[PATCH v2 0/5] drm/fsl-dcu: initialization fixes

[Stefan Agner]

Hi All,

This is an assortment of fixes which solve issues seen using an
external RGB converter and makes sure that pixel clock is only
on when really required.

Meng, would be good if you can test it on a LS1021a.

--
Stefan

Changes since v1:
- add patch to no not transfer registers in mode_set_nofb
- add patch which only init fbdev if required
- remove disable unprepare pixel clock on module remove (already disabled
  in CRTC disable callback).
- remove unused label

Stefan Agner (5):
  drm/fsl-dcu: enable TCON bypass mode by default
  drm/fsl-dcu: do not transfer registers on plane init
  drm/fsl-dcu: do not transfer registers in mode_set_nofb
  drm/fsl-dcu: enable pixel clock when enabling CRTC
  drm/fsl-dcu: only init fbdev if required

 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c  |  4 +--
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c   | 25 +++----------------
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c |  5 ----
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c   | 38 +++--------------------------
 4 files changed, 10 insertions(+), 62 deletions(-)

-- 
2.10.0