[PATCH 7/10] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC
From: Gregory CLEMENT
Date: Mon Oct 31 2016 - 07:11:05 EST
From: Ziji Hu <huziji@xxxxxxxxxxx>
Marvell Xenon eMMC/SD/SDIO Host Controller contains PHY.
Three types of PHYs are supported.
Add support to multiple types of PHYs init and configuration.
Add register definitions of PHYs.
Signed-off-by: Hu Ziji <huziji@xxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
MAINTAINERS | 2 +-
drivers/mmc/host/Makefile | 2 +-
drivers/mmc/host/sdhci-xenon-phy.c | 1181 +++++++++++++++++++++++++++++-
drivers/mmc/host/sdhci-xenon-phy.h | 157 ++++-
drivers/mmc/host/sdhci-xenon.c | 4 +-
drivers/mmc/host/sdhci-xenon.h | 17 +-
6 files changed, 1361 insertions(+), 2 deletions(-)
create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
create mode 100644 drivers/mmc/host/sdhci-xenon-phy.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d92f4175574b..bb33286aeb48 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7608,7 +7608,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
M: Ziji Hu <huziji@xxxxxxxxxxx>
L: linux-mmc@xxxxxxxxxxxxxxx
S: Supported
-F: drivers/mmc/host/sdhci-xenon.*
+F: drivers/mmc/host/sdhci-xenon*
F: Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
MATROX FRAMEBUFFER DRIVER
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 75eaf743486c..4f2854556ff7 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -82,4 +82,4 @@ ifeq ($(CONFIG_CB710_DEBUG),y)
endif
obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o
-sdhci-xenon-driver-y += sdhci-xenon.o
+sdhci-xenon-driver-y += sdhci-xenon.o sdhci-xenon-phy.o
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
new file mode 100644
index 000000000000..af32f8842e0b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -0,0 +1,1181 @@
+/*
+ * PHY support for Xenon SDHC
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author: Hu Ziji <huziji@xxxxxxxxxxx>
+ * Date: 2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+static const char * const phy_types[] = {
+ "sdh phy",
+ "emmc 5.0 phy",
+ "emmc 5.1 phy"
+};
+
+enum phy_type_enum {
+ SDH_PHY,
+ EMMC_5_0_PHY,
+ EMMC_5_1_PHY,
+ NR_PHY_TYPES
+};
+
+struct soc_pad_ctrl_table {
+ const char *soc;
+ void (*set_soc_pad)(struct sdhci_host *host,
+ unsigned char signal_voltage);
+};
+
+struct soc_pad_ctrl {
+ /* Register address of SOC PHY PAD ctrl */
+ void __iomem *reg;
+ /* SOC PHY PAD ctrl type */
+ enum soc_pad_ctrl_type pad_type;
+ /* SOC specific operation to set SOC PHY PAD */
+ void (*set_soc_pad)(struct sdhci_host *host,
+ unsigned char signal_voltage);
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
+ .timing_adj = EMMC_5_0_PHY_TIMING_ADJUST,
+ .func_ctrl = EMMC_5_0_PHY_FUNC_CONTROL,
+ .pad_ctrl = EMMC_5_0_PHY_PAD_CONTROL,
+ .pad_ctrl2 = EMMC_5_0_PHY_PAD_CONTROL2,
+ .dll_ctrl = EMMC_5_0_PHY_DLL_CONTROL,
+ .logic_timing_adj = EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
+ .delay_mask = EMMC_5_0_PHY_FIXED_DELAY_MASK,
+ .dll_update = DLL_UPDATE_STROBE_5_0,
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = {
+ .timing_adj = EMMC_PHY_TIMING_ADJUST,
+ .func_ctrl = EMMC_PHY_FUNC_CONTROL,
+ .pad_ctrl = EMMC_PHY_PAD_CONTROL,
+ .pad_ctrl2 = EMMC_PHY_PAD_CONTROL2,
+ .dll_ctrl = EMMC_PHY_DLL_CONTROL,
+ .logic_timing_adj = EMMC_PHY_LOGIC_TIMING_ADJUST,
+ .delay_mask = EMMC_PHY_FIXED_DELAY_MASK,
+ .dll_update = DLL_UPDATE,
+};
+
+static int xenon_delay_adj_test(struct mmc_card *card);
+
+/*
+ * eMMC PHY configuration and operations
+ */
+struct emmc_phy_params {
+ bool slow_mode;
+
+ u8 znr;
+ u8 zpr;
+
+ /* Nr of consecutive Sampling Points of a Valid Sampling Window */
+ u8 nr_tun_times;
+ /* Divider for calculating Tuning Step */
+ u8 tun_step_divider;
+
+ struct soc_pad_ctrl pad_ctrl;
+};
+
+static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card);
+static int xenon_emmc_phy_fix_sampl_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card);
+static void xenon_emmc_phy_set(struct sdhci_host *host,
+ unsigned char timing);
+static void xenon_emmc_set_soc_pad(struct sdhci_host *host,
+ unsigned char signal_voltage);
+
+static const struct xenon_phy_ops emmc_phy_ops = {
+ .strobe_delay_adj = xenon_emmc_phy_strobe_delay_adj,
+ .fix_sampl_delay_adj = xenon_emmc_phy_fix_sampl_delay_adj,
+ .phy_set = xenon_emmc_phy_set,
+ .set_soc_pad = xenon_emmc_set_soc_pad,
+};
+
+static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
+{
+ struct emmc_phy_params *params;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ priv->phy_params = params;
+ priv->phy_ops = &emmc_phy_ops;
+ if (priv->phy_type == EMMC_5_0_PHY)
+ priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
+ else
+ priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
+
+ return 0;
+}
+
+static int xenon_emmc_phy_init(struct sdhci_host *host)
+{
+ u32 reg;
+ u32 wait, clock;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg |= PHY_INITIALIZAION;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+
+ /* Add duration of FC_SYNC_RST */
+ wait = ((reg >> FC_SYNC_RST_DURATION_SHIFT) &
+ FC_SYNC_RST_DURATION_MASK);
+ /* Add interval between FC_SYNC_EN and FC_SYNC_RST */
+ wait += ((reg >> FC_SYNC_RST_EN_DURATION_SHIFT) &
+ FC_SYNC_RST_EN_DURATION_MASK);
+ /* Add duration of asserting FC_SYNC_EN */
+ wait += ((reg >> FC_SYNC_EN_DURATION_SHIFT) &
+ FC_SYNC_EN_DURATION_MASK);
+ /* Add duration of waiting for PHY */
+ wait += ((reg >> WAIT_CYCLE_BEFORE_USING_SHIFT) &
+ WAIT_CYCLE_BEFORE_USING_MASK);
+ /* 4 addtional bus clock and 4 AXI bus clock are required */
+ wait += 8;
+ wait <<= 20;
+
+ clock = host->clock;
+ if (!clock)
+ /* Use the possibly slowest bus frequency value */
+ clock = LOWEST_SDCLK_FREQ;
+ /* get the wait time */
+ wait /= clock;
+ wait++;
+ /* wait for host eMMC PHY init completes */
+ udelay(wait);
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg &= PHY_INITIALIZAION;
+ if (reg) {
+ dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
+ wait);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+#define ARMADA_3700_SOC_PAD_1_8V 0x1
+#define ARMADA_3700_SOC_PAD_3_3V 0x0
+
+static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host,
+ unsigned char signal_voltage)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct emmc_phy_params *params = priv->phy_params;
+
+ if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) {
+ writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+ } else if (params->pad_ctrl.pad_type == SOC_PAD_SD) {
+ if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+ writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+ else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+ writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg);
+ }
+}
+
+static void xenon_emmc_set_soc_pad(struct sdhci_host *host,
+ unsigned char signal_voltage)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct emmc_phy_params *params = priv->phy_params;
+
+ if (!params->pad_ctrl.reg)
+ return;
+
+ if (params->pad_ctrl.set_soc_pad)
+ params->pad_ctrl.set_soc_pad(host, signal_voltage);
+}
+
+static int emmc_phy_set_fix_sampl_delay(struct sdhci_host *host,
+ unsigned int delay,
+ bool invert,
+ bool delay_90_degree)
+{
+ u32 reg;
+ unsigned long flags;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ int ret = 0;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Setup Sampling fix delay */
+ reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
+ reg &= ~phy_regs->delay_mask;
+ reg |= delay & phy_regs->delay_mask;
+ sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ /* set 90 degree phase if necessary */
+ reg &= ~DELAY_90_DEGREE_MASK_EMMC5;
+ reg |= (delay_90_degree << DELAY_90_DEGREE_SHIFT_EMMC5);
+ sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+ }
+
+ /* Disable SDCLK */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
+ sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+ udelay(200);
+
+ if (priv->phy_type == EMMC_5_1_PHY) {
+ /* set 90 degree phase if necessary */
+ reg = sdhci_readl(host, EMMC_PHY_FUNC_CONTROL);
+ reg &= ~ASYNC_DDRMODE_MASK;
+ reg |= (delay_90_degree << ASYNC_DDRMODE_SHIFT);
+ sdhci_writel(host, reg, EMMC_PHY_FUNC_CONTROL);
+ }
+
+ /* Setup Inversion of Sampling edge */
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg &= ~SAMPL_INV_QSP_PHASE_SELECT;
+ reg |= (invert << SAMPL_INV_QSP_PHASE_SELECT_SHIFT);
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+
+ /* Enable SD internal clock */
+ ret = enable_xenon_internal_clk(host);
+ if (ret)
+ goto out;
+
+ /* Enable SDCLK */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+ udelay(200);
+
+ /*
+ * Has to re-initialize eMMC PHY here to active PHY
+ * because later get status cmd will be issued.
+ */
+ ret = xenon_emmc_phy_init(host);
+
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+}
+
+static int emmc_phy_do_fix_sampl_delay(struct sdhci_host *host,
+ struct mmc_card *card,
+ unsigned int delay,
+ bool invert, bool quarter)
+{
+ int ret;
+
+ emmc_phy_set_fix_sampl_delay(host, delay, invert, quarter);
+
+ ret = xenon_delay_adj_test(card);
+ if (ret) {
+ dev_dbg(mmc_dev(host->mmc),
+ "fail when sampling fix delay = %d, phase = %d degree\n",
+ delay, invert * 180 + quarter * 90);
+ return -1;
+ }
+ return 0;
+}
+
+static int xenon_emmc_phy_fix_sampl_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card)
+{
+ enum sampl_fix_delay_phase phase;
+ int idx, nr_pair;
+ int ret;
+ unsigned int delay;
+ unsigned int min_delay, max_delay;
+ bool invert, quarter;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ u32 coarse_step, fine_step;
+ const enum sampl_fix_delay_phase delay_edge[] = {
+ PHASE_0_DEGREE,
+ PHASE_180_DEGREE,
+ PHASE_90_DEGREE,
+ PHASE_270_DEGREE
+ };
+
+ coarse_step = phy_regs->delay_mask >> 1;
+ fine_step = coarse_step >> 2;
+
+ nr_pair = ARRAY_SIZE(delay_edge);
+
+ for (idx = 0; idx < nr_pair; idx++) {
+ phase = delay_edge[idx];
+ invert = (phase & 0x2) ? true : false;
+ quarter = (phase & 0x1) ? true : false;
+
+ /* increase delay value to get fix delay */
+ for (min_delay = 0;
+ min_delay <= phy_regs->delay_mask;
+ min_delay += coarse_step) {
+ ret = emmc_phy_do_fix_sampl_delay(host, card, min_delay,
+ invert, quarter);
+ if (!ret)
+ break;
+ }
+
+ if (ret) {
+ dev_dbg(mmc_dev(host->mmc),
+ "Fail to set Sampling Fixed Delay with phase = %d degree\n",
+ phase * 90);
+ continue;
+ }
+
+ for (max_delay = min_delay + fine_step;
+ max_delay < phy_regs->delay_mask;
+ max_delay += fine_step) {
+ ret = emmc_phy_do_fix_sampl_delay(host, card, max_delay,
+ invert, quarter);
+ if (ret) {
+ max_delay -= fine_step;
+ break;
+ }
+ }
+
+ if (!ret) {
+ ret = emmc_phy_do_fix_sampl_delay(host, card,
+ phy_regs->delay_mask,
+ invert, quarter);
+ if (!ret)
+ max_delay = phy_regs->delay_mask;
+ }
+
+ /*
+ * Sampling Fixed Delay line window should be large enough,
+ * thus the sampling point (the middle of the window)
+ * can work when environment varies.
+ * However, there is no clear conclusion how large the window
+ * should be.
+ */
+ if ((max_delay - min_delay) <=
+ EMMC_PHY_FIXED_DELAY_WINDOW_MIN) {
+ dev_info(mmc_dev(host->mmc),
+ "The window size %d with phase = %d degree is too small\n",
+ max_delay - min_delay, phase * 90);
+ continue;
+ }
+
+ delay = (min_delay + max_delay) / 2;
+ emmc_phy_set_fix_sampl_delay(host, delay, invert, quarter);
+ dev_dbg(mmc_dev(host->mmc),
+ "sampling fix delay = %d with phase = %d degree\n",
+ delay, phase * 90);
+ return 0;
+ }
+
+ return -EIO;
+}
+
+static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ u8 timeout;
+
+ if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+ return -EINVAL;
+
+ reg = sdhci_readl(host, phy_regs->dll_ctrl);
+ if (reg & DLL_ENABLE)
+ return 0;
+
+ /* Enable DLL */
+ reg = sdhci_readl(host, phy_regs->dll_ctrl);
+ reg |= (DLL_ENABLE | DLL_FAST_LOCK);
+
+ /*
+ * Set Phase as 90 degree, which is most common value.
+ * Might set another value if necessary.
+ * The granularity is 1 degree.
+ */
+ reg &= ~((DLL_PHASE_MASK << DLL_PHSEL0_SHIFT) |
+ (DLL_PHASE_MASK << DLL_PHSEL1_SHIFT));
+ reg |= ((DLL_PHASE_90_DEGREE << DLL_PHSEL0_SHIFT) |
+ (DLL_PHASE_90_DEGREE << DLL_PHSEL1_SHIFT));
+
+ reg &= ~DLL_BYPASS_EN;
+ reg |= phy_regs->dll_update;
+ if (priv->phy_type == EMMC_5_1_PHY)
+ reg &= ~DLL_REFCLK_SEL;
+ sdhci_writel(host, reg, phy_regs->dll_ctrl);
+
+ /* Wait max 32 ms */
+ timeout = 32;
+ while (!(sdhci_readw(host, SDHC_SLOT_EXT_PRESENT_STATE) & LOCK_STATE)) {
+ if (!timeout) {
+ dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ mdelay(1);
+ }
+ return 0;
+}
+
+static int __emmc_phy_config_tuning(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct emmc_phy_params *params = priv->phy_params;
+ u32 reg, tuning_step;
+ int ret;
+ unsigned long flags;
+
+ if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+ return -EINVAL;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ ret = xenon_emmc_phy_enable_dll(host);
+ if (ret) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+ }
+
+ reg = sdhci_readl(host, SDHC_SLOT_DLL_CUR_DLY_VAL);
+ tuning_step = reg / params->tun_step_divider;
+ if (unlikely(tuning_step > TUNING_STEP_MASK)) {
+ dev_warn(mmc_dev(host->mmc),
+ "HS200 TUNING_STEP %d is larger than MAX value\n",
+ tuning_step);
+ tuning_step = TUNING_STEP_MASK;
+ }
+
+ reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
+ reg &= ~(TUN_CONSECUTIVE_TIMES_MASK << TUN_CONSECUTIVE_TIMES_SHIFT);
+ reg |= (params->nr_tun_times << TUN_CONSECUTIVE_TIMES_SHIFT);
+ reg &= ~(TUNING_STEP_MASK << TUNING_STEP_SHIFT);
+ reg |= (tuning_step << TUNING_STEP_SHIFT);
+ sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ return 0;
+}
+
+static int xenon_emmc_phy_config_tuning(struct sdhci_host *host)
+{
+ return __emmc_phy_config_tuning(host);
+}
+
+static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ unsigned long flags;
+
+ if (host->clock <= MMC_HIGH_52_MAX_DTR)
+ return;
+
+ dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ xenon_emmc_phy_enable_dll(host);
+
+ /* Enable SDHC Data Strobe */
+ reg = sdhci_readl(host, SDHC_SLOT_EMMC_CTRL);
+ reg |= ENABLE_DATA_STROBE;
+ sdhci_writel(host, reg, SDHC_SLOT_EMMC_CTRL);
+
+ /* Set Data Strobe Pull down */
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ reg = sdhci_readl(host, EMMC_5_0_PHY_PAD_CONTROL);
+ reg |= EMMC5_FC_QSP_PD;
+ reg &= ~EMMC5_FC_QSP_PU;
+ sdhci_writel(host, reg, EMMC_5_0_PHY_PAD_CONTROL);
+ } else {
+ reg = sdhci_readl(host, EMMC_PHY_PAD_CONTROL1);
+ reg |= EMMC5_1_FC_QSP_PD;
+ reg &= ~EMMC5_1_FC_QSP_PU;
+ sdhci_writel(host, reg, EMMC_PHY_PAD_CONTROL1);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void __emmc_phy_disable_data_strobe(struct sdhci_host *host)
+{
+ u32 reg;
+
+ /* Disable SDHC Data Strobe */
+ reg = sdhci_readl(host, SDHC_SLOT_EMMC_CTRL);
+ reg &= ~ENABLE_DATA_STROBE;
+ sdhci_writel(host, reg, SDHC_SLOT_EMMC_CTRL);
+}
+
+#define LOGIC_TIMING_VALUE 0x00AA8977
+
+static void xenon_emmc_phy_set(struct sdhci_host *host,
+ unsigned char timing)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct emmc_phy_params *params = priv->phy_params;
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ struct mmc_card *card = priv->card_candidate;
+ unsigned long flags;
+
+ dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Setup pad, set bit[28] and bits[26:24] */
+ reg = sdhci_readl(host, phy_regs->pad_ctrl);
+ reg |= (FC_DQ_RECEN | FC_CMD_RECEN | FC_QSP_RECEN | OEN_QSN);
+ /*
+ * All FC_XX_RECEIVCE should be set as CMOS Type
+ */
+ reg |= FC_ALL_CMOS_RECEIVER;
+ sdhci_writel(host, reg, phy_regs->pad_ctrl);
+
+ /* Set CMD and DQ Pull Up */
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ reg = sdhci_readl(host, EMMC_5_0_PHY_PAD_CONTROL);
+ reg |= (EMMC5_FC_CMD_PU | EMMC5_FC_DQ_PU);
+ reg &= ~(EMMC5_FC_CMD_PD | EMMC5_FC_DQ_PD);
+ sdhci_writel(host, reg, EMMC_5_0_PHY_PAD_CONTROL);
+ } else {
+ reg = sdhci_readl(host, EMMC_PHY_PAD_CONTROL1);
+ reg |= (EMMC5_1_FC_CMD_PU | EMMC5_1_FC_DQ_PU);
+ reg &= ~(EMMC5_1_FC_CMD_PD | EMMC5_1_FC_DQ_PD);
+ sdhci_writel(host, reg, EMMC_PHY_PAD_CONTROL1);
+ }
+
+ if ((timing == MMC_TIMING_LEGACY) || !card)
+ goto phy_init;
+
+ /*
+ * FIXME: should depends on the specific board timing.
+ */
+ if ((timing == MMC_TIMING_MMC_HS400) ||
+ (timing == MMC_TIMING_MMC_HS200) ||
+ (timing == MMC_TIMING_UHS_SDR50) ||
+ (timing == MMC_TIMING_UHS_SDR104) ||
+ (timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_MMC_DDR52)) {
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg &= ~OUTPUT_QSN_PHASE_SELECT;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ }
+
+ /*
+ * If SDIO card, set SDIO Mode
+ * Otherwise, clear SDIO Mode and Slow Mode
+ */
+ if (mmc_card_sdio(card)) {
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg |= TIMING_ADJUST_SDIO_MODE;
+
+ if ((timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_UHS_SDR12) ||
+ (timing == MMC_TIMING_SD_HS) ||
+ (timing == MMC_TIMING_LEGACY))
+ reg |= TIMING_ADJUST_SLOW_MODE;
+
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ } else {
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg &= ~(TIMING_ADJUST_SDIO_MODE | TIMING_ADJUST_SLOW_MODE);
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ }
+
+ if (((timing == MMC_TIMING_UHS_SDR50) ||
+ (timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_UHS_SDR12) ||
+ (timing == MMC_TIMING_SD_HS) ||
+ (timing == MMC_TIMING_MMC_HS) ||
+ (timing == MMC_TIMING_LEGACY)) && params->slow_mode) {
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg |= TIMING_ADJUST_SLOW_MODE;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ }
+
+ /*
+ * Set preferred ZNR and ZPR value
+ * The ZNR and ZPR value vary between different boards.
+ * Define them both in sdhci-xenon-emmc-phy.h.
+ */
+ reg = sdhci_readl(host, phy_regs->pad_ctrl2);
+ reg &= ~((ZNR_MASK << ZNR_SHIFT) | ZPR_MASK);
+ reg |= ((params->znr << ZNR_SHIFT) | params->zpr);
+ sdhci_writel(host, reg, phy_regs->pad_ctrl2);
+
+ /*
+ * When setting EMMC_PHY_FUNC_CONTROL register,
+ * SD clock should be disabled
+ */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+ reg = sdhci_readl(host, phy_regs->func_ctrl);
+ if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_HS400) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ reg |= (DQ_DDR_MODE_MASK << DQ_DDR_MODE_SHIFT) | CMD_DDR_MODE;
+ else
+ reg &= ~((DQ_DDR_MODE_MASK << DQ_DDR_MODE_SHIFT) |
+ CMD_DDR_MODE);
+
+ if (timing == MMC_TIMING_MMC_HS400)
+ reg &= ~DQ_ASYNC_MODE;
+ else
+ reg |= DQ_ASYNC_MODE;
+ sdhci_writel(host, reg, phy_regs->func_ctrl);
+
+ /* Enable bus clock */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+ if (timing == MMC_TIMING_MMC_HS400)
+ /* Hardware team recommend a value for HS400 */
+ sdhci_writel(host, LOGIC_TIMING_VALUE,
+ phy_regs->logic_timing_adj);
+ else
+ __emmc_phy_disable_data_strobe(host);
+
+phy_init:
+ xenon_emmc_phy_init(host);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
+}
+
+static int get_dt_pad_ctrl_data(struct sdhci_host *host,
+ struct device_node *np,
+ struct emmc_phy_params *params)
+{
+ int ret = 0;
+ const char *name;
+ struct resource iomem;
+
+ if (of_device_is_compatible(np, "marvell,armada-3700-sdhci"))
+ params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set;
+ else
+ return 0;
+
+ if (of_address_to_resource(np, 1, &iomem)) {
+ dev_err(mmc_dev(host->mmc), "Unable to find SOC PAD ctrl register address for %s\n",
+ np->name);
+ return -EINVAL;
+ }
+
+ params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc),
+ &iomem);
+ if (IS_ERR(params->pad_ctrl.reg)) {
+ dev_err(mmc_dev(host->mmc), "Unable to get SOC PHY PAD ctrl regiser for %s\n",
+ np->name);
+ return PTR_ERR(params->pad_ctrl.reg);
+ }
+
+ ret = of_property_read_string(np, "marvell,pad-type", &name);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc), "Unable to determine SOC PHY PAD ctrl type\n");
+ return ret;
+ }
+ if (!strcmp(name, "sd")) {
+ params->pad_ctrl.pad_type = SOC_PAD_SD;
+ } else if (!strcmp(name, "fixed-1-8v")) {
+ params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V;
+ } else {
+ dev_err(mmc_dev(host->mmc), "Unsupported SOC PHY PAD ctrl type %s\n",
+ name);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int emmc_phy_parse_param_dt(struct sdhci_host *host,
+ struct device_node *np,
+ struct emmc_phy_params *params)
+{
+ u32 value;
+
+ if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode"))
+ params->slow_mode = true;
+ else
+ params->slow_mode = false;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value))
+ params->znr = value & ZNR_MASK;
+ else
+ params->znr = ZNR_DEF_VALUE;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value))
+ params->zpr = value & ZPR_MASK;
+ else
+ params->zpr = ZPR_DEF_VALUE;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun",
+ &value))
+ params->nr_tun_times = value & TUN_CONSECUTIVE_TIMES_MASK;
+ else
+ params->nr_tun_times = TUN_CONSECUTIVE_TIMES;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider",
+ &value))
+ params->tun_step_divider = value & 0xFF;
+ else
+ params->tun_step_divider = TUNING_STEP_DIVIDER;
+
+ return get_dt_pad_ctrl_data(host, np, params);
+}
+
+/*
+ * SDH PHY configuration and operations
+ */
+static int xenon_sdh_phy_set_fix_sampl_delay(struct sdhci_host *host,
+ unsigned int delay, bool invert)
+{
+ u32 reg;
+ unsigned long flags;
+ int ret;
+
+ if (invert)
+ invert = 0x1;
+ else
+ invert = 0x0;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Disable SDCLK */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
+ sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+ udelay(200);
+
+ /* Setup Sampling fix delay */
+ reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
+ reg &= ~(SDH_PHY_FIXED_DELAY_MASK |
+ (0x1 << FORCE_SEL_INVERSE_CLK_SHIFT));
+ reg |= ((delay & SDH_PHY_FIXED_DELAY_MASK) |
+ (invert << FORCE_SEL_INVERSE_CLK_SHIFT));
+ sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+
+ /* Enable SD internal clock */
+ ret = enable_xenon_internal_clk(host);
+
+ /* Enable SDCLK */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+ udelay(200);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+}
+
+static int sdh_phy_do_fix_sampl_delay(struct sdhci_host *host,
+ struct mmc_card *card,
+ unsigned int delay, bool invert)
+{
+ int ret;
+
+ xenon_sdh_phy_set_fix_sampl_delay(host, delay, invert);
+
+ ret = xenon_delay_adj_test(card);
+ if (ret) {
+ dev_dbg(mmc_dev(host->mmc),
+ "fail when sampling fix delay = %d, phase = %d degree\n",
+ delay, invert * 180);
+ return -1;
+ }
+ return 0;
+}
+
+#define SDH_PHY_COARSE_FIX_DELAY (SDH_PHY_FIXED_DELAY_MASK / 2)
+#define SDH_PHY_FINE_FIX_DELAY (SDH_PHY_COARSE_FIX_DELAY / 4)
+
+static int xenon_sdh_phy_fix_sampl_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card)
+{
+ u32 reg;
+ bool dll_enable = false;
+ unsigned int min_delay, max_delay, delay;
+ const bool sampl_edge[] = {
+ false,
+ true,
+ };
+ int i, nr;
+ int ret;
+
+ if (host->clock > HIGH_SPEED_MAX_DTR) {
+ /* Enable DLL when SDCLK is higher than 50MHz */
+ reg = sdhci_readl(host, SDH_PHY_SLOT_DLL_CTRL);
+ if (!(reg & SDH_PHY_ENABLE_DLL)) {
+ reg |= (SDH_PHY_ENABLE_DLL | SDH_PHY_FAST_LOCK_EN);
+ sdhci_writel(host, reg, SDH_PHY_SLOT_DLL_CTRL);
+ mdelay(1);
+
+ reg = sdhci_readl(host, SDH_PHY_SLOT_DLL_PHASE_SEL);
+ reg |= SDH_PHY_DLL_UPDATE_TUNING;
+ sdhci_writel(host, reg, SDH_PHY_SLOT_DLL_PHASE_SEL);
+ }
+ dll_enable = true;
+ }
+
+ nr = dll_enable ? ARRAY_SIZE(sampl_edge) : 1;
+ for (i = 0; i < nr; i++) {
+ for (min_delay = 0; min_delay <= SDH_PHY_FIXED_DELAY_MASK;
+ min_delay += SDH_PHY_COARSE_FIX_DELAY) {
+ ret = sdh_phy_do_fix_sampl_delay(host, card, min_delay,
+ sampl_edge[i]);
+ if (!ret)
+ break;
+ }
+
+ if (ret) {
+ dev_dbg(mmc_dev(host->mmc),
+ "Fail to set Fixed Sampling Delay with %s edge\n",
+ sampl_edge[i] ? "negative" : "positive");
+ continue;
+ }
+
+ for (max_delay = min_delay + SDH_PHY_FINE_FIX_DELAY;
+ max_delay < SDH_PHY_FIXED_DELAY_MASK;
+ max_delay += SDH_PHY_FINE_FIX_DELAY) {
+ ret = sdh_phy_do_fix_sampl_delay(host, card, max_delay,
+ sampl_edge[i]);
+ if (ret) {
+ max_delay -= SDH_PHY_FINE_FIX_DELAY;
+ break;
+ }
+ }
+
+ if (!ret) {
+ delay = SDH_PHY_FIXED_DELAY_MASK;
+ ret = sdh_phy_do_fix_sampl_delay(host, card, delay,
+ sampl_edge[i]);
+ if (!ret)
+ max_delay = SDH_PHY_FIXED_DELAY_MASK;
+ }
+
+ if ((max_delay - min_delay) <= SDH_PHY_FIXED_DELAY_WINDOW_MIN) {
+ dev_info(mmc_dev(host->mmc),
+ "The window size %d with %s edge is too small\n",
+ max_delay - min_delay,
+ sampl_edge[i] ? "negative" : "positive");
+ continue;
+ }
+
+ delay = (min_delay + max_delay) / 2;
+ xenon_sdh_phy_set_fix_sampl_delay(host, delay, sampl_edge[i]);
+ dev_dbg(mmc_dev(host->mmc), "sampling fix delay = %d with %s edge\n",
+ delay, sampl_edge[i] ? "negative" : "positive");
+ return 0;
+ }
+ return -EIO;
+}
+
+static const struct xenon_phy_ops sdh_phy_ops = {
+ .fix_sampl_delay_adj = xenon_sdh_phy_fix_sampl_delay_adj,
+};
+
+static int alloc_sdh_phy(struct sdhci_xenon_priv *priv)
+{
+ priv->phy_params = NULL;
+ priv->phy_ops = &sdh_phy_ops;
+ return 0;
+}
+
+/*
+ * Common functions for all PHYs
+ */
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+ unsigned char signal_voltage)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ if (priv->phy_ops->set_soc_pad)
+ priv->phy_ops->set_soc_pad(host, signal_voltage);
+}
+
+static int __xenon_emmc_delay_adj_test(struct mmc_card *card)
+{
+ int err;
+ u8 *ext_csd = NULL;
+
+ err = mmc_get_ext_csd(card, &ext_csd);
+ kfree(ext_csd);
+
+ return err;
+}
+
+static int __xenon_sdio_delay_adj_test(struct mmc_card *card)
+{
+ struct mmc_command cmd = {0};
+ int err;
+
+ cmd.opcode = SD_IO_RW_DIRECT;
+ cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err)
+ return err;
+
+ if (cmd.resp[0] & R5_ERROR)
+ return -EIO;
+ if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+ return -EINVAL;
+ if (cmd.resp[0] & R5_OUT_OF_RANGE)
+ return -ERANGE;
+ return 0;
+}
+
+static int __xenon_sd_delay_adj_test(struct mmc_card *card)
+{
+ struct mmc_command cmd = {0};
+ int err;
+
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ return err;
+}
+
+static int xenon_delay_adj_test(struct mmc_card *card)
+{
+ WARN_ON(!card);
+ WARN_ON(!card->host);
+
+ if (mmc_card_mmc(card))
+ return __xenon_emmc_delay_adj_test(card);
+ else if (mmc_card_sd(card))
+ return __xenon_sd_delay_adj_test(card);
+ else if (mmc_card_sdio(card))
+ return __xenon_sdio_delay_adj_test(card);
+ else
+ return -EINVAL;
+}
+
+static void xenon_phy_set(struct sdhci_host *host, unsigned char timing)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ if (priv->phy_ops->phy_set)
+ priv->phy_ops->phy_set(host, timing);
+}
+
+static void xenon_hs400_strobe_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ if (WARN_ON(!mmc_card_hs400(card)))
+ return;
+
+ /* Enable the DLL to automatically adjust HS400 strobe delay.
+ */
+ if (priv->phy_ops->strobe_delay_adj)
+ priv->phy_ops->strobe_delay_adj(host, card);
+}
+
+static int xenon_fix_sampl_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ if (priv->phy_ops->fix_sampl_delay_adj)
+ return priv->phy_ops->fix_sampl_delay_adj(host, card);
+
+ return 0;
+}
+
+/*
+ * xenon_delay_adj should not be called inside IRQ context,
+ * either Hard IRQ or Softirq.
+ */
+static int xenon_hs_delay_adj(struct sdhci_host *host,
+ struct mmc_card *card)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret = 0;
+
+ if (WARN_ON(host->clock <= DEFAULT_SDCLK_FREQ))
+ return -EINVAL;
+
+ if (mmc_card_hs400(card)) {
+ xenon_hs400_strobe_delay_adj(host, card);
+ return 0;
+ }
+
+ if (((priv->phy_type == EMMC_5_1_PHY) ||
+ (priv->phy_type == EMMC_5_0_PHY)) &&
+ (mmc_card_hs200(card) ||
+ (host->timing == MMC_TIMING_UHS_SDR104))) {
+ ret = xenon_emmc_phy_config_tuning(host);
+ if (!ret)
+ return 0;
+ }
+
+ ret = xenon_fix_sampl_delay_adj(host, card);
+ if (ret)
+ dev_err(mmc_dev(host->mmc), "fails sampling fixed delay adjustment\n");
+ return ret;
+}
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ struct mmc_host *mmc = host->mmc;
+ struct mmc_card *card;
+ int ret = 0;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ if (!host->clock) {
+ priv->clock = 0;
+ return 0;
+ }
+
+ /*
+ * The timing, frequency or bus width is changed,
+ * better to set eMMC PHY based on current setting
+ * and adjust Xenon SDHC delay.
+ */
+ if ((host->clock == priv->clock) &&
+ (ios->bus_width == priv->bus_width) &&
+ (ios->timing == priv->timing))
+ return 0;
+
+ xenon_phy_set(host, ios->timing);
+
+ /* Update the record */
+ priv->bus_width = ios->bus_width;
+ /* Temp stage from HS200 to HS400 */
+ if (((priv->timing == MMC_TIMING_MMC_HS200) &&
+ (ios->timing == MMC_TIMING_MMC_HS)) ||
+ ((ios->timing == MMC_TIMING_MMC_HS) &&
+ (priv->clock > host->clock))) {
+ priv->timing = ios->timing;
+ priv->clock = host->clock;
+ return 0;
+ }
+ /*
+ * Skip temp stages from HS400 t0 HS200:
+ * from 200MHz to 52MHz in HS400
+ * from HS400 to HS DDR in 52MHz
+ * from HS DDR to HS in 52MHz
+ * from HS to HS200 in 52MHz
+ */
+ if (((priv->timing == MMC_TIMING_MMC_HS400) &&
+ ((host->clock == MMC_HIGH_52_MAX_DTR) ||
+ (ios->timing == MMC_TIMING_MMC_DDR52))) ||
+ ((priv->timing == MMC_TIMING_MMC_DDR52) &&
+ (ios->timing == MMC_TIMING_MMC_HS)) ||
+ ((ios->timing == MMC_TIMING_MMC_HS200) &&
+ (ios->clock == MMC_HIGH_52_MAX_DTR))) {
+ priv->timing = ios->timing;
+ priv->clock = host->clock;
+ return 0;
+ }
+ priv->timing = ios->timing;
+ priv->clock = host->clock;
+
+ /* Legacy mode is a special case */
+ if (ios->timing == MMC_TIMING_LEGACY)
+ return 0;
+
+ if (mmc->card)
+ card = mmc->card;
+ else
+ /*
+ * Only valid during initialization
+ * before mmc->card is set
+ */
+ card = priv->card_candidate;
+ if (unlikely(!card)) {
+ dev_warn(mmc_dev(mmc), "card is not present\n");
+ return -EINVAL;
+ }
+
+ if (host->clock > DEFAULT_SDCLK_FREQ)
+ ret = xenon_hs_delay_adj(host, card);
+ return ret;
+}
+
+static int add_xenon_phy(struct device_node *np, struct sdhci_host *host,
+ const char *phy_name)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int i, ret;
+
+ for (i = 0; i < NR_PHY_TYPES; i++) {
+ if (!strcmp(phy_name, phy_types[i])) {
+ priv->phy_type = i;
+ break;
+ }
+ }
+ if (i == NR_PHY_TYPES) {
+ dev_err(mmc_dev(host->mmc),
+ "Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
+ phy_name);
+ priv->phy_type = EMMC_5_1_PHY;
+ }
+
+ if (priv->phy_type == SDH_PHY) {
+ return alloc_sdh_phy(priv);
+ } else if ((priv->phy_type == EMMC_5_0_PHY) ||
+ (priv->phy_type == EMMC_5_1_PHY)) {
+ ret = alloc_emmc_phy(priv);
+ if (ret)
+ return ret;
+ return emmc_phy_parse_param_dt(host, np, priv->phy_params);
+ }
+
+ return -EINVAL;
+}
+
+int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+{
+ const char *phy_type = NULL;
+
+ if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type))
+ return add_xenon_phy(np, host, phy_type);
+
+ dev_err(mmc_dev(host->mmc), "Fail to get Xenon PHY type. Use default eMMC 5.1 PHY\n");
+ return add_xenon_phy(np, host, "emmc 5.1 phy");
+}
diff --git a/drivers/mmc/host/sdhci-xenon-phy.h b/drivers/mmc/host/sdhci-xenon-phy.h
new file mode 100644
index 000000000000..4373c71d3b7b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.h
@@ -0,0 +1,157 @@
+/* linux/drivers/mmc/host/sdhci-xenon-phy.h
+ *
+ * Author: Hu Ziji <huziji@xxxxxxxxxxx>
+ * Date: 2016-8-24
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef SDHCI_XENON_PHY_H_
+#define SDHCI_XENON_PHY_H_
+
+#include <linux/types.h>
+#include "sdhci.h"
+
+/* Register base for eMMC PHY 5.0 Version */
+#define EMMC_5_0_PHY_REG_BASE 0x0160
+/* Register base for eMMC PHY 5.1 Version */
+#define EMMC_PHY_REG_BASE 0x0170
+
+#define EMMC_PHY_TIMING_ADJUST EMMC_PHY_REG_BASE
+#define EMMC_5_0_PHY_TIMING_ADJUST EMMC_5_0_PHY_REG_BASE
+#define TIMING_ADJUST_SLOW_MODE BIT(29)
+#define TIMING_ADJUST_SDIO_MODE BIT(28)
+#define OUTPUT_QSN_PHASE_SELECT BIT(17)
+#define SAMPL_INV_QSP_PHASE_SELECT BIT(18)
+#define SAMPL_INV_QSP_PHASE_SELECT_SHIFT 18
+#define PHY_INITIALIZAION BIT(31)
+#define WAIT_CYCLE_BEFORE_USING_MASK 0xF
+#define WAIT_CYCLE_BEFORE_USING_SHIFT 12
+#define FC_SYNC_EN_DURATION_MASK 0xF
+#define FC_SYNC_EN_DURATION_SHIFT 8
+#define FC_SYNC_RST_EN_DURATION_MASK 0xF
+#define FC_SYNC_RST_EN_DURATION_SHIFT 4
+#define FC_SYNC_RST_DURATION_MASK 0xF
+#define FC_SYNC_RST_DURATION_SHIFT 0
+
+#define EMMC_PHY_FUNC_CONTROL (EMMC_PHY_REG_BASE + 0x4)
+#define EMMC_5_0_PHY_FUNC_CONTROL (EMMC_5_0_PHY_REG_BASE + 0x4)
+#define ASYNC_DDRMODE_MASK BIT(23)
+#define ASYNC_DDRMODE_SHIFT 23
+#define CMD_DDR_MODE BIT(16)
+#define DQ_DDR_MODE_SHIFT 8
+#define DQ_DDR_MODE_MASK 0xFF
+#define DQ_ASYNC_MODE BIT(4)
+
+#define EMMC_PHY_PAD_CONTROL (EMMC_PHY_REG_BASE + 0x8)
+#define EMMC_5_0_PHY_PAD_CONTROL (EMMC_5_0_PHY_REG_BASE + 0x8)
+#define REC_EN_SHIFT 24
+#define REC_EN_MASK 0xF
+#define FC_DQ_RECEN BIT(24)
+#define FC_CMD_RECEN BIT(25)
+#define FC_QSP_RECEN BIT(26)
+#define FC_QSN_RECEN BIT(27)
+#define OEN_QSN BIT(28)
+#define AUTO_RECEN_CTRL BIT(30)
+#define FC_ALL_CMOS_RECEIVER 0xF000
+
+#define EMMC5_FC_QSP_PD BIT(18)
+#define EMMC5_FC_QSP_PU BIT(22)
+#define EMMC5_FC_CMD_PD BIT(17)
+#define EMMC5_FC_CMD_PU BIT(21)
+#define EMMC5_FC_DQ_PD BIT(16)
+#define EMMC5_FC_DQ_PU BIT(20)
+
+#define EMMC_PHY_PAD_CONTROL1 (EMMC_PHY_REG_BASE + 0xC)
+#define EMMC5_1_FC_QSP_PD BIT(9)
+#define EMMC5_1_FC_QSP_PU BIT(25)
+#define EMMC5_1_FC_CMD_PD BIT(8)
+#define EMMC5_1_FC_CMD_PU BIT(24)
+#define EMMC5_1_FC_DQ_PD 0xFF
+#define EMMC5_1_FC_DQ_PU (0xFF << 16)
+
+#define EMMC_PHY_PAD_CONTROL2 (EMMC_PHY_REG_BASE + 0x10)
+#define EMMC_5_0_PHY_PAD_CONTROL2 (EMMC_5_0_PHY_REG_BASE + 0xC)
+#define ZNR_MASK 0x1F
+#define ZNR_SHIFT 8
+#define ZPR_MASK 0x1F
+/* Perferred ZNR and ZPR value vary between different boards.
+ * The specific ZNR and ZPR value should be defined here
+ * according to board actual timing.
+ */
+#define ZNR_DEF_VALUE 0xF
+#define ZPR_DEF_VALUE 0xF
+
+#define EMMC_PHY_DLL_CONTROL (EMMC_PHY_REG_BASE + 0x14)
+#define EMMC_5_0_PHY_DLL_CONTROL (EMMC_5_0_PHY_REG_BASE + 0x10)
+#define DLL_ENABLE BIT(31)
+#define DLL_UPDATE_STROBE_5_0 BIT(30)
+#define DLL_REFCLK_SEL BIT(30)
+#define DLL_UPDATE BIT(23)
+#define DLL_PHSEL1_SHIFT 24
+#define DLL_PHSEL0_SHIFT 16
+#define DLL_PHASE_MASK 0x3F
+#define DLL_PHASE_90_DEGREE 0x1F
+#define DLL_FAST_LOCK BIT(5)
+#define DLL_GAIN2X BIT(3)
+#define DLL_BYPASS_EN BIT(0)
+
+#define EMMC_5_0_PHY_LOGIC_TIMING_ADJUST (EMMC_5_0_PHY_REG_BASE + 0x14)
+#define EMMC_PHY_LOGIC_TIMING_ADJUST (EMMC_PHY_REG_BASE + 0x18)
+
+enum sampl_fix_delay_phase {
+ PHASE_0_DEGREE = 0x0,
+ PHASE_90_DEGREE = 0x1,
+ PHASE_180_DEGREE = 0x2,
+ PHASE_270_DEGREE = 0x3,
+};
+
+#define SDH_PHY_SLOT_DLL_CTRL (0x0138)
+#define SDH_PHY_ENABLE_DLL BIT(1)
+#define SDH_PHY_FAST_LOCK_EN BIT(5)
+
+#define SDH_PHY_SLOT_DLL_PHASE_SEL (0x013C)
+#define SDH_PHY_DLL_UPDATE_TUNING BIT(15)
+
+enum soc_pad_ctrl_type {
+ SOC_PAD_SD,
+ SOC_PAD_FIXED_1_8V,
+};
+
+/*
+ * List offset of PHY registers and some special register values
+ * in eMMC PHY 5.0 or eMMC PHY 5.1
+ */
+struct xenon_emmc_phy_regs {
+ /* Offset of Timing Adjust register */
+ u16 timing_adj;
+ /* Offset of Func Control register */
+ u16 func_ctrl;
+ /* Offset of Pad Control register */
+ u16 pad_ctrl;
+ /* Offset of Pad Control register */
+ u16 pad_ctrl2;
+ /* Offset of DLL Control register */
+ u16 dll_ctrl;
+ /* Offset of Logic Timing Adjust register */
+ u16 logic_timing_adj;
+ /* Max value of eMMC Fixed Sampling Delay */
+ u32 delay_mask;
+ /* DLL Update Enable bit */
+ u32 dll_update;
+};
+
+struct xenon_phy_ops {
+ void (*strobe_delay_adj)(struct sdhci_host *host,
+ struct mmc_card *card);
+ int (*fix_sampl_delay_adj)(struct sdhci_host *host,
+ struct mmc_card *card);
+ void (*phy_set)(struct sdhci_host *host, unsigned char timing);
+ void (*set_soc_pad)(struct sdhci_host *host,
+ unsigned char signal_voltage);
+};
+#endif
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 3ea059f2aaab..ee02014a2917 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -228,6 +228,7 @@ static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_unlock_irqrestore(&host->lock, flags);
sdhci_set_ios(mmc, ios);
+ xenon_phy_adj(host, ios);
if (host->clock > DEFAULT_SDCLK_FREQ) {
spin_lock_irqsave(&host->lock, flags);
@@ -313,6 +314,8 @@ static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
*/
enable_xenon_internal_clk(host);
+ xenon_soc_pad_ctrl(host, ios->signal_voltage);
+
if (priv->emmc_slot)
return xenon_emmc_signal_voltage_switch(mmc, ios);
@@ -448,6 +451,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
sdhci_writel(host, reg, SDHC_SYS_EXT_OP_CTRL);
}
+ err = xenon_phy_parse_dt(np, host);
return err;
}
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index 4601d0a4b22f..e6ee47c227aa 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -15,6 +15,7 @@
#include <linux/mmc/card.h>
#include <linux/of.h>
#include "sdhci.h"
+#include "sdhci-xenon-phy.h"
/* Register Offset of SD Host Controller SOCP self-defined register */
#define SDHC_SYS_CFG_INFO 0x0104
@@ -76,6 +77,7 @@
#define MMC_TIMING_FAKE 0xFF
#define DEFAULT_SDCLK_FREQ (400000)
+#define LOWEST_SDCLK_FREQ (100000)
/* Xenon specific Mode Select value */
#define XENON_SDHCI_CTRL_HS200 0x5
@@ -99,6 +101,15 @@ struct sdhci_xenon_priv {
/* Whether this slot is for eMMC */
bool emmc_slot;
+ int phy_type;
+ /*
+ * Contains board-specific PHY parameters
+ * passed from device tree.
+ */
+ void *phy_params;
+ const struct xenon_phy_ops *phy_ops;
+ struct xenon_emmc_phy_regs *emmc_phy_regs;
+
/*
* When initializing card, Xenon has to determine card type and
* adjust Sampling Fixed delay for the speed mode in which
@@ -139,4 +150,10 @@ static inline int enable_xenon_internal_clk(struct sdhci_host *host)
return 0;
}
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
+int xenon_phy_parse_dt(struct device_node *np,
+ struct sdhci_host *host);
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+ unsigned char signal_voltage);
#endif
--
git-series 0.8.10