[PATCH v3 3/3] ARM: dmaengine: sun6i: share the dma driver with sun50i
From: Hao Zhang
Date: Mon Nov 07 2016 - 13:45:08 EST
According to the datasheet, the dma of A64 support 8/16/32/64 bits
so, we can add the condition of device compatible in convert_buswidth
function and other place to determine the device whether is for A64,
and then accept the 8 bytes bus width to it.
Signed-off-by: Hao Zhang <hao5781286@xxxxxxxxx>
---
drivers/dma/sun6i-dma.c | 43 +++++++++++++++++++++++++++++++++----------
1 file changed, 33 insertions(+), 10 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 8346199..8a95a1a 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -247,13 +247,17 @@ static inline s8 convert_burst(u32 maxburst)
}
}
-static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
+static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width,
+ struct sun6i_dma_dev *sdev)
{
- if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) ||
- (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
+ if (((addr_width >= DMA_SLAVE_BUSWIDTH_1_BYTE) &&
+ (addr_width <= DMA_SLAVE_BUSWIDTH_4_BYTES)) ||
+ ((addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) &&
+ (of_device_is_compatible(sdev->slave.dev->of_node,
+ "allwinner,sun50i-a64-dma"))))
+ return addr_width >> 1;
+ else
return -EINVAL;
-
- return addr_width >> 1;
}
static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
@@ -508,19 +512,19 @@ static int set_config(struct sun6i_dma_dev *sdev,
src_width = convert_buswidth(sconfig->src_addr_width !=
DMA_SLAVE_BUSWIDTH_UNDEFINED ?
sconfig->src_addr_width :
- DMA_SLAVE_BUSWIDTH_4_BYTES);
+ DMA_SLAVE_BUSWIDTH_4_BYTES, sdev);
dst_burst = convert_burst(sconfig->dst_maxburst);
- dst_width = convert_buswidth(sconfig->dst_addr_width);
+ dst_width = convert_buswidth(sconfig->dst_addr_width, sdev);
break;
case DMA_DEV_TO_MEM:
src_burst = convert_burst(sconfig->src_maxburst);
- src_width = convert_buswidth(sconfig->src_addr_width);
+ src_width = convert_buswidth(sconfig->src_addr_width, sdev);
dst_burst = convert_burst(sconfig->dst_maxburst ?
sconfig->dst_maxburst : 8);
dst_width = convert_buswidth(sconfig->dst_addr_width !=
DMA_SLAVE_BUSWIDTH_UNDEFINED ?
sconfig->dst_addr_width :
- DMA_SLAVE_BUSWIDTH_4_BYTES);
+ DMA_SLAVE_BUSWIDTH_4_BYTES, sdev);
break;
default:
return -EINVAL;
@@ -577,7 +581,7 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
v_lli->para = NORMAL_WAIT;
burst = convert_burst(8);
- width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES, sdev);
v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_LINEAR_MODE |
@@ -1028,11 +1032,23 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
.nr_max_vchans = 34,
};
+/*
+ * The A64 has 8 physical channels, a maximum DRQ port id of 27,
+ * and a total of 38 usable source and destination endpoints.
+ */
+
+static struct sun6i_dma_config sun50i_a64_dma_cfg = {
+ .nr_max_channels = 8,
+ .nr_max_requests = 27,
+ .nr_max_vchans = 38,
+};
+
static const struct of_device_id sun6i_dma_match[] = {
{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
+ { .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun6i_dma_match);
@@ -1112,6 +1128,13 @@ static int sun6i_dma_probe(struct platform_device *pdev)
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
BIT(DMA_MEM_TO_DEV);
+
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun50i-a64-dma")) {
+ sdc->slave.src_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+ sdc->slave.dst_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+ }
+
sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
sdc->slave.dev = &pdev->dev;
--
2.7.4