Re: [v16, 0/7] Fix eSDHC host version register bug

From: Scott Wood
Date: Wed Nov 09 2016 - 22:55:46 EST


On Wed, 2016-11-09 at 19:27 +0100, Ulf Hansson wrote:
> - i2c-list
>
> On 9 November 2016 at 04:14, Yangbo Lu <yangbo.lu@xxxxxxx> wrote:
> >
> > This patchset is used to fix a host version register bug in the T4240-
> > R1.0-R2.0
> > eSDHC controller. To match the SoC version and revision, 15 previous
> > version
> > patchsets had tried many methods but all of them were rejected by
> > reviewers.
> > Such as
> > ÂÂÂÂÂÂÂÂ- dts compatible method
> > ÂÂÂÂÂÂÂÂ- syscon method
> > ÂÂÂÂÂÂÂÂ- ifdef PPC method
> > ÂÂÂÂÂÂÂÂ- GUTS driver getting SVR method
> > Anrd suggested a soc_device_match method in v10, and this is the only
> > available
> > method left now. This v11 patchset introduces the soc_device_match
> > interface in
> > soc driver.
> >
> > The first four patches of Yangbo are to add the GUTS driver. This is used
> > to
> > register a soc device which contain soc version and revision information.
> > The other three patches introduce the soc_device_match method in soc
> > driver
> > and apply it on esdhc driver to fix this bug.
> >
> > ---
> > Changes for v15:
> > ÂÂÂÂÂÂÂÂ- Dropped patch 'dt: bindings: update Freescale DCFG compatible'
> > ÂÂÂÂÂÂÂÂÂÂsince the work had been done by below patch on ShawnGuo's linux
> > tree.
> > ÂÂÂÂÂÂÂÂÂÂ'dt-bindings: fsl: add LS1043A/LS1046A/LS2080A compatible for
> > SCFG
> > ÂÂÂÂÂÂÂÂÂÂÂand DCFG'
> > ÂÂÂÂÂÂÂÂ- Fixed error code issue in guts driver
> > Changes for v16:
> > ÂÂÂÂÂÂÂÂ- Dropped patch 'powerpc/fsl: move mpc85xx.h to include/linux/fsl'
> > ÂÂÂÂÂÂÂÂ- Added a bug-fix patch from Geert
> > ---
> >
> > Arnd Bergmann (1):
> > Â base: soc: introduce soc_device_match() interface
> >
> > Geert Uytterhoeven (1):
> > Â base: soc: Check for NULL SoC device attributes
> >
> > Yangbo Lu (5):
> > Â ARM64: dts: ls2080a: add device configuration node
> > Â dt: bindings: move guts devicetree doc out of powerpc directory
> > Â soc: fsl: add GUTS driver for QorIQ platforms
> > Â MAINTAINERS: add entry for Freescale SoC drivers
> > Â mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
> >
> > Â.../bindings/{powerpc => soc}/fsl/guts.txtÂÂÂÂÂÂÂÂÂ|ÂÂÂ3 +
> > ÂMAINTAINERSÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂ11 +-
> > Âarch/arm64/boot/dts/freescale/fsl-ls2080a.dtsiÂÂÂÂÂ|ÂÂÂ6 +
> > Âdrivers/base/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂÂ1 +
> > Âdrivers/base/soc.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂ70 ++++++
> > Âdrivers/mmc/host/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂÂ1 +
> > Âdrivers/mmc/host/sdhci-of-esdhc.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂ20 ++
> > Âdrivers/soc/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂÂ3 +-
> > Âdrivers/soc/fsl/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂ18 ++
> > Âdrivers/soc/fsl/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂÂ1 +
> > Âdrivers/soc/fsl/guts.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 236
> > +++++++++++++++++++++
> > Âinclude/linux/fsl/guts.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 125 ++++++-----
> > Âinclude/linux/sys_soc.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ|ÂÂÂ3 +
> > Â13 files changed, 447 insertions(+), 51 deletions(-)
> > Ârename Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt
> > (91%)
> > Âcreate mode 100644 drivers/soc/fsl/Kconfig
> > Âcreate mode 100644 drivers/soc/fsl/guts.c
> >
> > --
> > 2.1.0.27.g96db324
> >
> Thanks, applied on my mmc tree for next!
>
> I noticed that some DT compatibles weren't documented, according to
> checkpatch. Please fix that asap!

They are documented, in fsl/guts.txt (the file moved in patch 2/7):
> Â- compatible : Should define the compatible device type for
> ÂÂÂglobal-utilities.
> ÂÂÂPossible compatibles:
> ÂÂÂÂÂÂÂÂ"fsl,qoriq-device-config-1.0"
> ÂÂÂÂÂÂÂÂ"fsl,qoriq-device-config-2.0"
> ÂÂÂÂÂÂÂÂ"fsl,<chip>-device-config"
> ÂÂÂÂÂÂÂÂ"fsl,<chip>-guts"

Checkpatch doesn't understand compatibles defined in such a way.

-Scott