk *usb11_clk;
> -static struct clk *usb20_clk;
> +static struct phy *usb11_phy;
>
> /* Over-current indicator change bitmask */
> static volatile u16 ocic_mask;
>
> -static void ohci_da8xx_clock(int on)
> +static int ohci_da8xx_enable(void)
> {
> - u32 cfgchip2;
> -
> - cfgchip2 = __raw_readl(CFGCHIP2);
> - if (on) {
> - clk_enable(usb11_clk);
> -
> - /*
> - * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we
> - * need to enable the USB 2.0 module clocking, start its PHY,
> - * and not allow it to stop the clock during USB 2.0 suspend.
> - */
> - if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) {
> - clk_enable(usb20_clk);
> -
> - cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
> - cfgchip2 |= CFGCHIP2_PHY_PLLON;
> - __raw_writel(cfgchip2, CFGCHIP2);
> -
> - pr_info("Waiting for USB PHY clock good...\n");
> - while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
> - cpu_relax();
> - }
> + int ret;
>
> - /* Enable USB 1.1 PHY */
> - cfgchip2 |= CFGCHIP2_USB1SUSPENDM;
> - } else {
> - clk_disable(usb11_clk);
> - if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX))
> - clk_disable(usb20_clk);
> + ret = clk_prepare_enable(usb11_clk);
> + if (ret)
> + return ret;
>
> - /* Disable USB 1.1 PHY */
> - cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM;
> - }
> - __raw_writel(cfgchip2, CFGCHIP2);
> + ret = phy_init(usb11_phy);
> + if (ret)
> + goto err_phy_init;
> +
> + ret = phy_power_on(usb11_phy);
> + if (ret)
> + goto err_phy_power_on;
> +
> + return 0;
> +
> +err_phy_power_on:
> + phy_exit(usb11_phy);
> +err_phy_init:
> + clk_disable_unprepare(usb11_clk);
> +
> + return ret;
> +}
> +
> +static void ohci_da8xx_disable(void)
> +{
> + phy_power_off(usb11_phy);
> + phy_exit(usb11_phy);
> + clk_disable_unprepare(usb11_clk);
> }
>
> /*
> @@ -92,7 +84,9 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
>
> dev_dbg(dev, "starting USB controller\n");
>
> - ohci_da8xx_clock(1);
> + result = ohci_da8xx_enable();
> + if (result < 0)
> + return result;
>
> /*
> * DA8xx only have 1 port connected to the pins but the HC root hub
> @@ -101,8 +95,10 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
> ohci->num_ports = 1;
>
> result = ohci_init(ohci);
> - if (result < 0)
> + if (result < 0) {
> + ohci_da8xx_disable();
> return result;
> + }
>
> /*
> * Since we're providing a board-specific root hub port power control
> @@ -129,7 +125,7 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
> static void ohci_da8xx_stop(struct usb_hcd *hcd)
> {
> ohci_stop(hcd);
> - ohci_da8xx_clock(0);
> + ohci_da8xx_disable();
> }
>
> static int ohci_da8xx_start(struct usb_hcd *hcd)
> @@ -301,12 +297,18 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
> return -ENODEV;
>
> usb11_clk = devm_clk_get(&pdev->dev, "usb11");
> - if (IS_ERR(usb11_clk))
> + if (IS_ERR(usb11_clk)) {
> + if (PTR_ERR(usb11_clk) != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to get clock.\n");
> return PTR_ERR(usb11_clk);
> + }
>
> - usb20_clk = devm_clk_get(&pdev->dev, "usb20");
> - if (IS_ERR(usb20_clk))
> - return PTR_ERR(usb20_clk);
> + usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
> + if (IS_ERR(usb11_phy)) {
> + if (PTR_ERR(usb11_phy) != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to get phy.\n");
> + return PTR_ERR(usb11_phy);
> + }
>
> hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
> if (!hcd)
> @@ -316,6 +318,7 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
> hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
> if (IS_ERR(hcd->regs)) {
> error = PTR_ERR(hcd->regs);
> + dev_err(&pdev->dev, "failed to map ohci.\n");
> goto err;
> }
> hcd->rsrc_start = mem->start;
> @@ -397,7 +400,7 @@ static int ohci_da8xx_suspend(struct platform_device *pdev,
> if (ret)
> return ret;
>
> - ohci_da8xx_clock(0);
> + ohci_da8xx_disable();
> hcd->state = HC_STATE_SUSPENDED;
>
> return ret;
> @@ -407,14 +410,19 @@ static int ohci_da8xx_resume(struct platform_device *dev)
> {
> struct usb_hcd *hcd = platform_get_drvdata(dev);
> struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> + int ret;
>
> if (time_before(jiffies, ohci->next_statechange))
> msleep(5);
> ohci->next_statechange = jiffies;
>
> - ohci_da8xx_clock(1);
> + ret = ohci_da8xx_enable();
> + if (ret)
> + return ret;
> +
> dev->dev.power.power_state = PMSG_ON;
> usb_hcd_resume_root_hub(hcd);
> +
> return 0;
> }
> #endif
> --
> 2.7.4
>