[PATCH v6 0/7] add NS2 support to bgmac

From: Jon Mason
Date: Fri Nov 04 2016 - 01:12:58 EST

Changes in v6:
* Use a common bgmac_phy_connect_direct (per Rafal Milecki)
* Rebased on latest net-next
* Added Reviewed-by to the relevant patches

Changes in v5:
* Change a pr_err to netdev_err (per Scott Branden)
* Reword the lane swap binding documentation (per Andrew Lunn)

Changes in v4:
* Actually send out the lane swap binding doc patch (Per Scott Branden)
* Remove unused #define (Per Andrew Lunn)

Changes in v3:
* Clean-up the bgmac DT binding doc (per Rob Herring)
* Document the lane swap binding and make it generic (Per Andrew Lunn)

Changes in v2:
* Remove the PHY power-on (per Andrew Lunn)
* Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
This results on none of the original PHY code from Vikas being
present. So, I'm removing him as an author and giving him
"Inspired-by" credit.
* Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
* Remove bgmac sleep (per Florian Fainelli)
* Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
* Rebased on latest net-next
* Added patch for bcm54xx_auxctl_read, which is used in the BCM54810

Jon Mason (7):
net: phy: broadcom: add bcm54xx_auxctl_read
Documentation: devicetree: add PHY lane swap binding
net: phy: broadcom: Add BCM54810 PHY entry
Documentation: devicetree: net: add NS2 bindings to amac
net: ethernet: bgmac: device tree phy enablement
net: ethernet: bgmac: add NS2 support
arm64: dts: NS2: add AMAC ethernet support

.../devicetree/bindings/net/brcm,amac.txt | 16 +++--
Documentation/devicetree/bindings/net/phy.txt | 4 ++
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 5 ++
arch/arm64/boot/dts/broadcom/ns2.dtsi | 12 ++++
drivers/net/ethernet/broadcom/bgmac-bcma.c | 22 +++++++
drivers/net/ethernet/broadcom/bgmac-platform.c | 74 +++++++++++++++++++++-
drivers/net/ethernet/broadcom/bgmac.c | 32 +++-------
drivers/net/ethernet/broadcom/bgmac.h | 9 +++
drivers/net/phy/Kconfig | 2 +-
drivers/net/phy/broadcom.c | 68 +++++++++++++++++++-
include/linux/brcmphy.h | 10 +++
11 files changed, 222 insertions(+), 32 deletions(-)