[PATCH 4.4 086/112] hpsa: correct skipping masked peripherals
From: Greg Kroah-Hartman
Date: Wed Oct 26 2016 - 08:34:57 EST
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Don Brace <don.brace@xxxxxxxxxxxxx>
commit 64ce60cab24603ac0fcd59c9fbc3be78f4c4d229 upstream.
The SA controller spins down RAID drive spares.
A REGNEWD event causes an inquiry to be sent to all physical
drives. This causes the SA controller to spin up the spare.
The controller suspends all I/O to a logical volume until
the spare is spun up. The spin-up can take over 50 seconds.
This can result in one or both of the following:
- SML sends down aborts and resets to the logical volume
and can cause the logical volume to be off-lined.
- a negative impact on the logical volume's I/O performance
each time a REGNEWD is triggered.
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Juerg Haefliger <juerg.haefliger@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/hpsa.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 74 insertions(+), 4 deletions(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3930,6 +3930,70 @@ static int hpsa_set_local_logical_count(
return rc;
}
+static bool hpsa_is_disk_spare(struct ctlr_info *h, u8 *lunaddrbytes)
+{
+ struct bmic_identify_physical_device *id_phys;
+ bool is_spare = false;
+ int rc;
+
+ id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
+ if (!id_phys)
+ return false;
+
+ rc = hpsa_bmic_id_physical_device(h,
+ lunaddrbytes,
+ GET_BMIC_DRIVE_NUMBER(lunaddrbytes),
+ id_phys, sizeof(*id_phys));
+ if (rc == 0)
+ is_spare = (id_phys->more_flags >> 6) & 0x01;
+
+ kfree(id_phys);
+ return is_spare;
+}
+
+#define RPL_DEV_FLAG_NON_DISK 0x1
+#define RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED 0x2
+#define RPL_DEV_FLAG_UNCONFIG_DISK 0x4
+
+#define BMIC_DEVICE_TYPE_ENCLOSURE 6
+
+static bool hpsa_skip_device(struct ctlr_info *h, u8 *lunaddrbytes,
+ struct ext_report_lun_entry *rle)
+{
+ u8 device_flags;
+ u8 device_type;
+
+ if (!MASKED_DEVICE(lunaddrbytes))
+ return false;
+
+ device_flags = rle->device_flags;
+ device_type = rle->device_type;
+
+ if (device_flags & RPL_DEV_FLAG_NON_DISK) {
+ if (device_type == BMIC_DEVICE_TYPE_ENCLOSURE)
+ return false;
+ return true;
+ }
+
+ if (!(device_flags & RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED))
+ return false;
+
+ if (device_flags & RPL_DEV_FLAG_UNCONFIG_DISK)
+ return false;
+
+ /*
+ * Spares may be spun down, we do not want to
+ * do an Inquiry to a RAID set spare drive as
+ * that would have them spun up, that is a
+ * performance hit because I/O to the RAID device
+ * stops while the spin up occurs which can take
+ * over 50 seconds.
+ */
+ if (hpsa_is_disk_spare(h, lunaddrbytes))
+ return true;
+
+ return false;
+}
static void hpsa_update_scsi_devices(struct ctlr_info *h)
{
@@ -4023,6 +4087,7 @@ static void hpsa_update_scsi_devices(str
u8 *lunaddrbytes, is_OBDR = 0;
int rc = 0;
int phys_dev_index = i - (raid_ctlr_position == 0);
+ bool skip_device = false;
physical_device = i < nphysicals + (raid_ctlr_position == 0);
@@ -4030,10 +4095,15 @@ static void hpsa_update_scsi_devices(str
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
i, nphysicals, nlogicals, physdev_list, logdev_list);
- /* skip masked non-disk devices */
- if (MASKED_DEVICE(lunaddrbytes) && physical_device &&
- (physdev_list->LUN[phys_dev_index].device_flags & 0x01))
- continue;
+ /*
+ * Skip over some devices such as a spare.
+ */
+ if (!tmpdevice->external && physical_device) {
+ skip_device = hpsa_skip_device(h, lunaddrbytes,
+ &physdev_list->LUN[phys_dev_index]);
+ if (skip_device)
+ continue;
+ }
/* Get device type, vendor, model, device id */
rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,