Re: [PATCH V3 1/9] Documentation: devicetree: input: additions for da9061 onkey driver

[Rob Herring]

On Mon, Oct 31, 2016 at 04:02:02PM +0000, Steve Twiss wrote:
> From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
> 
> Add binding information for DA9061 onkey.
> 
> This patch updates the compatible string "dlg,da9061-onkey" to support
> DA9061, removes the reference to KEY_SLEEP (which the driver no longer
> supports) and fixes a typo in the example for DA9063.
> 
> Supporting KEY_SLEEP was not the general convention and the typical
> solution should have been for KEY_POWER to support both cases of suspend
> and S/W power off. This change was sent to the DA9063 ONKEY device
> driver in a separate patch, but the documentation was not updated at
> that time.
> - f889bea Report KEY_POWER instead of KEY_SLEEP during power key-press
> 
> This patch also adds two new examples, one for DA9062 and one for DA9061.
> The DA9061 examples uses a fall-back compatible string for the DA9062
> onkey driver.
> 
> Signed-off-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
> 
> ---
> This patch applies against linux-next and v4.8
> 
> v2 -> v3
>  - Patch renamed from [PATCH V2 01/10] to [PATCH V3 1/9]
>  - Each compatible line should be a valid combination of compatible
>    strings, alter DA9061 line to include the fall back compatible string
>  - Update the commit message to include KEY_SLEEP removal explanation and
>    a link back to the original device driver commit. This will allow full
>    traceability back to the original patch change
>  - Link in information about associated patches from this set without
>    describing them as being explicitly dependent on this binding
> 
> v1 -> v2
>  - Patch renamed from [PATCH V1 06/10] to [PATCH V2 01/10] -- these
>    changes were made to fix checkpatch warnings caused by the patch
>    set dependency order
>  - Typo s/ther/the/ in commit message
>  - Explanation about why KEY_SLEEP was removed (see below)
>  - Addition of DA9062 example
>  - Addition of a DA9061 example to follow the driver fall-back compatible
>    convention being applied for this device driver
> 
> Hi,
> 
> There is also new binding examples for DA9062 and DA9061. Importantly,
> the Linux device driver changes for DA9061 were rejected because the
> DA9062 device driver can be reused. For this reason, the DA9061 example
> uses a fall-back compatible string.
> 
> Other information:
> The device driver from this patch set (associated with this binding) was
> applied by Dmitry Torokhov on 26-Oct-2016. See:
>  - [PATCH V2 07/10] Input: da9061: onkey driver.
>  - https://lkml.org/lkml/2016/10/26/1169
> 
> Regards,
> Steve Twiss, Dialog Semiconductor Ltd.
> 
> 
>  .../devicetree/bindings/input/da9062-onkey.txt     | 45 ++++++++++++++--------
>  1 file changed, 30 insertions(+), 15 deletions(-)

Acked-by: Rob Herring <robh@xxxxxxxxxx>