[PATCH 1/2] Documentation: synopsys-dw-mshc: add binding for reset-names

[Jaehoon Chung]

Add reset-names property for binding dw-mmc controller.
It might be used together with "reset" property.
-  Note: It must be "reset" as name.

Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller")

Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 4e00e85..bfa461a 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -43,6 +43,9 @@ Optional properties:
   reset signal present internally in some host controller IC designs.
   See Documentation/devicetree/bindings/reset/reset.txt for details.
 
+* reset-names: request name for using "resets" property. Must be "reset".
+	(It will be used together with "resets" property.)
+
 * clocks: from common clock binding: handle to biu and ciu clocks for the
   bus interface unit clock and the card interface unit clock.
 
@@ -103,6 +106,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		resets = <&rst 20>;
+		reset-names = "reset";
 	};
 
 [board specific internal DMA resources]
-- 
2.10.1