Re: [PATCH] MIPS: ath79: Add initial support for the HAPROXY Aloha Pocket board

[Neil Armstrong]

On 10/04/2016 12:09 PM, Yegor Yefremov wrote:
> Hi Neil,
> 
> On Tue, Oct 4, 2016 at 11:40 AM, Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>> On 10/04/2016 11:09 AM, Alban wrote:
>>> On Mon,  3 Oct 2016 17:35:31 +0200
>>> Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>>>
>>>> The HAPROXY Aloha pocket board is a Load Balancer demo board based on the
>>>> Atheros AR9331 SoC with 64Mbytes DDR and 16Mbytes on-board SPI Flash.
>>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>>>
>>> Please use device tree instead of adding another board file.
>>>
>>> Alban
>>>
>>
>> Hi Alban,
>>
>> I'm quite surprised since it seems no device tree support is available for ath79,
>> I would really like to have device tree for this board, but this is only a copy/paste of
>> the mach-ap121 with button/leds gpio differences.
>>
>> Could it be possible to merge it ? I would be happy to support this board once device tree
>> support is landed on the mips tree !
> 
> Take a look at these DTS files from the current Linux tree:
> 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
> 
> etc.
> 
> Regards,
> Yegor
> 

My bad, the qca naming is really disturbing.

I will push a dts instead.

Thanks,
Neil