[PATCH v2 07/11] mpt3sas: Increased/Additional MSIX support for SAS35 devices.

[Suganath Prabu S]

For SAS35 devices MSIX vectors are inceased to 128 from 96. To support this
Reply post host index register count is increased to 16. Also variable
msix96_vector is replaced with combined_reply_queue and variable
combined_reply_index_count is added to set different values for SAS3 and
SAS35 devices.

Signed-off-by: Chaitra P B <chaitra.basappa@xxxxxxxxxxxx>
Signed-off-by: Sathya Prakash <sathya.prakash@xxxxxxxxxxxx>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>
Reviewed-by: Tomas Henzl <thenzl@xxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c  | 14 +++++++-------
 drivers/scsi/mpt3sas/mpt3sas_base.h  |  8 +++++---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 11 +++++++++--
 3 files changed, 21 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 9ad7f7c..43cdc02 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1078,7 +1078,7 @@ _base_interrupt(int irq, void *bus_id)
 	 * new reply host index value in ReplyPostIndex Field and msix_index
 	 * value in MSIxIndex field.
 	 */
-	if (ioc->msix96_vector)
+	if (ioc->combined_reply_queue)
 		writel(reply_q->reply_post_host_index | ((msix_index  & 7) <<
 			MPI2_RPHI_MSIX_INDEX_SHIFT),
 			ioc->replyPostRegisterIndex[msix_index/8]);
@@ -2052,7 +2052,7 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
 	_base_free_irq(ioc);
 	_base_disable_msix(ioc);
 
-	if (ioc->msix96_vector) {
+	if (ioc->combined_reply_queue) {
 		kfree(ioc->replyPostRegisterIndex);
 		ioc->replyPostRegisterIndex = NULL;
 	}
@@ -2162,7 +2162,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 	/* Use the Combined reply queue feature only for SAS3 C0 & higher
 	 * revision HBAs and also only when reply queue count is greater than 8
 	 */
-	if (ioc->msix96_vector && ioc->reply_queue_count > 8) {
+	if (ioc->combined_reply_queue && ioc->reply_queue_count > 8) {
 		/* Determine the Supplemental Reply Post Host Index Registers
 		 * Addresse. Supplemental Reply Post Host Index Registers
 		 * starts at offset MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET and
@@ -2170,7 +2170,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 		 * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET from previous one.
 		 */
 		ioc->replyPostRegisterIndex = kcalloc(
-		     MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT,
+		     ioc->combined_reply_index_count,
 		     sizeof(resource_size_t *), GFP_KERNEL);
 		if (!ioc->replyPostRegisterIndex) {
 			dfailprintk(ioc, printk(MPT3SAS_FMT
@@ -2180,14 +2180,14 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 			goto out_fail;
 		}
 
-		for (i = 0; i < MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT; i++) {
+		for (i = 0; i < ioc->combined_reply_index_count; i++) {
 			ioc->replyPostRegisterIndex[i] = (resource_size_t *)
 			     ((u8 *)&ioc->chip->Doorbell +
 			     MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
 			     (i * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET));
 		}
 	} else
-		ioc->msix96_vector = 0;
+		ioc->combined_reply_queue = 0;
 
 	if (ioc->is_warpdrive) {
 		ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
@@ -5140,7 +5140,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
 
 	/* initialize reply post host index */
 	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
-		if (ioc->msix96_vector)
+		if (ioc->combined_reply_queue)
 			writel((reply_q->msix_index & 7)<<
 			   MPI2_RPHI_MSIX_INDEX_SHIFT,
 			   ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 3d75c57..acb4106 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -300,8 +300,9 @@
  * There are twelve Supplemental Reply Post Host Index Registers
  * and each register is at offset 0x10 bytes from the previous one.
  */
-#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT 12
-#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10)
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3	12
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35	16
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET	(0x10)
 
 /* OEM Identifiers */
 #define MFG10_OEM_ID_INVALID                   (0x00000000)
@@ -1158,7 +1159,8 @@ struct MPT3SAS_ADAPTER {
 	u8		reply_queue_count;
 	struct list_head reply_queue_list;
 
-	u8		msix96_vector;
+	u8		combined_reply_queue;
+	u8		combined_reply_index_count;
 	/* reply post register index */
 	resource_size_t	**replyPostRegisterIndex;
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 521849d..a1c541d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -8748,8 +8748,15 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		}
 		if ((ioc->hba_mpi_version_belonged == MPI25_VERSION &&
 			pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION) ||
-			(ioc->hba_mpi_version_belonged == MPI26_VERSION))
-			ioc->msix96_vector = 1;
+			(ioc->hba_mpi_version_belonged == MPI26_VERSION)) {
+			ioc->combined_reply_queue = 1;
+			if (ioc->is_gen35_ioc)
+				ioc->combined_reply_index_count =
+				 MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35;
+			else
+				ioc->combined_reply_index_count =
+				 MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3;
+		}
 		break;
 	default:
 		return -ENODEV;
-- 
2.4.3