[PATCH v5 7/8] Documentation: bindings: Add support for Amlogic GXBB SCPI protocol

[Sudeep Holla]

From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>

Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
(decoupled from the generic scpi binding)
Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx>
---
 .../devicetree/bindings/arm/amlogic,scpi.txt         | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/amlogic,scpi.txt

diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt
new file mode 100644
index 000000000000..7b9a861e9306
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt
@@ -0,0 +1,20 @@
+System Control and Power Interface (SCPI) Message Protocol
+(in addition to the standard binding in [0])
+----------------------------------------------------------
+Required properties
+
+- compatible : should be "amlogic,meson-gxbb-scpi"
+
+AMLOGIC SRAM and Shared Memory for SCPI
+------------------------------------
+
+Required properties:
+- compatible : should be "amlogic,meson-gxbb-sram"
+
+Each sub-node represents the reserved area for SCPI.
+
+Required sub-node properties:
+- compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared
+		memory on Amlogic GXBB SoC.
+
+[0] Documentation/devicetree/bindings/arm/arm,scpi.txt
-- 
1.9.1