[PATCH v2 11/14] ASoC: sun4i-codec: Add support for A31 board level audio routing
From: Chen-Yu Tsai
Date: Thu Nov 03 2016 - 03:57:44 EST
The A31 SoC's codec has various inputs, outputs and microphone bias
supplies. These can be routed on the board in different ways, such as:
- HPCOM may be connected to have the headphone DC coupled.
- Microphones all use the MBIAS main microphone supply or one mic may
use the HBIAS supply, which supports headset detection and buttons.
- Line Out may be routed to an audio jack, or an onboard speaker amp
with power controls.
Add support for specifying the audio routes in the device tree.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
.../devicetree/bindings/sound/sun4i-codec.txt | 33 ++++++++++++++++++++++
sound/soc/sunxi/sun4i-codec.c | 21 ++++++++++++--
2 files changed, 52 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index bf480e9683a3..d91a95377f49 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -22,6 +22,31 @@ Optional properties:
Required properties for the following compatibles:
- "allwinner,sun6i-a31-codec"
- resets: phandle to the reset control for this device
+- allwinner,audio-routing: A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's
+ source. Valid names include:
+
+ Audio pins on the SoC:
+ "HP"
+ "HPCOM"
+ "LINEIN"
+ "LINEOUT"
+ "MIC1"
+ "MIC2"
+ "MIC3"
+
+ Microphone biases from the SoC:
+ "HBIAS"
+ "MBIAS"
+
+ Board connectors:
+ "Headphone"
+ "Headset Mic"
+ "Line In"
+ "Line Out"
+ "Mic"
+ "Speaker"
Example:
codec: codec@01c22c00 {
@@ -45,4 +70,12 @@ codec: codec@01c22c00 {
resets = <&ccu RST_APB1_CODEC>;
dmas = <&dma 15>, <&dma 15>;
dma-names = "rx", "tx";
+ allwinner,audio-routing =
+ "Headphone", "HP",
+ "Speaker", "LINEOUT",
+ "LINEIN", "Line In",
+ "MIC1", "MBIAS",
+ "MIC1", "Mic",
+ "MIC2", "HBIAS",
+ "MIC2", "Headset Mic";
};
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 0cb728964ff0..6379efd21f00 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -1171,9 +1171,19 @@ static struct snd_soc_card *sun4i_codec_create_card(struct device *dev)
return card;
};
+static const struct snd_soc_dapm_widget sun6i_codec_card_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Mic", NULL),
+ SND_SOC_DAPM_SPK("Speaker", sun4i_codec_spk_event),
+};
+
static struct snd_soc_card *sun6i_codec_create_card(struct device *dev)
{
struct snd_soc_card *card;
+ int ret;
card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
if (!card)
@@ -1183,8 +1193,15 @@ static struct snd_soc_card *sun6i_codec_create_card(struct device *dev)
if (!card->dai_link)
return ERR_PTR(-ENOMEM);
- card->dev = dev;
- card->name = "A31 Audio Codec";
+ card->dev = dev;
+ card->name = "A31 Audio Codec";
+ card->dapm_widgets = sun6i_codec_card_dapm_widgets;
+ card->num_dapm_widgets = ARRAY_SIZE(sun6i_codec_card_dapm_widgets);
+ card->fully_routed = true;
+
+ ret = snd_soc_of_parse_audio_routing(card, "allwinner,audio-routing");
+ if (ret)
+ dev_warn(dev, "failed to parse audio-routing: %d\n", ret);
return card;
};
--
2.10.2