Re: [PATCH 08/10] mtd: flash-sam: Bindings for Juniper's SAM FPGA flash

[Rob Herring]

gOn Fri, Oct 07, 2016 at 06:18:36PM +0300, Pantelis Antoniou wrote:
> From: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> 
> Add binding document for Junipers Flash IP block present
> in the SAM FPGA on PTX series of routers.
> 
> Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mtd/flash-sam.txt          | 31 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/flash-sam.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/flash-sam.txt b/Documentation/devicetree/bindings/mtd/flash-sam.txt
> new file mode 100644
> index 0000000..bdf1d78
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/flash-sam.txt
> @@ -0,0 +1,31 @@
> +Flash device on a Juniper SAM FPGA
> +
> +These flash chips are found in the PTX series of Juniper routers.
> +
> +They are regular CFI compatible (Intel or AMD extended) flash chips with
> +some special write protect/VPP bits that can be controlled by the machine's
> +system controller.

And where's the description of the sys ctrlr?

> +
> +Required properties:
> +- compatible : must be "jnx,flash-sam"
> +
> +Optional properties:
> +- reg : memory address for the flash chip, note that this is not
> +required since usually the device is a subdevice of the SAM MFD
> +driver which fills in the register fields.
> +
> +For the rest of the properties, see mtd-physmap.txt.
> +
> +The device tree may optionally contain sub-nodes describing partitions of the
> +address space. See partition.txt for more detail.
> +
> +Example:
> +
> +flash_sam {
> +	compatible = "jnx,flash-sam";
> +	partition@0 {

This should have a heirarchy of a controller node, a flash child node, 
partitions child node, and partition child nodes.

> +		reg = <0x0 0x400000>;
> +		label = "pic0-golden";
> +		read-only;
> +	};
> +};
> -- 
> 1.9.1
>