Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver

[Linus Walleij]

On Thu, Oct 27, 2016 at 1:32 AM, Michael Scott <michael.scott@xxxxxxxxxx> wrote:

> Initial pinctrl driver for QCOM msm8994 platforms.
>
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@xxxxxxxxxx>, let's put
> a proper pinctrl driver in place.
>
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART.  Beyond the first few pins the rest are different enough to justify
> it's own driver.
>
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
>
> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>   by BjÃrn Andersson <bjorn.andersson@xxxxxxxxxx>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>   Joonwoo Park <joonwoop@xxxxxxxxxxxxxx> and then modified for msm8994 content
>
> Signed-off-by: Michael Scott <michael.scott@xxxxxxxxxx>
> ---
>
> V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups

Looks fine to me, just like the other Qcom drivers.

I just want BjÃrn Andersson's ACK before merging, BjÃrn?

Yours,
Linus Walleij