Re: [PATCH 6/10] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
From: Adrian Hunter
Date: Tue Oct 11 2016 - 08:45:28 EST
On 07/10/16 18:22, Gregory CLEMENT wrote:
> From: Ziji Hu <huziji@xxxxxxxxxxx>
>
> Add Xenon eMMC/SD/SDIO host controller core functionality.
> Add Xenon specific intialization process.
> Add Xenon specific mmc_host_ops APIs.
> Add Xenon specific register definitions.
>
> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
>
> Marvell Xenon SDHC conforms to SD Physical Layer Specification
> Version 3.01 and is designed according to the guidelines provided
> in the SD Host Controller Standard Specification Version 3.00.
>
> Signed-off-by: Hu Ziji <huziji@xxxxxxxxxxx>
> Reviewed-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
I looked at a couple of things but you need to sort out the issues with
card_candidate before going further.
> ---
> MAINTAINERS | 1 +-
> drivers/mmc/host/Kconfig | 9 +-
> drivers/mmc/host/Makefile | 3 +-
> drivers/mmc/host/sdhci-xenon.c | 599 ++++++++++++++++++++++++++++++++++-
> drivers/mmc/host/sdhci-xenon.h | 134 ++++++++-
> 5 files changed, 746 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mmc/host/sdhci-xenon.c
> create mode 100644 drivers/mmc/host/sdhci-xenon.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4aa0eac9bfc7..859420e5dfd3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7582,6 +7582,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
> M: Ziji Hu <huziji@xxxxxxxxxxx>
> L: linux-mmc@xxxxxxxxxxxxxxx
> S: Supported
> +F: drivers/mmc/host/sdhci-xenon.*
> F: Documentation/devicetree/bindings/mmc/marvell,sdhci-xenon.txt
>
> MATROX FRAMEBUFFER DRIVER
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 5274f503a39a..85a53623526a 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -798,3 +798,12 @@ config MMC_SDHCI_BRCMSTB
> Broadcom STB SoCs.
>
> If unsure, say Y.
> +
> +config MMC_SDHCI_XENON
> + tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
> + depends on MMC_SDHCI && MMC_SDHCI_PLTFM
> + help
> + This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
> + If you have a machine with integrated Marvell Xenon SDHC IP,
> + say Y or M here.
> + If unsure, say N.
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index e2bdaaf43184..75eaf743486c 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -80,3 +80,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o
> ifeq ($(CONFIG_CB710_DEBUG),y)
> CFLAGS-cb710-mmc += -DDEBUG
> endif
> +
> +obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o
> +sdhci-xenon-driver-y += sdhci-xenon.o
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> new file mode 100644
> index 000000000000..03ba183494d3
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -0,0 +1,599 @@
> +/*
> + * Driver for Marvell SOC Platform Group Xenon SDHC as a platform device
> + *
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author: Hu Ziji <huziji@xxxxxxxxxxx>
> + * Date: 2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * Inspired by Jisheng Zhang <jszhang@xxxxxxxxxxx>
> + * Special thanks to Video BG4 project team.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/sdio.h>
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/host.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +
> +#include "sdhci-pltfm.h"
> +#include "sdhci.h"
> +#include "sdhci-xenon.h"
> +
> +/* Set SDCLK-off-while-idle */
> +static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
> + unsigned char slot_idx, bool enable)
> +{
> + u32 reg;
> + u32 mask;
> +
> + reg = sdhci_readl(host, SDHC_SYS_OP_CTRL);
> + /* Get the bit shift basing on the slot index */
> + mask = (0x1 << (SDCLK_IDLEOFF_ENABLE_SHIFT + slot_idx));
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> +
> + sdhci_writel(host, reg, SDHC_SYS_OP_CTRL);
> +}
> +
> +/* Enable/Disable the Auto Clock Gating function */
> +static void xenon_set_acg(struct sdhci_host *host, bool enable)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, SDHC_SYS_OP_CTRL);
> + if (enable)
> + reg &= ~AUTO_CLKGATE_DISABLE_MASK;
> + else
> + reg |= AUTO_CLKGATE_DISABLE_MASK;
> + sdhci_writel(host, reg, SDHC_SYS_OP_CTRL);
> +}
> +
> +/* Enable this slot */
> +static void xenon_enable_slot(struct sdhci_host *host,
> + unsigned char slot_idx)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, SDHC_SYS_OP_CTRL);
> + reg |= (BIT(slot_idx) << SLOT_ENABLE_SHIFT);
> + sdhci_writel(host, reg, SDHC_SYS_OP_CTRL);
> +
> + /*
> + * Manually set the flag which all the slots require,
> + * including SD, eMMC, SDIO
> + */
> + host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
> +}
> +
> +/* Disable this slot */
> +static void xenon_disable_slot(struct sdhci_host *host,
> + unsigned char slot_idx)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, SDHC_SYS_OP_CTRL);
> + reg &= ~(BIT(slot_idx) << SLOT_ENABLE_SHIFT);
> + sdhci_writel(host, reg, SDHC_SYS_OP_CTRL);
> +}
> +
> +/* Enable Parallel Transfer Mode */
> +static void xenon_enable_slot_parallel_tran(struct sdhci_host *host,
> + unsigned char slot_idx)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, SDHC_SYS_EXT_OP_CTRL);
> + reg |= BIT(slot_idx);
> + sdhci_writel(host, reg, SDHC_SYS_EXT_OP_CTRL);
> +}
> +
> +static void xenon_slot_tuning_setup(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u32 reg;
> +
> + /* Disable the Re-Tuning Request functionality */
> + reg = sdhci_readl(host, SDHC_SLOT_RETUNING_REQ_CTRL);
> + reg &= ~RETUNING_COMPATIBLE;
> + sdhci_writel(host, reg, SDHC_SLOT_RETUNING_REQ_CTRL);
> +
> + /* Disbale the Re-tuning Event Signal Enable */
Disbale -> Disable
> + reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
> + reg &= ~SDHCI_INT_RETUNE;
> + sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
> +
> + /* Force to use Tuning Mode 1 */
> + host->tuning_mode = SDHCI_TUNING_MODE_1;
> + /* Set re-tuning period */
> + host->tuning_count = 1 << (priv->tuning_count - 1);
> +}
> +
> +/*
> + * Operations inside struct sdhci_ops
> + */
> +/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
> +static void sdhci_xenon_reset_exit(struct sdhci_host *host,
> + unsigned char slot_idx, u8 mask)
> +{
> + /* Only SOFTWARE RESET ALL will clear the register setting */
> + if (!(mask & SDHCI_RESET_ALL))
> + return;
> +
> + /* Disable tuning request and auto-retuing again */
retuing -> retuning
> + xenon_slot_tuning_setup(host);
> +
> + xenon_set_acg(host, true);
> +
> + xenon_set_sdclk_off_idle(host, slot_idx, false);
> +}
> +
> +static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + sdhci_reset(host, mask);
> + sdhci_xenon_reset_exit(host, priv->slot_idx, mask);
> +}
> +
> +/*
> + * Xenon defines different values for HS200 and SDR104
> + * in Host_Control_2
> + */
> +static void xenon_set_uhs_signaling(struct sdhci_host *host,
> + unsigned int timing)
> +{
> + u16 ctrl_2;
> +
> + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + /* Select Bus Speed Mode for host */
> + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
> + if (timing == MMC_TIMING_MMC_HS200)
> + ctrl_2 |= XENON_SDHCI_CTRL_HS200;
> + else if (timing == MMC_TIMING_UHS_SDR104)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
> + else if (timing == MMC_TIMING_UHS_SDR12)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
> + else if (timing == MMC_TIMING_UHS_SDR25)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
> + else if (timing == MMC_TIMING_UHS_SDR50)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
> + else if ((timing == MMC_TIMING_UHS_DDR50) ||
> + (timing == MMC_TIMING_MMC_DDR52))
> + ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
> + else if (timing == MMC_TIMING_MMC_HS400)
> + ctrl_2 |= XENON_SDHCI_CTRL_HS400;
> + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> +}
> +
> +static const struct sdhci_ops sdhci_xenon_ops = {
> + .set_clock = sdhci_set_clock,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_xenon_reset,
> + .set_uhs_signaling = xenon_set_uhs_signaling,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> +};
> +
> +static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
> + .ops = &sdhci_xenon_ops,
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
> + SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
> + SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
> + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> +};
> +
> +/*
> + * Xenon Specific Operations in mmc_host_ops
> + */
> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + unsigned long flags;
> +
> + /*
> + * HS400/HS200/eMMC HS doesn't have Preset Value register.
> + * However, sdhci_set_ios will read HS400/HS200 Preset register.
> + * Disable Preset Value register for HS400/HS200.
> + * eMMC HS with preset_enabled set will trigger a bug in
> + * get_preset_value().
> + */
> + spin_lock_irqsave(&host->lock, flags);
> + if ((ios->timing == MMC_TIMING_MMC_HS400) ||
> + (ios->timing == MMC_TIMING_MMC_HS200) ||
> + (ios->timing == MMC_TIMING_MMC_HS)) {
> + host->preset_enabled = false;
> + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> + } else {
> + host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> + }
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + sdhci_set_ios(mmc, ios);
> +
> + if (host->clock > DEFAULT_SDCLK_FREQ) {
> + spin_lock_irqsave(&host->lock, flags);
> + xenon_set_sdclk_off_idle(host, priv->slot_idx, true);
> + spin_unlock_irqrestore(&host->lock, flags);
> + }
> +}
> +
> +static int __emmc_signal_voltage_switch(struct mmc_host *mmc,
> + const unsigned char signal_voltage)
> +{
> + u32 ctrl;
> + unsigned char voltage_code;
> + struct sdhci_host *host = mmc_priv(mmc);
> +
> + if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
> + voltage_code = EMMC_VCCQ_3_3V;
> + else if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
> + voltage_code = EMMC_VCCQ_1_8V;
> + else
> + return -EINVAL;
> +
> + /*
> + * This host is for eMMC, XENON self-defined
> + * eMMC slot control register should be accessed
> + * instead of Host Control 2
> + */
> + ctrl = sdhci_readl(host, SDHC_SLOT_EMMC_CTRL);
> + ctrl &= ~EMMC_VCCQ_MASK;
> + ctrl |= voltage_code;
> + sdhci_writel(host, ctrl, SDHC_SLOT_EMMC_CTRL);
> +
> + /* There is no standard to determine this waiting period */
> + usleep_range(1000, 2000);
> +
> + /* Check whether io voltage switch is done */
> + ctrl = sdhci_readl(host, SDHC_SLOT_EMMC_CTRL);
> + ctrl &= EMMC_VCCQ_MASK;
> + /*
> + * This bit is set only when regulator feeds back the voltage switch
> + * results to Xenon SDHC.
> + * However, in actaul implementation, regulator might not provide
> + * this feedback.
> + * Thus we shall not rely on this bit to determine if switch failed.
> + * If the bit is not set, just throw a message.
> + * Besides, error code should not be returned.
> + */
> + if (ctrl != voltage_code)
> + dev_info(mmc_dev(mmc), "fail to detect eMMC signal voltage stable\n");
> + return 0;
> +}
> +
> +static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc,
> + struct mmc_ios *ios)
> +{
> + unsigned char voltage = ios->signal_voltage;
> +
> + if ((voltage == MMC_SIGNAL_VOLTAGE_330) ||
> + (voltage == MMC_SIGNAL_VOLTAGE_180))
> + return __emmc_signal_voltage_switch(mmc, voltage);
> +
> + dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n",
> + voltage);
> + return -EINVAL;
> +}
> +
> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
> + struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + /*
> + * Before SD/SDIO set signal voltage, SD bus clock should be
> + * disabled. However, sdhci_set_clock will also disable the Internal
> + * clock in mmc_set_signal_voltage().
> + * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
> + * Thus here manually enable internal clock.
> + *
> + * After switch completes, it is unnecessary to disable internal clock,
> + * since keeping internal clock active obeys SD spec.
> + */
> + enable_xenon_internal_clk(host);
> +
> + if (priv->card_candidate) {
mmc_power_up() calls __mmc_set_signal_voltage() calls
host->ops->start_signal_voltage_switch so priv->card_candidate could be an
invalid reference to an old card.
So that's not going to work if the card changes - not only for removable
cards but even for eMMC if init fails and retries.
> + if (mmc_card_mmc(priv->card_candidate))
> + return xenon_emmc_signal_voltage_switch(mmc, ios);
So if all you need to know is whether it is a eMMC, why can't DT tell you?
> + }
> +
> + return sdhci_start_signal_voltage_switch(mmc, ios);
> +}
> +
> +/*
> + * After determining which slot is used for SDIO,
> + * some additional task is required.
> + */
> +static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + u32 reg;
> + u8 slot_idx;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + /* Link the card for delay adjustment */
> + priv->card_candidate = card;
You really need a better way to get the card. I suggest you take up the
issue with Ulf. One possibility is to have mmc core set host->card = card
much earlier.
> + /* Set tuning functionality of this slot */
> + xenon_slot_tuning_setup(host);
> +
> + slot_idx = priv->slot_idx;
> + if (!mmc_card_sdio(card)) {
> + /* Re-enable the Auto-CMD12 cap flag. */
> + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
> + host->flags |= SDHCI_AUTO_CMD12;
> +
> + /* Clear SDIO Card Inserted indication */
> + reg = sdhci_readl(host, SDHC_SYS_CFG_INFO);
> + reg &= ~(1 << (slot_idx + SLOT_TYPE_SDIO_SHIFT));
> + sdhci_writel(host, reg, SDHC_SYS_CFG_INFO);
> +
> + if (mmc_card_mmc(card)) {
> + mmc->caps |= MMC_CAP_NONREMOVABLE;
> + if (!(host->quirks2 & SDHCI_QUIRK2_NO_1_8_V))
> + mmc->caps |= MMC_CAP_1_8V_DDR;
> + /*
> + * Force to clear BUS_TEST to
> + * skip bus_test_pre and bus_test_post
> + */
> + mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
> + mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ |
> + MMC_CAP2_PACKED_CMD;
> + if (mmc->caps & MMC_CAP_8_BIT_DATA)
> + mmc->caps2 |= MMC_CAP2_HS400_1_8V;
> + }
> + } else {
> + /*
> + * Delete the Auto-CMD12 cap flag.
> + * Otherwise, when sending multi-block CMD53,
> + * Driver will set Transfer Mode Register to enable Auto CMD12.
> + * However, SDIO device cannot recognize CMD12.
> + * Thus SDHC will time-out for waiting for CMD12 response.
> + */
> + host->quirks &= ~SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
> + host->flags &= ~SDHCI_AUTO_CMD12;
sdhci_set_transfer_mode() won't enable auto-CMD12 for CMD53 anyway, so is
this needed?
> +
> + /*
> + * Set SDIO Card Inserted indication
> + * to inform that the current slot is for SDIO
> + */
> + reg = sdhci_readl(host, SDHC_SYS_CFG_INFO);
> + reg |= (1 << (slot_idx + SLOT_TYPE_SDIO_SHIFT));
> + sdhci_writel(host, reg, SDHC_SYS_CFG_INFO);
> + }
> +}
> +
> +static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> +
> + if (host->timing == MMC_TIMING_UHS_DDR50)
> + return 0;
> +
> + return sdhci_execute_tuning(mmc, opcode);
> +}
> +
> +static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
> +{
> + host->mmc_host_ops.set_ios = xenon_set_ios;
> + host->mmc_host_ops.start_signal_voltage_switch =
> + xenon_start_signal_voltage_switch;
> + host->mmc_host_ops.init_card = xenon_init_card;
> + host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
> +}
> +
> +static int xenon_probe_dt(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct mmc_host *mmc = host->mmc;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + int err;
> + u32 slot_idx, nr_slot;
> + u32 tuning_count;
> + u32 reg;
> +
> + /* Standard MMC property */
> + err = mmc_of_parse(mmc);
> + if (err)
> + return err;
> +
> + /* Standard SDHCI property */
> + sdhci_get_of_property(pdev);
> +
> + /*
> + * Xenon Specific property:
> + * slotno: the index of slot. Refer to SDHC_SYS_CFG_INFO register
> + * tuning-count: the interval between re-tuning
> + * PHY type: "sdhc phy", "emmc phy 5.0" or "emmc phy 5.1"
> + */
> + if (!of_property_read_u32(np, "xenon,slotno", &slot_idx)) {
> + nr_slot = sdhci_readl(host, SDHC_SYS_CFG_INFO);
> + nr_slot &= NR_SUPPORTED_SLOT_MASK;
> + if (unlikely(slot_idx > nr_slot)) {
> + dev_err(mmc_dev(mmc), "Slot Index %d exceeds Number of slots %d\n",
> + slot_idx, nr_slot);
> + return -EINVAL;
> + }
> + } else {
> + priv->slot_idx = 0x0;
> + }
> +
> + if (!of_property_read_u32(np, "xenon,tuning-count", &tuning_count)) {
> + if (unlikely(tuning_count >= TMR_RETUN_NO_PRESENT)) {
> + dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
> + DEF_TUNING_COUNT);
> + tuning_count = DEF_TUNING_COUNT;
> + }
> + } else {
> + priv->tuning_count = DEF_TUNING_COUNT;
> + }
> +
> + if (of_property_read_bool(np, "xenon,mask-conflict-err")) {
> + reg = sdhci_readl(host, SDHC_SYS_EXT_OP_CTRL);
> + reg |= MASK_CMD_CONFLICT_ERROR;
> + sdhci_writel(host, reg, SDHC_SYS_EXT_OP_CTRL);
> + }
> +
> + return err;
> +}
> +
> +static int xenon_slot_probe(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u8 slot_idx = priv->slot_idx;
> +
> + /* Enable slot */
> + xenon_enable_slot(host, slot_idx);
> +
> + /* Enable ACG */
> + xenon_set_acg(host, true);
> +
> + /* Enable Parallel Transfer Mode */
> + xenon_enable_slot_parallel_tran(host, slot_idx);
> +
> + priv->timing = MMC_TIMING_FAKE;
> + priv->clock = 0;
> +
> + return 0;
> +}
> +
> +static void xenon_slot_remove(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u8 slot_idx = priv->slot_idx;
> +
> + /* disable slot */
> + xenon_disable_slot(host, slot_idx);
> +}
> +
> +static int sdhci_xenon_probe(struct platform_device *pdev)
> +{
> + struct sdhci_pltfm_host *pltfm_host;
> + struct sdhci_host *host;
> + struct clk *clk, *axi_clk;
> + struct sdhci_xenon_priv *priv;
> + int err;
> +
> + host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
> + sizeof(struct sdhci_xenon_priv));
> + if (IS_ERR(host))
> + return PTR_ERR(host);
> +
> + pltfm_host = sdhci_priv(host);
> + priv = sdhci_pltfm_priv(pltfm_host);
> +
> + xenon_set_acg(host, false);
> +
> + /*
> + * Link Xenon specific mmc_host_ops function,
> + * to replace standard ones in sdhci_ops.
> + */
> + xenon_replace_mmc_host_ops(host);
> +
> + clk = devm_clk_get(&pdev->dev, "core");
> + if (IS_ERR(clk)) {
> + dev_err(&pdev->dev, "Failed to setup input clk.\n");
> + err = PTR_ERR(clk);
> + goto free_pltfm;
> + }
> + clk_prepare_enable(clk);
> + pltfm_host->clk = clk;
> +
> + /*
> + * Some SOCs require additional clock to
> + * manage AXI bus clock.
> + * It is optional.
> + */
> + axi_clk = devm_clk_get(&pdev->dev, "axi");
> + if (!IS_ERR(axi_clk)) {
> + clk_prepare_enable(axi_clk);
> + priv->axi_clk = axi_clk;
> + }
> +
> + err = xenon_probe_dt(pdev);
> + if (err)
> + goto err_clk;
> +
> + err = xenon_slot_probe(host);
> + if (err)
> + goto err_clk;
> +
> + err = sdhci_add_host(host);
> + if (err)
> + goto remove_slot;
> +
> + return 0;
> +
> +remove_slot:
> + xenon_slot_remove(host);
> +err_clk:
> + clk_disable_unprepare(pltfm_host->clk);
> + if (!IS_ERR(axi_clk))
> + clk_disable_unprepare(axi_clk);
> +free_pltfm:
> + sdhci_pltfm_free(pdev);
> + return err;
> +}
> +
> +static int sdhci_xenon_remove(struct platform_device *pdev)
> +{
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);
> +
> + xenon_slot_remove(host);
> +
> + sdhci_remove_host(host, dead);
> +
> + clk_disable_unprepare(pltfm_host->clk);
> + clk_disable_unprepare(priv->axi_clk);
> +
> + sdhci_pltfm_free(pdev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
> + { .compatible = "marvell,sdhci-xenon",},
> + { .compatible = "marvell,armada-3700-sdhci",},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
> +
> +static struct platform_driver sdhci_xenon_driver = {
> + .driver = {
> + .name = "sdhci-xenon",
> + .of_match_table = sdhci_xenon_dt_ids,
> + .pm = &sdhci_pltfm_pmops,
> + },
> + .probe = sdhci_xenon_probe,
> + .remove = sdhci_xenon_remove,
> +};
> +
> +module_platform_driver(sdhci_xenon_driver);
> +
> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
> +MODULE_AUTHOR("Hu Ziji <huziji@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> new file mode 100644
> index 000000000000..c2370493fbe8
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -0,0 +1,134 @@
> +/*
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author: Hu Ziji <huziji@xxxxxxxxxxx>
> + * Date: 2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + */
> +#ifndef SDHCI_XENON_H_
> +#define SDHCI_XENON_H_
> +
> +#include <linux/clk.h>
> +#include <linux/mmc/card.h>
> +#include <linux/of.h>
> +#include "sdhci.h"
> +
> +/* Register Offset of SD Host Controller SOCP self-defined register */
> +#define SDHC_SYS_CFG_INFO 0x0104
> +#define SLOT_TYPE_SDIO_SHIFT 24
> +#define SLOT_TYPE_EMMC_MASK 0xFF
> +#define SLOT_TYPE_EMMC_SHIFT 16
> +#define SLOT_TYPE_SD_SDIO_MMC_MASK 0xFF
> +#define SLOT_TYPE_SD_SDIO_MMC_SHIFT 8
> +#define NR_SUPPORTED_SLOT_MASK 0x7
> +
> +#define SDHC_SYS_OP_CTRL 0x0108
> +#define AUTO_CLKGATE_DISABLE_MASK BIT(20)
> +#define SDCLK_IDLEOFF_ENABLE_SHIFT 8
> +#define SLOT_ENABLE_SHIFT 0
> +
> +#define SDHC_SYS_EXT_OP_CTRL 0x010C
> +#define MASK_CMD_CONFLICT_ERROR BIT(8)
> +
> +#define SDHC_SLOT_OP_STATUS_CTRL 0x0128
> +#define DELAY_90_DEGREE_MASK_EMMC5 BIT(7)
> +#define DELAY_90_DEGREE_SHIFT_EMMC5 7
> +#define EMMC_5_0_PHY_FIXED_DELAY_MASK 0x7F
> +#define EMMC_PHY_FIXED_DELAY_MASK 0xFF
> +#define EMMC_PHY_FIXED_DELAY_WINDOW_MIN (EMMC_PHY_FIXED_DELAY_MASK >> 3)
> +#define SDH_PHY_FIXED_DELAY_MASK 0x1FF
> +#define SDH_PHY_FIXED_DELAY_WINDOW_MIN (SDH_PHY_FIXED_DELAY_MASK >> 4)
> +
> +#define TUN_CONSECUTIVE_TIMES_SHIFT 16
> +#define TUN_CONSECUTIVE_TIMES_MASK 0x7
> +#define TUN_CONSECUTIVE_TIMES 0x4
> +#define TUNING_STEP_SHIFT 12
> +#define TUNING_STEP_MASK 0xF
> +#define TUNING_STEP_DIVIDER BIT(6)
> +
> +#define FORCE_SEL_INVERSE_CLK_SHIFT 11
> +
> +#define SDHC_SLOT_EMMC_CTRL 0x0130
> +#define ENABLE_DATA_STROBE BIT(24)
> +#define SET_EMMC_RSTN BIT(16)
> +#define DISABLE_RD_DATA_CRC BIT(14)
> +#define DISABLE_CRC_STAT_TOKEN BIT(13)
> +#define EMMC_VCCQ_MASK 0x3
> +#define EMMC_VCCQ_1_8V 0x1
> +#define EMMC_VCCQ_3_3V 0x3
> +
> +#define SDHC_SLOT_RETUNING_REQ_CTRL 0x0144
> +/* retuning compatible */
> +#define RETUNING_COMPATIBLE 0x1
> +
> +#define SDHC_SLOT_EXT_PRESENT_STATE 0x014C
> +#define LOCK_STATE 0x1
> +
> +#define SDHC_SLOT_DLL_CUR_DLY_VAL 0x0150
> +
> +/* Tuning Parameter */
> +#define TMR_RETUN_NO_PRESENT 0xF
> +#define DEF_TUNING_COUNT 0x9
> +
> +#define MMC_TIMING_FAKE 0xFF
> +
> +#define DEFAULT_SDCLK_FREQ (400000)
> +
> +/* Xenon specific Mode Select value */
> +#define XENON_SDHCI_CTRL_HS200 0x5
> +#define XENON_SDHCI_CTRL_HS400 0x6
> +
> +struct sdhci_xenon_priv {
> + /*
> + * The bus_width, timing, and clock fields in below
> + * record the current setting of Xenon SDHC.
> + * Driver will call a Sampling Fixed Delay Adjustment
> + * if any setting is changed.
> + */
> + unsigned char bus_width;
> + unsigned char timing;
> + unsigned char tuning_count;
> + unsigned int clock;
> + struct clk *axi_clk;
> +
> + /* Slot idx */
> + u8 slot_idx;
> +
> + /*
> + * When initializing card, Xenon has to determine card type and
> + * adjust Sampling Fixed delay.
> + * However, at that time, card structure is not linked to mmc_host.
> + * Thus a card pointer is added here to provide
> + * the delay adjustment function with the card structure
> + * of the card during initialization
> + */
> + struct mmc_card *card_candidate;
> +};
> +
> +static inline int enable_xenon_internal_clk(struct sdhci_host *host)
> +{
> + u32 reg;
> + u8 timeout;
> +
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg |= SDHCI_CLOCK_INT_EN;
> + sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> + /* Wait max 20 ms */
> + timeout = 20;
> + while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> + & SDHCI_CLOCK_INT_STABLE)) {
> + if (timeout == 0) {
> + pr_err("%s: Internal clock never stabilised.\n",
> + mmc_hostname(host->mmc));
> + return -ETIMEDOUT;
> + }
> + timeout--;
> + mdelay(1);
> + }
> +
> + return 0;
> +}
> +#endif
>