[DEBUG 01/10] dt-bindings: Add doc for ibm,hotplug-aperture

[Anshuman Khandual]

From: Reza Arbab <arbab@xxxxxxxxxxxxxxxxxx>

Signed-off-by: Reza Arbab <arbab@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Anshuman Khandual <khandual@xxxxxxxxxxxxxxxxxx>
---
 .../bindings/powerpc/opal/hotplug-aperture.txt     | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt

diff --git a/Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt b/Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt
new file mode 100644
index 0000000..04dde03
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt
@@ -0,0 +1,26 @@
+Designated hotplug memory
+-------------------------
+
+This binding describes a region of hotplug memory which is not present
+at boot, allowing its eventual NUMA associativity to be prespecified.
+
+Required properties:
+
+- compatible
+	"ibm,hotplug-aperture"
+
+- reg
+	base address and size of the region (standard definition)
+
+- ibm,associativity
+	NUMA associativity (standard definition)
+
+Example:
+
+A 2 GiB aperture at 0x100000000, to be part of nid 3 when hotplugged:
+
+	hotplug-memory@100000000 {
+		compatible = "ibm,hotplug-aperture";
+		reg = <0x0 0x100000000 0x0 0x80000000>;
+		ibm,associativity = <0x4 0x0 0x0 0x0 0x3>;
+	};
-- 
2.1.0