Re: [PATCH 01/10] staging: iio: tsl2583: add of_match table for device tree support

[Jonathan Cameron]

On 28/10/16 11:00, Brian Masney wrote:
> Add device tree support for the tsl2583 IIO driver with no custom
> properties.
> 
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Trivial enough that I feel I can take this without an explicit devicetree
ack.  Of course one is always welcome if anyone gets a chance to look at it.
I won't have it exposed in a non rebasing tree until perhaps the second half
of the week.
> ---
>  .../devicetree/bindings/iio/light/tsl2583.txt      | 26 ++++++++++++++++++++++
>  drivers/staging/iio/light/tsl2583.c                | 13 +++++++++++
>  2 files changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
> new file mode 100644
> index 0000000..8e2066c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
> @@ -0,0 +1,26 @@
> +* TAOS TSL 2580/2581/2583 ALS sensor
> +
> +Required properties:
> +
> +  - compatible: Should be one of
> +		"amstaos,tsl2580"
> +		"amstaos,tsl2581"
> +		"amstaos,tsl2583"
> +  - reg: the I2C address of the device
> +
> +Optional properties:
> +
> +  - interrupt-parent: should be the phandle for the interrupt controller
> +  - interrupts: the sole interrupt generated by the device
> +
> +  Refer to interrupt-controller/interrupts.txt for generic interrupt client
> +  node bindings.
> +
> +  - vcc-supply: phandle to the regulator that provides power to the sensor.
> +
> +Example:
> +
> +tsl2581@29 {
> +	compatible = "amstaos,tsl2581";
> +	reg = <0x29>;
> +};
> diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
> index 08f1583..fd4b6ef 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -947,11 +947,24 @@ static struct i2c_device_id taos_idtable[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, taos_idtable);
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id taos2583_of_match[] = {
> +	{ .compatible = "amstaos,tsl2580", },
> +	{ .compatible = "amstaos,tsl2581", },
> +	{ .compatible = "amstaos,tsl2583", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, taos2583_of_match);
> +#else
> +#define taos2583_of_match NULL
> +#endif
> +
>  /* Driver definition */
>  static struct i2c_driver taos_driver = {
>  	.driver = {
>  		.name = "tsl2583",
>  		.pm = TAOS_PM_OPS,
> +		.of_match_table = taos2583_of_match,
>  	},
>  	.id_table = taos_idtable,
>  	.probe = taos_probe,
>