Re: [PATCH v3 5/6] Documentation: bindings: add documentation for ir-spi device driver

[Jacek Anaszewski]

Hi Andi,

Only DT bindings of LED class drivers should be placed in
Documentation/devicetree/bindings/leds. Please move it to the
media bindings.

Thanks,
Jacek Anaszewski

On 11/02/2016 11:40 AM, Andi Shyti wrote:
> Document the ir-spi driver's binding which is a IR led driven
> through the SPI line.
>
> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/leds/spi-ir-led.txt        | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/spi-ir-led.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/spi-ir-led.txt
> new file mode 100644
> index 0000000..896b699
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/spi-ir-led.txt
> @@ -0,0 +1,29 @@
> +Device tree bindings for IR LED connected through SPI bus which is used as
> +remote controller.
> +
> +The IR LED switch is connected to the MOSI line of the SPI device and the data
> +are delivered thourgh that.
> +
> +Required properties:
> +	- compatible: should be "ir-spi-led".
> +
> +Optional properties:
> +	- duty-cycle: 8 bit balue that represents the percentage of one period
> +	  in which the signal is active.  It can be 50, 60, 70, 75, 80 or 90.
> +	- led-active-low: boolean value that specifies whether the output is
> +	  negated with a NOT gate.
> +	- power-supply: specifies the power source. It can either be a regulator
> +	  or a gpio which enables a regulator, i.e. a regulator-fixed as
> +	  described in
> +	  Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> +
> +Example:
> +
> +	irled@0 {
> +		compatible = "ir-spi-led";
> +		reg = <0x0>;
> +		spi-max-frequency = <5000000>;
> +		power-supply = <&vdd_led>;
> +		led-active-low;
> +		duty-cycle = /bits/ 8 <60>;
> +	};