[PATCH v2 15/31] dtt200u: don't do DMA on stack
From: Mauro Carvalho Chehab
Date: Tue Oct 11 2016 - 06:13:23 EST
From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.
Reviewed-By: Patrick Boettcher <patrick.boettcher@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
drivers/media/usb/dvb-usb/dtt200u.c | 104 ++++++++++++++++++++++++++----------
1 file changed, 75 insertions(+), 29 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c
index d2a01b50af0d..7706938b5167 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.c
+++ b/drivers/media/usb/dvb-usb/dtt200u.c
@@ -20,74 +20,103 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+struct dtt200u_state {
+ unsigned char data[80];
+ struct mutex data_mutex;
+};
+
static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff)
{
- u8 b = SET_INIT;
+ struct dtt200u_state *st = d->priv;
+
+ mutex_lock(&st->data_mutex);
+
+ st->data[0] = SET_INIT;
if (onoff)
- dvb_usb_generic_write(d,&b,2);
+ dvb_usb_generic_write(d, st->data, 2);
+ mutex_unlock(&st->data_mutex);
return 0;
}
static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
- u8 b_streaming[2] = { SET_STREAMING, onoff };
- u8 b_rst_pid = RESET_PID_FILTER;
+ struct dtt200u_state *st = adap->dev->priv;
- dvb_usb_generic_write(adap->dev, b_streaming, 2);
+ mutex_lock(&st->data_mutex);
+ st->data[0] = SET_STREAMING;
+ st->data[1] = onoff;
+
+ dvb_usb_generic_write(adap->dev, st->data, 2);
+
+ if (onoff)
+ return 0;
+
+ st->data[0] = RESET_PID_FILTER;
+ dvb_usb_generic_write(adap->dev, st->data, 1);
+
+ mutex_unlock(&st->data_mutex);
- if (onoff == 0)
- dvb_usb_generic_write(adap->dev, &b_rst_pid, 1);
return 0;
}
static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
{
- u8 b_pid[4];
+ struct dtt200u_state *st = adap->dev->priv;
+ int ret;
+
pid = onoff ? pid : 0;
- b_pid[0] = SET_PID_FILTER;
- b_pid[1] = index;
- b_pid[2] = pid & 0xff;
- b_pid[3] = (pid >> 8) & 0x1f;
+ mutex_lock(&st->data_mutex);
+ st->data[0] = SET_PID_FILTER;
+ st->data[1] = index;
+ st->data[2] = pid & 0xff;
+ st->data[3] = (pid >> 8) & 0x1f;
- return dvb_usb_generic_write(adap->dev, b_pid, 4);
+ ret = dvb_usb_generic_write(adap->dev, st->data, 4);
+ mutex_unlock(&st->data_mutex);
+
+ return ret;
}
static int dtt200u_rc_query(struct dvb_usb_device *d)
{
- u8 key[5],cmd = GET_RC_CODE;
+ struct dtt200u_state *st = d->priv;
u32 scancode;
- dvb_usb_generic_rw(d,&cmd,1,key,5,0);
- if (key[0] == 1) {
+ mutex_lock(&st->data_mutex);
+ st->data[0] = GET_RC_CODE;
+
+ dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+ if (st->data[0] == 1) {
enum rc_type proto = RC_TYPE_NEC;
- scancode = key[1];
- if ((u8) ~key[1] != key[2]) {
+ scancode = st->data[1];
+ if ((u8) ~st->data[1] != st->data[2]) {
/* Extended NEC */
scancode = scancode << 8;
- scancode |= key[2];
+ scancode |= st->data[2];
proto = RC_TYPE_NECX;
}
scancode = scancode << 8;
- scancode |= key[3];
+ scancode |= st->data[3];
/* Check command checksum is ok */
- if ((u8) ~key[3] == key[4])
+ if ((u8) ~st->data[3] == st->data[4])
rc_keydown(d->rc_dev, proto, scancode, 0);
else
rc_keyup(d->rc_dev);
- } else if (key[0] == 2) {
+ } else if (st->data[0] == 2) {
rc_repeat(d->rc_dev);
} else {
rc_keyup(d->rc_dev);
}
- if (key[0] != 0)
- deb_info("key: %*ph\n", 5, key);
+ if (st->data[0] != 0)
+ deb_info("st->data: %*ph\n", 5, st->data);
+ mutex_unlock(&st->data_mutex);
return 0;
}
@@ -106,17 +135,24 @@ static struct dvb_usb_device_properties wt220u_miglia_properties;
static int dtt200u_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ struct dvb_usb_device *d;
+ struct dtt200u_state *st;
+
if (0 == dvb_usb_device_init(intf, &dtt200u_properties,
- THIS_MODULE, NULL, adapter_nr) ||
+ THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &wt220u_properties,
- THIS_MODULE, NULL, adapter_nr) ||
+ THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &wt220u_fc_properties,
- THIS_MODULE, NULL, adapter_nr) ||
+ THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties,
- THIS_MODULE, NULL, adapter_nr) ||
+ THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &wt220u_miglia_properties,
- THIS_MODULE, NULL, adapter_nr))
+ THIS_MODULE, &d, adapter_nr)) {
+ st = d->priv;
+ mutex_init(&st->data_mutex);
+
return 0;
+ }
return -ENODEV;
}
@@ -140,6 +176,8 @@ static struct dvb_usb_device_properties dtt200u_properties = {
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-dtt200u-01.fw",
+ .size_of_priv = sizeof(struct dtt200u_state),
+
.num_adapters = 1,
.adapter = {
{
@@ -190,6 +228,8 @@ static struct dvb_usb_device_properties wt220u_properties = {
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-wt220u-02.fw",
+ .size_of_priv = sizeof(struct dtt200u_state),
+
.num_adapters = 1,
.adapter = {
{
@@ -240,6 +280,8 @@ static struct dvb_usb_device_properties wt220u_fc_properties = {
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-wt220u-fc03.fw",
+ .size_of_priv = sizeof(struct dtt200u_state),
+
.num_adapters = 1,
.adapter = {
{
@@ -290,6 +332,8 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-wt220u-zl0353-01.fw",
+ .size_of_priv = sizeof(struct dtt200u_state),
+
.num_adapters = 1,
.adapter = {
{
@@ -340,6 +384,8 @@ static struct dvb_usb_device_properties wt220u_miglia_properties = {
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-wt220u-miglia-01.fw",
+ .size_of_priv = sizeof(struct dtt200u_state),
+
.num_adapters = 1,
.generic_bulk_ctrl_endpoint = 0x01,
--
2.7.4