Re: [PATCH 3/5] Input: add driver for Ilitek ili2139 touch IC

From: Dmitry Torokhov
Date: Tue Oct 11 2016 - 13:44:13 EST


Hi Icenowy,

On Tue, Oct 11, 2016 at 08:33:57AM +0800, Icenowy Zheng wrote:
> This driver adds support for Ilitek ili2139 touch IC, which is used in
> several Colorfly tablets (for example, Colorfly E708 Q1, which is an
> Allwinner A31s tablet with mainline kernel support).
>
> Theortically it may support more Ilitek touch ICs, however, only ili2139
> is used in any mainlined device.
>
> It supports device tree enumeration, with screen resolution and axis
> quirks configurable.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx>

Please extend ili210x.c instead of adding brand new driver, they look
very similar.

Thanks.

> ---
> drivers/input/touchscreen/Kconfig | 14 ++
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/ili2139.c | 320 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 335 insertions(+)
> create mode 100644 drivers/input/touchscreen/ili2139.c
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 5079813..bb4d9d2 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -348,6 +348,20 @@ config TOUCHSCREEN_ILI210X
> To compile this driver as a module, choose M here: the
> module will be called ili210x.
>
> +config TOUCHSCREEN_ILI2139
> + tristate "Ilitek ILI2139 based touchscreen"
> + depends on I2C
> + depends on OF
> + help
> + Say Y here if you have a ILI2139 based touchscreen
> + controller. Such kind of chipsets can be found in several
> + Colorfly tablets.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here; the
> + module will be called ili2139.
> +
> config TOUCHSCREEN_IPROC
> tristate "IPROC touch panel driver support"
> depends on ARCH_BCM_IPROC || COMPILE_TEST
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 81b8645..930b5e2 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o
> obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
> obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
> obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
> +obj-$(CONFIG_TOUCHSCREEN_ILI2139) += ili2139.o
> obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
> obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
> obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
> diff --git a/drivers/input/touchscreen/ili2139.c b/drivers/input/touchscreen/ili2139.c
> new file mode 100644
> index 0000000..65c2dea
> --- /dev/null
> +++ b/drivers/input/touchscreen/ili2139.c
> @@ -0,0 +1,320 @@
> +/* -------------------------------------------------------------------------
> + * Copyright (C) 2016, Icenowy Zheng <icenowy@xxxxxxxx>
> + *
> + * Derived from:
> + * ili210x.c
> + * Copyright (C) Olivier Sobrie <olivier@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + * -------------------------------------------------------------------------
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/input.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/delay.h>
> +#include <linux/workqueue.h>
> +
> +#define DEFAULT_POLL_PERIOD 20
> +
> +#define MAX_TOUCHES 10
> +#define COMPATIBLE_TOUCHES 2
> +
> +/* Touchscreen commands */
> +#define REG_TOUCHDATA 0x10
> +#define REG_TOUCHSUBDATA 0x11
> +#define REG_PANEL_INFO 0x20
> +#define REG_FIRMWARE_VERSION 0x40
> +#define REG_PROTO_VERSION 0x42
> +
> +#define SUBDATA_STATUS_TOUCH_POINT 0x80
> +#define SUBDATA_STATUS_RELEASE_POINT 0x00
> +
> +struct finger {
> + u8 x_low;
> + u8 x_high;
> + u8 y_low;
> + u8 y_high;
> +} __packed;
> +
> +struct touchdata {
> + u8 length;
> + struct finger finger[COMPATIBLE_TOUCHES];
> +} __packed;
> +
> +struct touch_subdata {
> + u8 status;
> + struct finger finger;
> +} __packed;
> +
> +struct panel_info {
> + struct finger finger_max;
> + u8 xchannel_num;
> + u8 ychannel_num;
> +} __packed;
> +
> +struct firmware_version {
> + u8 id;
> + u8 major;
> + u8 minor;
> +} __packed;
> +
> +struct ili2139 {
> + struct i2c_client *client;
> + struct input_dev *input;
> + unsigned int poll_period;
> + struct delayed_work dwork;
> + struct touchscreen_properties prop;
> + int slots[MAX_TOUCHES];
> + int ids[MAX_TOUCHES];
> + struct input_mt_pos pos[MAX_TOUCHES];
> +};
> +
> +static int ili2139_read_reg(struct i2c_client *client, u8 reg, void *buf,
> + size_t len)
> +{
> + struct i2c_msg msg[2] = {
> + {
> + .addr = client->addr,
> + .flags = 0,
> + .len = 1,
> + .buf = &reg,
> + },
> + {
> + .addr = client->addr,
> + .flags = I2C_M_RD,
> + .len = len,
> + .buf = buf,
> + }
> + };
> +
> + if (i2c_transfer(client->adapter, msg, 2) != 2) {
> + dev_err(&client->dev, "i2c transfer failed\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +static void ili2139_work(struct work_struct *work)
> +{
> + int id;
> + struct ili2139 *priv = container_of(work, struct ili2139,
> + dwork.work);
> + struct i2c_client *client = priv->client;
> + struct touchdata touchdata;
> + struct touch_subdata subdata;
> + int error;
> +
> + error = ili2139_read_reg(client, REG_TOUCHDATA,
> + &touchdata, sizeof(touchdata));
> + if (error) {
> + dev_err(&client->dev,
> + "Unable to get touchdata, err = %d\n", error);
> + return;
> + }
> +
> + for (id = 0; id < touchdata.length; id++) {
> + error = ili2139_read_reg(client, REG_TOUCHSUBDATA, &subdata,
> + sizeof(subdata));
> + if (error) {
> + dev_err(&client->dev,
> + "Unable to get touch subdata, err = %d\n",
> + error);
> + return;
> + }
> +
> + priv->ids[id] = subdata.status & 0x3F;
> +
> + /* The sequence changed in the v2 subdata protocol. */
> + touchscreen_set_mt_pos(&priv->pos[id], &priv->prop,
> + (subdata.finger.x_high | (subdata.finger.x_low << 8)),
> + (subdata.finger.y_high | (subdata.finger.y_low << 8)));
> + }
> +
> + input_mt_assign_slots(priv->input, priv->slots, priv->pos,
> + touchdata.length, 0);
> +
> + for (id = 0; id < touchdata.length; id++) {
> + input_mt_slot(priv->input, priv->slots[id]);
> + input_mt_report_slot_state(priv->input, MT_TOOL_FINGER,
> + subdata.status &
> + SUBDATA_STATUS_TOUCH_POINT);
> + input_report_abs(priv->input, ABS_MT_POSITION_X,
> + priv->pos[id].x);
> + input_report_abs(priv->input, ABS_MT_POSITION_Y,
> + priv->pos[id].y);
> + }
> +
> + input_mt_sync_frame(priv->input);
> + input_sync(priv->input);
> +
> + schedule_delayed_work(&priv->dwork,
> + msecs_to_jiffies(priv->poll_period));
> +}
> +
> +static irqreturn_t ili2139_irq(int irq, void *irq_data)
> +{
> + struct ili2139 *priv = irq_data;
> +
> + schedule_delayed_work(&priv->dwork, 0);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int ili2139_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct ili2139 *priv;
> + struct input_dev *input;
> + struct panel_info panel;
> + struct firmware_version firmware;
> + int xmax, ymax;
> + int error;
> +
> + dev_dbg(dev, "Probing for ILI2139 I2C Touschreen driver");
> +
> + if (client->irq <= 0) {
> + dev_err(dev, "No IRQ!\n");
> + return -ENODEV;
> + }
> +
> + /* Get firmware version */
> + error = ili2139_read_reg(client, REG_FIRMWARE_VERSION,
> + &firmware, sizeof(firmware));
> + if (error) {
> + dev_err(dev, "Failed to get firmware version, err: %d\n",
> + error);
> + return error;
> + }
> +
> + /* get panel info */
> + error = ili2139_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
> + if (error) {
> + dev_err(dev, "Failed to get panel information, err: %d\n",
> + error);
> + return error;
> + }
> +
> + xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8);
> + ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8);
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + input = devm_input_allocate_device(dev);
> + if (!priv || !input)
> + return -ENOMEM;
> +
> + priv->client = client;
> + priv->input = input;
> + priv->poll_period = DEFAULT_POLL_PERIOD;
> + INIT_DELAYED_WORK(&priv->dwork, ili2139_work);
> +
> + /* Setup input device */
> + input->name = "ILI2139 Touchscreen";
> + input->id.bustype = BUS_I2C;
> + input->dev.parent = dev;
> +
> + __set_bit(EV_SYN, input->evbit);
> + __set_bit(EV_KEY, input->evbit);
> + __set_bit(EV_ABS, input->evbit);
> +
> + /* Multi touch */
> + input_mt_init_slots(input, MAX_TOUCHES, INPUT_MT_DIRECT |
> + INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
> + input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
> + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
> +
> + touchscreen_parse_properties(input, true, &priv->prop);
> +
> + input_set_drvdata(input, priv);
> + i2c_set_clientdata(client, priv);
> +
> + error = devm_request_irq(dev, client->irq, ili2139_irq,
> + IRQF_TRIGGER_FALLING, client->name, priv);
> + if (error) {
> + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
> + error);
> + return error;
> + }
> +
> + error = input_register_device(priv->input);
> + if (error) {
> + dev_err(dev, "Cannot register input device, err: %d\n", error);
> + return error;
> + }
> +
> + device_init_wakeup(&client->dev, 1);
> +
> + dev_dbg(dev,
> + "ILI2139 initialized (IRQ: %d), firmware version %d.%d.%d",
> + client->irq, firmware.id, firmware.major, firmware.minor);
> +
> + return 0;
> +}
> +
> +static int ili2139_i2c_remove(struct i2c_client *client)
> +{
> + struct ili2139 *priv = i2c_get_clientdata(client);
> +
> + cancel_delayed_work_sync(&priv->dwork);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused ili2139_i2c_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> +
> + if (device_may_wakeup(&client->dev))
> + enable_irq_wake(client->irq);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused ili2139_i2c_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> +
> + if (device_may_wakeup(&client->dev))
> + disable_irq_wake(client->irq);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ili2139_i2c_pm,
> + ili2139_i2c_suspend, ili2139_i2c_resume);
> +
> +static const struct i2c_device_id ili2139_i2c_id[] = {
> + { "ili2139", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ili2139_i2c_id);
> +
> +static struct i2c_driver ili2139_ts_driver = {
> + .driver = {
> + .name = "ili2139_i2c",
> + .pm = &ili2139_i2c_pm,
> + },
> + .id_table = ili2139_i2c_id,
> + .probe = ili2139_i2c_probe,
> + .remove = ili2139_i2c_remove,
> +};
> +
> +module_i2c_driver(ili2139_ts_driver);
> +
> +MODULE_AUTHOR("Olivier Sobrie <olivier@xxxxxxxxx>");
> +MODULE_DESCRIPTION("ILI2139 I2C Touchscreen Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.10.1
>

--
Dmitry