Re: [PATCH v3 8/9] mtd: spi-nor: add support to Macronix mx66l1g45g

[Marek Vasut]

On 10/25/2016 11:39 AM, Cyrille Pitchen wrote:
> Hi Marek,

Hi,

> Le 25/10/2016 Ã 00:16, Marek Vasut a Ãcrit :
>> On 10/24/2016 06:34 PM, Cyrille Pitchen wrote:
>>> This patch adds an entry in the spi_nor_ids[] table to add support
>>> to the Macronix mx66l1g45g.
>>>
>>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
>>> ---
>>>  drivers/mtd/spi-nor/spi-nor.c | 1 +
>>>  1 file changed, 1 insertion(+)
>>>
>>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>>> index db4874d4af79..eb21d3d4e4e6 100644
>>> --- a/drivers/mtd/spi-nor/spi-nor.c
>>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>>> @@ -937,6 +937,7 @@ static const struct flash_info spi_nor_ids[] = {
>>>  	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
>>>  	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
>>>  	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
>>> +	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
>>>  	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
>>>  
>>>  	/* Micron */
>>>
>> This should be submitted separately as it could be applied right away.
>>
> 
> I totally agree with you. Indeed I have only provided patch 8 and 9 because
> I refer to these memories in the cover letter and to "prove" that I did really
> test every memory of the list. If everyone trust me about the test I do, I
> will remove patch 8 and 9 in the next version.

I think 9 needs to stay or be separated somehow differently from the
series, since it also adds some code to support the flash. Otherwise,
go for submitting them separately.

> By the way, I need to add a remark about the Spansion S25FL127S. The sample I
> have is compliant with neither the JESD216B specification nor the Cypress
> datasheet. More precisely, the Cypress datasheet claims that the S25FL127S
> is compliant with the JESD216B (minor 6) so its Basic Flash Parameter Table
> (BFPT) should contain 16 DWORDS.
> However my sample claims to be JESD216B compliant (I read minor 6) and that
> the BFPT has 16 DWORDS but the 7 last DWORDS of this table are all 0xFFFFFFFF.
> Only the first 9 DWORDS are properly filled, the DWORDS described in JESD216
> (minor 0).
> Also my sample pretend to provide the optional 4-byte address instruction set
> (4BAIS) table but the data I read are once again all 0xFFFFFFFF.
> 
> It's surprising that this 128Mbit memory supports the 4-byte address
> instruction set but the 4-byte Fast Read actually seems to be supported.

They probably use the same HDL design for the controller block in many
memories, they just burn in different ID/SFDP/geometry tables for each
chip they roll out from the factory based on how well the memory array
works.

> Consequently, Fast Read operations work but Sector Erase cannot due to the
> 0xFF op code read from the 4BAIS table. I think I just have a broken sample so
> if anyone can test with another sample and confirm that the SFDP series also
> work with Spansion S25FL127S it would be nice! :)

I don't have one, sorry.

-- 
Best regards,
Marek Vasut