Re: [PATCH 6/9] staging: iio: tsl2583: remove redudant i2c call in taos_als_calibrate()

[Jonathan Cameron]

On 03/11/16 12:56, Brian Masney wrote:
> taos_als_calibrate() queries the control register to determine if the
> unit is powered on and has the ADC enabled. It then queries the same
> register a second time to determine if the ADC reading is valid. This
> patch removes the redundant i2c_smbus_read_byte_data() call.
> 
> Verified that the driver still functions correctly using a TSL2581
> hooked up to a Raspberry Pi 2.
> 
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Applied.

Thanks,

Jonathan
> ---
>  drivers/staging/iio/light/tsl2583.c | 13 +------------
>  1 file changed, 1 insertion(+), 12 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
> index af1cf9b..7eab17f 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -338,18 +338,7 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
>  		dev_err(&chip->client->dev,
>  			"taos_als_calibrate failed: device not powered on with ADC enabled\n");
>  		return -EINVAL;
> -	}
> -
> -	ret = i2c_smbus_read_byte_data(chip->client,
> -				       TSL258X_CMD_REG | TSL258X_CNTRL);
> -	if (ret < 0) {
> -		dev_err(&chip->client->dev,
> -			"%s failed to read from the CNTRL register\n",
> -			__func__);
> -		return ret;
> -	}
> -
> -	if ((ret & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) {
> +	} else if ((ret & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) {
>  		dev_err(&chip->client->dev,
>  			"taos_als_calibrate failed: STATUS - ADC not valid.\n");
>  		return -ENODATA;
>