Re: [PATCH v1] Input: synaptics-rmi4 - allow number of PDT pages to be specified

[Dmitry Torokhov]

On Mon, Oct 24, 2016 at 11:55:22PM +0100, Nick Dyer wrote:
> We have encountered some RMI4 firmwares where there are blank pages in between
> PDT pages which contain functions. Add a device tree property which can be set
> to force reading the first N pages.

Cann we get updated firmware instead? This seems like violation of RMI
protocol. Or, if it is allowed by the protocol, can we avoid DT
parameter and keep scanning until the end?

Thanks.

> 
> Signed-off-by: Nick Dyer <nick@xxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt |  2 ++
>  drivers/input/rmi4/rmi_driver.c                          | 16 ++++++++++++++--
>  include/linux/rmi.h                                      |  1 +
>  3 files changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> index ec908b9..a611374 100644
> --- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> @@ -25,6 +25,8 @@ See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>  - syna,startup-delay-ms: The number of milliseconds to wait after powering on
>  			 the device.
>  
> +- syna,pdt-scan-pages: Scan the first N PDT pages, ignoring blank pages.
> +
>  - vdd-supply: VDD power supply.
>  See ../regulator/regulator.txt
>  
> diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
> index 4a88312..8f94160 100644
> --- a/drivers/input/rmi4/rmi_driver.c
> +++ b/drivers/input/rmi4/rmi_driver.c
> @@ -428,6 +428,8 @@ static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
>  					     const struct pdt_entry *entry))
>  {
>  	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
> +	const struct rmi_device_platform_data *pdata =
> +		rmi_get_platform_data(rmi_dev);
>  	struct pdt_entry pdt_entry;
>  	u16 page_start = RMI4_PAGE_SIZE * page;
>  	u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
> @@ -449,8 +451,13 @@ static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
>  			return retval;
>  	}
>  
> -	return (data->f01_bootloader_mode || addr == pdt_start) ?
> -					RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
> +	if (data->f01_bootloader_mode)
> +		return RMI_SCAN_DONE;
> +
> +	if (page >= pdata->pdt_scan_pages && addr == pdt_start)
> +		return RMI_SCAN_DONE;
> +
> +	return RMI_SCAN_CONTINUE;
>  }
>  
>  static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
> @@ -832,6 +839,11 @@ static int rmi_driver_of_probe(struct device *dev,
>  	if (retval)
>  		return retval;
>  
> +	retval = rmi_of_property_read_u32(dev, &pdata->pdt_scan_pages,
> +					"syna,pdt-scan-pages", 1);
> +	if (retval)
> +		return retval;
> +
>  	return 0;
>  }
>  #else
> diff --git a/include/linux/rmi.h b/include/linux/rmi.h
> index e0aca14..2c4570d 100644
> --- a/include/linux/rmi.h
> +++ b/include/linux/rmi.h
> @@ -207,6 +207,7 @@ struct rmi_device_platform_data_spi {
>   */
>  struct rmi_device_platform_data {
>  	int reset_delay_ms;
> +	u32 pdt_scan_pages;
>  
>  	struct rmi_device_platform_data_spi spi_data;
>  
> -- 
> 2.7.4
> 

-- 
Dmitry