Re: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings

[Peter Rosin]

On 2016-10-07 17:21, Pantelis Antoniou wrote:
> From: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> 
> Add binding document for the i2c mux driver of Juniper's I2CS FPGA.
> 
> Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt   | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
> new file mode 100644
> index 0000000..03d917f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
> @@ -0,0 +1,27 @@
> +* Juniper I2C Mux on I2CS
> +
> +	I2C mux driver for switching the RE access to the FPC i2c bus.
> +	Compatible with the FPC variant of the I2CS.
> +
> +Required properties:
> +
> +  - compatible: "jnx,i2cs-mux-i2cs".

jnx,i2c-mux-i2cs

> +
> +The following required properties are defined externally:
> +
> +  - Standard I2C mux properties. See i2c-mux.txt in this directory.

To accommodate changes pending for 4.9, change "mux" to "gate" in
this line...

> +  - I2C child bus nodes. See i2c-mux.txt in this directory.

This line is wrong since the child nodes themselves are optional in
i2c-gate.txt (and i2c-mux.txt). I guess you can just drop it since
the child nodes are mentioned in i2c-gate.txt (and i2c-mux.txt).

> +
> +Example:
> +
> +fpc0_mux {
> +	compatible = "jnx,i2c-mux-i2cs";
> +	#address-cells = <1>;
> +	#size-cells = <0>;

...drop these two...

> +
> +	fpc0i2c0: i2c@0 {

...change i2c@0 to i2c-gate...

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <0>;

...and drop reg.

Cheers,
Peter

> +	};
> +};
>