[PATCH 08/14] dt-bindings: sound: Add sun8i analog codec documentation

[MylÃne Josserand]

Add the documentation for dt-binding of the analog audiocodec
driver for SUN8I SoC.

Signed-off-by: MylÃne Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/sound/sun8i-codec-analog.txt | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt

diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
new file mode 100644
index 0000000..a03ec20
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
@@ -0,0 +1,20 @@
+* Allwinner A23/A33 Analog Codec
+
+This codec must be handled as a PRCM subnode.
+
+Required properties:
+- compatible: must be either "allwinner,sun8i-codec-analog"
+- interrupts: must contain the codec interrupt
+- clocks: a list of phandle + clock-specifer pairs, one for each entry
+  in clock-names.
+- clock-names: should contain followings:
+   - "apb": the parent APB clock for this controller
+   - "codec": the parent module clock
+
+Example, in your prcm subnode:
+codec_analog: codec_analog {
+	compatible = "allwinner,sun8i-codec-analog";
+	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+	clock-names = "apb", "codec";
+};
-- 
2.9.3