[PATCH v3 28/28] staging: iio: tsl2583: move out of staging
From: Brian Masney
Date: Thu Nov 10 2016 - 04:27:37 EST
Move tsl2580, tsl2581, tsl2583 driver out of staging into mainline.
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
.../ABI/testing/sysfs-bus-iio-light-tsl2583 | 20 +
drivers/iio/light/Kconfig | 7 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/tsl2583.c | 909 +++++++++++++++++++++
.../light/sysfs-bus-iio-light-tsl2583 | 20 -
drivers/staging/iio/light/Kconfig | 7 -
drivers/staging/iio/light/Makefile | 1 -
drivers/staging/iio/light/tsl2583.c | 909 ---------------------
8 files changed, 937 insertions(+), 937 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
create mode 100644 drivers/iio/light/tsl2583.c
delete mode 100644 drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
delete mode 100644 drivers/staging/iio/light/tsl2583.c
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583 b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
new file mode 100644
index 0000000..a2e1996
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
@@ -0,0 +1,20 @@
+What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate
+KernelVersion: 2.6.37
+Contact: linux-iio@xxxxxxxxxxxxxxx
+Description:
+ This property causes an internal calibration of the als gain trim
+ value which is later used in calculating illuminance in lux.
+
+What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table
+KernelVersion: 2.6.37
+Contact: linux-iio@xxxxxxxxxxxxxxx
+Description:
+ This property gets/sets the table of coefficients
+ used in calculating illuminance in lux.
+
+What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target
+KernelVersion: 2.6.37
+Contact: linux-iio@xxxxxxxxxxxxxxx
+Description:
+ This property is the known externally illuminance (in lux).
+ It is used in the process of calibrating the device accuracy.
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index d011720..298ea50 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -338,6 +338,13 @@ config SENSORS_TSL2563
This driver can also be built as a module. If so, the module
will be called tsl2563.
+config TSL2583
+ tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
+ depends on I2C
+ help
+ Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
+ Access ALS data via iio, sysfs.
+
config TSL4531
tristate "TAOS TSL4531 ambient light sensors"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 15f24c5..4de5200 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_SI1145) += si1145.o
obj-$(CONFIG_STK3310) += stk3310.o
obj-$(CONFIG_TCS3414) += tcs3414.o
obj-$(CONFIG_TCS3472) += tcs3472.o
+obj-$(CONFIG_TSL2583) += tsl2583.o
obj-$(CONFIG_TSL4531) += tsl4531.o
obj-$(CONFIG_US5182D) += us5182d.o
obj-$(CONFIG_VCNL4000) += vcnl4000.o
diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
new file mode 100644
index 0000000..b6da79b
--- /dev/null
+++ b/drivers/iio/light/tsl2583.c
@@ -0,0 +1,909 @@
+/*
+ * Device driver for monitoring ambient light intensity (lux)
+ * within the TAOS tsl258x family of devices (tsl2580, tsl2581, tsl2583).
+ *
+ * Copyright (c) 2011, TAOS Corporation.
+ * Copyright (c) 2016 Brian Masney <masneyb@xxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Device Registers and Masks */
+#define TSL2583_CNTRL 0x00
+#define TSL2583_ALS_TIME 0X01
+#define TSL2583_INTERRUPT 0x02
+#define TSL2583_GAIN 0x07
+#define TSL2583_REVID 0x11
+#define TSL2583_CHIPID 0x12
+#define TSL2583_ALS_CHAN0LO 0x14
+#define TSL2583_ALS_CHAN0HI 0x15
+#define TSL2583_ALS_CHAN1LO 0x16
+#define TSL2583_ALS_CHAN1HI 0x17
+#define TSL2583_TMR_LO 0x18
+#define TSL2583_TMR_HI 0x19
+
+/* tsl2583 cmd reg masks */
+#define TSL2583_CMD_REG 0x80
+#define TSL2583_CMD_SPL_FN 0x60
+#define TSL2583_CMD_ALS_INT_CLR 0x01
+
+/* tsl2583 cntrl reg masks */
+#define TSL2583_CNTL_ADC_ENBL 0x02
+#define TSL2583_CNTL_PWR_OFF 0x00
+#define TSL2583_CNTL_PWR_ON 0x01
+
+/* tsl2583 status reg masks */
+#define TSL2583_STA_ADC_VALID 0x01
+#define TSL2583_STA_ADC_INTR 0x10
+
+/* Lux calculation constants */
+#define TSL2583_LUX_CALC_OVER_FLOW 65535
+
+#define TSL2583_INTERRUPT_DISABLED 0x00
+
+#define TSL2583_CHIP_ID 0x90
+#define TSL2583_CHIP_ID_MASK 0xf0
+
+/* Per-device data */
+struct tsl2583_als_info {
+ u16 als_ch0;
+ u16 als_ch1;
+ u16 lux;
+};
+
+struct tsl2583_lux {
+ unsigned int ratio;
+ unsigned int ch0;
+ unsigned int ch1;
+};
+
+static const struct tsl2583_lux tsl2583_default_lux[] = {
+ { 9830, 8520, 15729 },
+ { 12452, 10807, 23344 },
+ { 14746, 6383, 11705 },
+ { 17695, 4063, 6554 },
+ { 0, 0, 0 } /* Termination segment */
+};
+
+#define TSL2583_MAX_LUX_TABLE_ENTRIES 11
+
+struct tsl2583_settings {
+ int als_time;
+ int als_gain;
+ int als_gain_trim;
+ int als_cal_target;
+
+ /*
+ * This structure is intentionally large to accommodate updates via
+ * sysfs. Sized to 11 = max 10 segments + 1 termination segment.
+ * Assumption is that one and only one type of glass used.
+ */
+ struct tsl2583_lux als_device_lux[TSL2583_MAX_LUX_TABLE_ENTRIES];
+};
+
+struct tsl2583_chip {
+ struct mutex als_mutex;
+ struct i2c_client *client;
+ struct tsl2583_als_info als_cur_info;
+ struct tsl2583_settings als_settings;
+ int als_time_scale;
+ int als_saturation;
+ bool suspended;
+};
+
+struct gainadj {
+ s16 ch0;
+ s16 ch1;
+ s16 mean;
+};
+
+/* Index = (0 - 3) Used to validate the gain selection index */
+static const struct gainadj gainadj[] = {
+ { 1, 1, 1 },
+ { 8, 8, 8 },
+ { 16, 16, 16 },
+ { 107, 115, 111 }
+};
+
+/*
+ * Provides initial operational parameter defaults.
+ * These defaults may be changed through the device's sysfs files.
+ */
+static void tsl2583_defaults(struct tsl2583_chip *chip)
+{
+ /*
+ * The integration time must be a multiple of 50ms and within the
+ * range [50, 600] ms.
+ */
+ chip->als_settings.als_time = 100;
+
+ /*
+ * This is an index into the gainadj table. Assume clear glass as the
+ * default.
+ */
+ chip->als_settings.als_gain = 0;
+
+ /* Default gain trim to account for aperture effects */
+ chip->als_settings.als_gain_trim = 1000;
+
+ /* Known external ALS reading used for calibration */
+ chip->als_settings.als_cal_target = 130;
+
+ /* Default lux table. */
+ memcpy(chip->als_settings.als_device_lux, tsl2583_default_lux,
+ sizeof(tsl2583_default_lux));
+}
+
+/*
+ * Reads and calculates current lux value.
+ * The raw ch0 and ch1 values of the ambient light sensed in the last
+ * integration cycle are read from the device.
+ * Time scale factor array values are adjusted based on the integration time.
+ * The raw values are multiplied by a scale factor, and device gain is obtained
+ * using gain index. Limit checks are done next, then the ratio of a multiple
+ * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[]
+ * declared above is then scanned to find the first ratio value that is just
+ * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
+ * the array are then used along with the time scale factor array values, to
+ * calculate the lux.
+ */
+static int tsl2583_get_lux(struct iio_dev *indio_dev)
+{
+ u16 ch0, ch1; /* separated ch0/ch1 data from device */
+ u32 lux; /* raw lux calculated from device data */
+ u64 lux64;
+ u32 ratio;
+ u8 buf[5];
+ struct tsl2583_lux *p;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int i, ret;
+
+ ret = i2c_smbus_read_byte_data(chip->client, TSL2583_CMD_REG);
+ if (ret < 0) {
+ dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n",
+ __func__);
+ goto done;
+ }
+
+ /* is data new & valid */
+ if (!(ret & TSL2583_STA_ADC_INTR)) {
+ dev_err(&chip->client->dev, "%s: data not valid; returning last value\n",
+ __func__);
+ ret = chip->als_cur_info.lux; /* return LAST VALUE */
+ goto done;
+ }
+
+ for (i = 0; i < 4; i++) {
+ int reg = TSL2583_CMD_REG | (TSL2583_ALS_CHAN0LO + i);
+
+ ret = i2c_smbus_read_byte_data(chip->client, reg);
+ if (ret < 0) {
+ dev_err(&chip->client->dev, "%s: failed to read register %x\n",
+ __func__, reg);
+ goto done;
+ }
+ buf[i] = ret;
+ }
+
+ /*
+ * Clear the pending interrupt status bit on the chip to allow the next
+ * integration cycle to start. This has to be done even though this
+ * driver currently does not support interrupts.
+ */
+ ret = i2c_smbus_write_byte(chip->client,
+ (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN |
+ TSL2583_CMD_ALS_INT_CLR));
+ if (ret < 0) {
+ dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n",
+ __func__);
+ goto done; /* have no data, so return failure */
+ }
+
+ /* extract ALS/lux data */
+ ch0 = le16_to_cpup((const __le16 *)&buf[0]);
+ ch1 = le16_to_cpup((const __le16 *)&buf[2]);
+
+ chip->als_cur_info.als_ch0 = ch0;
+ chip->als_cur_info.als_ch1 = ch1;
+
+ if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation))
+ goto return_max;
+
+ if (!ch0) {
+ /* have no data, so return 0 */
+ ret = 0;
+ chip->als_cur_info.lux = 0;
+ goto done;
+ }
+
+ /* calculate ratio */
+ ratio = (ch1 << 15) / ch0;
+
+ /* convert to unscaled lux using the pointer to the table */
+ for (p = (struct tsl2583_lux *)chip->als_settings.als_device_lux;
+ p->ratio != 0 && p->ratio < ratio; p++)
+ ;
+
+ if (p->ratio == 0) {
+ lux = 0;
+ } else {
+ u32 ch0lux, ch1lux;
+
+ ch0lux = ((ch0 * p->ch0) +
+ (gainadj[chip->als_settings.als_gain].ch0 >> 1))
+ / gainadj[chip->als_settings.als_gain].ch0;
+ ch1lux = ((ch1 * p->ch1) +
+ (gainadj[chip->als_settings.als_gain].ch1 >> 1))
+ / gainadj[chip->als_settings.als_gain].ch1;
+
+ /* note: lux is 31 bit max at this point */
+ if (ch1lux > ch0lux) {
+ dev_dbg(&chip->client->dev, "%s: No Data - Returning 0\n",
+ __func__);
+ ret = 0;
+ chip->als_cur_info.lux = 0;
+ goto done;
+ }
+
+ lux = ch0lux - ch1lux;
+ }
+
+ /* adjust for active time scale */
+ if (chip->als_time_scale == 0)
+ lux = 0;
+ else
+ lux = (lux + (chip->als_time_scale >> 1)) /
+ chip->als_time_scale;
+
+ /*
+ * Adjust for active gain scale.
+ * The tsl2583_default_lux tables above have a factor of 8192 built in,
+ * so we need to shift right.
+ * User-specified gain provides a multiplier.
+ * Apply user-specified gain before shifting right to retain precision.
+ * Use 64 bits to avoid overflow on multiplication.
+ * Then go back to 32 bits before division to avoid using div_u64().
+ */
+ lux64 = lux;
+ lux64 = lux64 * chip->als_settings.als_gain_trim;
+ lux64 >>= 13;
+ lux = lux64;
+ lux = (lux + 500) / 1000;
+
+ if (lux > TSL2583_LUX_CALC_OVER_FLOW) { /* check for overflow */
+return_max:
+ lux = TSL2583_LUX_CALC_OVER_FLOW;
+ }
+
+ /* Update the structure with the latest VALID lux. */
+ chip->als_cur_info.lux = lux;
+ ret = lux;
+
+done:
+ return ret;
+}
+
+/*
+ * Obtain single reading and calculate the als_gain_trim (later used
+ * to derive actual lux).
+ * Return updated gain_trim value.
+ */
+static int tsl2583_als_calibrate(struct iio_dev *indio_dev)
+{
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ unsigned int gain_trim_val;
+ int ret;
+ int lux_val;
+
+ ret = i2c_smbus_read_byte_data(chip->client,
+ TSL2583_CMD_REG | TSL2583_CNTRL);
+ if (ret < 0) {
+ dev_err(&chip->client->dev,
+ "%s: failed to read from the CNTRL register\n",
+ __func__);
+ return ret;
+ }
+
+ if ((ret & (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON))
+ != (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) {
+ dev_err(&chip->client->dev,
+ "%s: Device is not powered on and/or ADC is not enabled\n",
+ __func__);
+ return -EINVAL;
+ } else if ((ret & TSL2583_STA_ADC_VALID) != TSL2583_STA_ADC_VALID) {
+ dev_err(&chip->client->dev,
+ "%s: The two ADC channels have not completed an integration cycle\n",
+ __func__);
+ return -ENODATA;
+ }
+
+ lux_val = tsl2583_get_lux(indio_dev);
+ if (lux_val < 0) {
+ dev_err(&chip->client->dev, "%s: failed to get lux\n",
+ __func__);
+ return lux_val;
+ }
+
+ gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
+ * chip->als_settings.als_gain_trim) / lux_val);
+ if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
+ dev_err(&chip->client->dev,
+ "%s: trim_val of %d is not within the range [250, 4000]\n",
+ __func__, gain_trim_val);
+ return -ENODATA;
+ }
+
+ chip->als_settings.als_gain_trim = (int)gain_trim_val;
+
+ return 0;
+}
+
+static int tsl2583_set_als_time(struct tsl2583_chip *chip)
+{
+ int als_count, als_time, ret;
+ u8 val;
+
+ /* determine als integration register */
+ als_count = (chip->als_settings.als_time * 100 + 135) / 270;
+ if (!als_count)
+ als_count = 1; /* ensure at least one cycle */
+
+ /* convert back to time (encompasses overrides) */
+ als_time = (als_count * 27 + 5) / 10;
+
+ val = 256 - als_count;
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2583_CMD_REG | TSL2583_ALS_TIME,
+ val);
+ if (ret < 0) {
+ dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n",
+ __func__, val);
+ return ret;
+ }
+
+ /* set chip struct re scaling and saturation */
+ chip->als_saturation = als_count * 922; /* 90% of full scale */
+ chip->als_time_scale = (als_time + 25) / 50;
+
+ return ret;
+}
+
+static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
+{
+ int ret;
+
+ /* Set the gain based on als_settings struct */
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2583_CMD_REG | TSL2583_GAIN,
+ chip->als_settings.als_gain);
+ if (ret < 0)
+ dev_err(&chip->client->dev,
+ "%s: failed to set the gain to %d\n", __func__,
+ chip->als_settings.als_gain);
+
+ return ret;
+}
+
+static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2583_CMD_REG | TSL2583_CNTRL, state);
+ if (ret < 0)
+ dev_err(&chip->client->dev,
+ "%s: failed to set the power state to %d\n", __func__,
+ state);
+
+ return ret;
+}
+
+/*
+ * Turn the device on.
+ * Configuration must be set before calling this function.
+ */
+static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
+{
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ /* Power on the device; ADC off. */
+ ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2583_CMD_REG | TSL2583_INTERRUPT,
+ TSL2583_INTERRUPT_DISABLED);
+ if (ret < 0) {
+ dev_err(&chip->client->dev,
+ "%s: failed to disable interrupts\n", __func__);
+ return ret;
+ }
+
+ ret = tsl2583_set_als_time(chip);
+ if (ret < 0)
+ return ret;
+
+ ret = tsl2583_set_als_gain(chip);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(3000, 3500);
+
+ ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON |
+ TSL2583_CNTL_ADC_ENBL);
+ if (ret < 0)
+ return ret;
+
+ chip->suspended = false;
+
+ return ret;
+}
+
+/* Sysfs Interface Functions */
+
+static ssize_t in_illuminance_input_target_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&chip->als_mutex);
+ ret = sprintf(buf, "%d\n", chip->als_settings.als_cal_target);
+ mutex_unlock(&chip->als_mutex);
+
+ return ret;
+}
+
+static ssize_t in_illuminance_input_target_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int value;
+
+ if (kstrtoint(buf, 0, &value) || !value)
+ return -EINVAL;
+
+ mutex_lock(&chip->als_mutex);
+ chip->als_settings.als_cal_target = value;
+ mutex_unlock(&chip->als_mutex);
+
+ return len;
+}
+
+static ssize_t in_illuminance_calibrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int value, ret;
+
+ if (kstrtoint(buf, 0, &value) || value != 1)
+ return -EINVAL;
+
+ mutex_lock(&chip->als_mutex);
+
+ if (chip->suspended) {
+ ret = -EBUSY;
+ goto done;
+ }
+
+ ret = tsl2583_als_calibrate(indio_dev);
+ if (ret < 0)
+ goto done;
+
+ ret = len;
+done:
+ mutex_unlock(&chip->als_mutex);
+
+ return ret;
+}
+
+static ssize_t in_illuminance_lux_table_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ unsigned int i;
+ int offset = 0;
+
+ for (i = 0; i < ARRAY_SIZE(chip->als_settings.als_device_lux); i++) {
+ offset += sprintf(buf + offset, "%u,%u,%u,",
+ chip->als_settings.als_device_lux[i].ratio,
+ chip->als_settings.als_device_lux[i].ch0,
+ chip->als_settings.als_device_lux[i].ch1);
+ if (chip->als_settings.als_device_lux[i].ratio == 0) {
+ /*
+ * We just printed the first "0" entry.
+ * Now get rid of the extra "," and break.
+ */
+ offset--;
+ break;
+ }
+ }
+
+ offset += sprintf(buf + offset, "\n");
+
+ return offset;
+}
+
+static ssize_t in_illuminance_lux_table_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
+ int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
+ int ret = -EINVAL;
+ unsigned int n;
+
+ mutex_lock(&chip->als_mutex);
+
+ get_options(buf, ARRAY_SIZE(value), value);
+
+ /*
+ * We now have an array of ints starting at value[1], and
+ * enumerated by value[0].
+ * We expect each group of three ints is one table entry,
+ * and the last table entry is all 0.
+ */
+ n = value[0];
+ if ((n % 3) || n < 6 || n > max_ints) {
+ dev_err(dev,
+ "%s: The number of entries in the lux table must be a multiple of 3 and within the range [6, %d]\n",
+ __func__, max_ints);
+ goto done;
+ }
+ if ((value[n - 2] | value[n - 1] | value[n]) != 0) {
+ dev_err(dev, "%s: The last 3 entries in the lux table must be zeros.\n",
+ __func__);
+ goto done;
+ }
+
+ memcpy(chip->als_settings.als_device_lux, &value[1],
+ value[0] * sizeof(unsigned int));
+
+ ret = len;
+
+done:
+ mutex_unlock(&chip->als_mutex);
+
+ return ret;
+}
+
+static IIO_CONST_ATTR(in_illuminance_calibscale_available, "1 8 16 111");
+static IIO_CONST_ATTR(in_illuminance_integration_time_available,
+ "0.000050 0.000100 0.000150 0.000200 0.000250 0.000300 0.000350 0.000400 0.000450 0.000500 0.000550 0.000600 0.000650");
+static IIO_DEVICE_ATTR_RW(in_illuminance_input_target, 0);
+static IIO_DEVICE_ATTR_WO(in_illuminance_calibrate, 0);
+static IIO_DEVICE_ATTR_RW(in_illuminance_lux_table, 0);
+
+static struct attribute *sysfs_attrs_ctrl[] = {
+ &iio_const_attr_in_illuminance_calibscale_available.dev_attr.attr,
+ &iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
+ &iio_dev_attr_in_illuminance_input_target.dev_attr.attr,
+ &iio_dev_attr_in_illuminance_calibrate.dev_attr.attr,
+ &iio_dev_attr_in_illuminance_lux_table.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group tsl2583_attribute_group = {
+ .attrs = sysfs_attrs_ctrl,
+};
+
+static const struct iio_chan_spec tsl2583_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_IR,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ {
+ .type = IIO_LIGHT,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_BOTH,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_CALIBBIAS) |
+ BIT(IIO_CHAN_INFO_CALIBSCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ },
+};
+
+static int tsl2583_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&chip->als_mutex);
+
+ if (chip->suspended) {
+ ret = -EBUSY;
+ goto read_done;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (chan->type == IIO_LIGHT) {
+ ret = tsl2583_get_lux(indio_dev);
+ if (ret < 0)
+ goto read_done;
+
+ /*
+ * From page 20 of the TSL2581, TSL2583 data
+ * sheet (TAOS134 â MARCH 2011):
+ *
+ * One of the photodiodes (channel 0) is
+ * sensitive to both visible and infrared light,
+ * while the second photodiode (channel 1) is
+ * sensitive primarily to infrared light.
+ */
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
+ *val = chip->als_cur_info.als_ch0;
+ else
+ *val = chip->als_cur_info.als_ch1;
+
+ ret = IIO_VAL_INT;
+ }
+ break;
+ case IIO_CHAN_INFO_PROCESSED:
+ if (chan->type == IIO_LIGHT) {
+ ret = tsl2583_get_lux(indio_dev);
+ if (ret < 0)
+ goto read_done;
+
+ *val = ret;
+ ret = IIO_VAL_INT;
+ }
+ break;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (chan->type == IIO_LIGHT) {
+ *val = chip->als_settings.als_gain_trim;
+ ret = IIO_VAL_INT;
+ }
+ break;
+ case IIO_CHAN_INFO_CALIBSCALE:
+ if (chan->type == IIO_LIGHT) {
+ *val = gainadj[chip->als_settings.als_gain].mean;
+ ret = IIO_VAL_INT;
+ }
+ break;
+ case IIO_CHAN_INFO_INT_TIME:
+ if (chan->type == IIO_LIGHT) {
+ *val = 0;
+ *val2 = chip->als_settings.als_time;
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ }
+ break;
+ default:
+ break;
+ }
+
+read_done:
+ mutex_unlock(&chip->als_mutex);
+
+ return ret;
+}
+
+static int tsl2583_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&chip->als_mutex);
+
+ if (chip->suspended) {
+ ret = -EBUSY;
+ goto write_done;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (chan->type == IIO_LIGHT) {
+ chip->als_settings.als_gain_trim = val;
+ ret = 0;
+ }
+ break;
+ case IIO_CHAN_INFO_CALIBSCALE:
+ if (chan->type == IIO_LIGHT) {
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(gainadj); i++) {
+ if (gainadj[i].mean == val) {
+ chip->als_settings.als_gain = i;
+ ret = tsl2583_set_als_gain(chip);
+ break;
+ }
+ }
+ }
+ break;
+ case IIO_CHAN_INFO_INT_TIME:
+ if (chan->type == IIO_LIGHT && !val && val2 >= 50 &&
+ val2 <= 650 && !(val2 % 50)) {
+ chip->als_settings.als_time = val2;
+ ret = tsl2583_set_als_time(chip);
+ }
+ break;
+ default:
+ break;
+ }
+
+write_done:
+ mutex_unlock(&chip->als_mutex);
+
+ return ret;
+}
+
+static const struct iio_info tsl2583_info = {
+ .attrs = &tsl2583_attribute_group,
+ .driver_module = THIS_MODULE,
+ .read_raw = tsl2583_read_raw,
+ .write_raw = tsl2583_write_raw,
+};
+
+static int tsl2583_probe(struct i2c_client *clientp,
+ const struct i2c_device_id *idp)
+{
+ int ret;
+ struct tsl2583_chip *chip;
+ struct iio_dev *indio_dev;
+
+ if (!i2c_check_functionality(clientp->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&clientp->dev, "%s: i2c smbus byte data functionality is unsupported\n",
+ __func__);
+ return -EOPNOTSUPP;
+ }
+
+ indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ chip = iio_priv(indio_dev);
+ chip->client = clientp;
+ i2c_set_clientdata(clientp, indio_dev);
+
+ mutex_init(&chip->als_mutex);
+ chip->suspended = true;
+
+ ret = i2c_smbus_read_byte_data(clientp,
+ TSL2583_CMD_REG | TSL2583_CHIPID);
+ if (ret < 0) {
+ dev_err(&clientp->dev,
+ "%s: failed to read the chip ID register\n", __func__);
+ return ret;
+ }
+
+ if ((ret & TSL2583_CHIP_ID_MASK) != TSL2583_CHIP_ID) {
+ dev_err(&clientp->dev, "%s: received an unknown chip ID %x\n",
+ __func__, ret);
+ return -EINVAL;
+ }
+
+ indio_dev->info = &tsl2583_info;
+ indio_dev->channels = tsl2583_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
+ indio_dev->dev.parent = &clientp->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->name = chip->client->name;
+
+ ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+ if (ret) {
+ dev_err(&clientp->dev, "%s: iio registration failed\n",
+ __func__);
+ return ret;
+ }
+
+ /* Load up the V2 defaults (these are hard coded defaults for now) */
+ tsl2583_defaults(chip);
+
+ /* Make sure the chip is on */
+ ret = tsl2583_chip_init_and_power_on(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ dev_info(&clientp->dev, "Light sensor found.\n");
+
+ return 0;
+}
+
+static int __maybe_unused tsl2583_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&chip->als_mutex);
+
+ ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
+ chip->suspended = true;
+
+ mutex_unlock(&chip->als_mutex);
+
+ return ret;
+}
+
+static int __maybe_unused tsl2583_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&chip->als_mutex);
+
+ ret = tsl2583_chip_init_and_power_on(indio_dev);
+
+ mutex_unlock(&chip->als_mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(tsl2583_pm_ops, tsl2583_suspend, tsl2583_resume);
+
+static struct i2c_device_id tsl2583_idtable[] = {
+ { "tsl2580", 0 },
+ { "tsl2581", 1 },
+ { "tsl2583", 2 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, tsl2583_idtable);
+
+static const struct of_device_id tsl2583_of_match[] = {
+ { .compatible = "amstaos,tsl2580", },
+ { .compatible = "amstaos,tsl2581", },
+ { .compatible = "amstaos,tsl2583", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tsl2583_of_match);
+
+/* Driver definition */
+static struct i2c_driver tsl2583_driver = {
+ .driver = {
+ .name = "tsl2583",
+ .pm = &tsl2583_pm_ops,
+ .of_match_table = tsl2583_of_match,
+ },
+ .id_table = tsl2583_idtable,
+ .probe = tsl2583_probe,
+};
+module_i2c_driver(tsl2583_driver);
+
+MODULE_AUTHOR("J. August Brenner <jbrenner@xxxxxxxxxxx>");
+MODULE_AUTHOR("Brian Masney <masneyb@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
deleted file mode 100644
index a2e1996..0000000
--- a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
+++ /dev/null
@@ -1,20 +0,0 @@
-What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate
-KernelVersion: 2.6.37
-Contact: linux-iio@xxxxxxxxxxxxxxx
-Description:
- This property causes an internal calibration of the als gain trim
- value which is later used in calculating illuminance in lux.
-
-What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table
-KernelVersion: 2.6.37
-Contact: linux-iio@xxxxxxxxxxxxxxx
-Description:
- This property gets/sets the table of coefficients
- used in calculating illuminance in lux.
-
-What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target
-KernelVersion: 2.6.37
-Contact: linux-iio@xxxxxxxxxxxxxxx
-Description:
- This property is the known externally illuminance (in lux).
- It is used in the process of calibrating the device accuracy.
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index dbf22d3..4fbf629 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -13,13 +13,6 @@ config SENSORS_ISL29028
Proximity value via iio. The ISL29028 provides the concurrent sensing
of ambient light and proximity.
-config TSL2583
- tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
- depends on I2C
- help
- Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
- Access ALS data via iio, sysfs.
-
config TSL2x7x
tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
depends on I2C
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 6480856..f8693e9 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -3,5 +3,4 @@
#
obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
-obj-$(CONFIG_TSL2583) += tsl2583.o
obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
deleted file mode 100644
index b6da79b..0000000
--- a/drivers/staging/iio/light/tsl2583.c
+++ /dev/null
@@ -1,909 +0,0 @@
-/*
- * Device driver for monitoring ambient light intensity (lux)
- * within the TAOS tsl258x family of devices (tsl2580, tsl2581, tsl2583).
- *
- * Copyright (c) 2011, TAOS Corporation.
- * Copyright (c) 2016 Brian Masney <masneyb@xxxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/mutex.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-/* Device Registers and Masks */
-#define TSL2583_CNTRL 0x00
-#define TSL2583_ALS_TIME 0X01
-#define TSL2583_INTERRUPT 0x02
-#define TSL2583_GAIN 0x07
-#define TSL2583_REVID 0x11
-#define TSL2583_CHIPID 0x12
-#define TSL2583_ALS_CHAN0LO 0x14
-#define TSL2583_ALS_CHAN0HI 0x15
-#define TSL2583_ALS_CHAN1LO 0x16
-#define TSL2583_ALS_CHAN1HI 0x17
-#define TSL2583_TMR_LO 0x18
-#define TSL2583_TMR_HI 0x19
-
-/* tsl2583 cmd reg masks */
-#define TSL2583_CMD_REG 0x80
-#define TSL2583_CMD_SPL_FN 0x60
-#define TSL2583_CMD_ALS_INT_CLR 0x01
-
-/* tsl2583 cntrl reg masks */
-#define TSL2583_CNTL_ADC_ENBL 0x02
-#define TSL2583_CNTL_PWR_OFF 0x00
-#define TSL2583_CNTL_PWR_ON 0x01
-
-/* tsl2583 status reg masks */
-#define TSL2583_STA_ADC_VALID 0x01
-#define TSL2583_STA_ADC_INTR 0x10
-
-/* Lux calculation constants */
-#define TSL2583_LUX_CALC_OVER_FLOW 65535
-
-#define TSL2583_INTERRUPT_DISABLED 0x00
-
-#define TSL2583_CHIP_ID 0x90
-#define TSL2583_CHIP_ID_MASK 0xf0
-
-/* Per-device data */
-struct tsl2583_als_info {
- u16 als_ch0;
- u16 als_ch1;
- u16 lux;
-};
-
-struct tsl2583_lux {
- unsigned int ratio;
- unsigned int ch0;
- unsigned int ch1;
-};
-
-static const struct tsl2583_lux tsl2583_default_lux[] = {
- { 9830, 8520, 15729 },
- { 12452, 10807, 23344 },
- { 14746, 6383, 11705 },
- { 17695, 4063, 6554 },
- { 0, 0, 0 } /* Termination segment */
-};
-
-#define TSL2583_MAX_LUX_TABLE_ENTRIES 11
-
-struct tsl2583_settings {
- int als_time;
- int als_gain;
- int als_gain_trim;
- int als_cal_target;
-
- /*
- * This structure is intentionally large to accommodate updates via
- * sysfs. Sized to 11 = max 10 segments + 1 termination segment.
- * Assumption is that one and only one type of glass used.
- */
- struct tsl2583_lux als_device_lux[TSL2583_MAX_LUX_TABLE_ENTRIES];
-};
-
-struct tsl2583_chip {
- struct mutex als_mutex;
- struct i2c_client *client;
- struct tsl2583_als_info als_cur_info;
- struct tsl2583_settings als_settings;
- int als_time_scale;
- int als_saturation;
- bool suspended;
-};
-
-struct gainadj {
- s16 ch0;
- s16 ch1;
- s16 mean;
-};
-
-/* Index = (0 - 3) Used to validate the gain selection index */
-static const struct gainadj gainadj[] = {
- { 1, 1, 1 },
- { 8, 8, 8 },
- { 16, 16, 16 },
- { 107, 115, 111 }
-};
-
-/*
- * Provides initial operational parameter defaults.
- * These defaults may be changed through the device's sysfs files.
- */
-static void tsl2583_defaults(struct tsl2583_chip *chip)
-{
- /*
- * The integration time must be a multiple of 50ms and within the
- * range [50, 600] ms.
- */
- chip->als_settings.als_time = 100;
-
- /*
- * This is an index into the gainadj table. Assume clear glass as the
- * default.
- */
- chip->als_settings.als_gain = 0;
-
- /* Default gain trim to account for aperture effects */
- chip->als_settings.als_gain_trim = 1000;
-
- /* Known external ALS reading used for calibration */
- chip->als_settings.als_cal_target = 130;
-
- /* Default lux table. */
- memcpy(chip->als_settings.als_device_lux, tsl2583_default_lux,
- sizeof(tsl2583_default_lux));
-}
-
-/*
- * Reads and calculates current lux value.
- * The raw ch0 and ch1 values of the ambient light sensed in the last
- * integration cycle are read from the device.
- * Time scale factor array values are adjusted based on the integration time.
- * The raw values are multiplied by a scale factor, and device gain is obtained
- * using gain index. Limit checks are done next, then the ratio of a multiple
- * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[]
- * declared above is then scanned to find the first ratio value that is just
- * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
- * the array are then used along with the time scale factor array values, to
- * calculate the lux.
- */
-static int tsl2583_get_lux(struct iio_dev *indio_dev)
-{
- u16 ch0, ch1; /* separated ch0/ch1 data from device */
- u32 lux; /* raw lux calculated from device data */
- u64 lux64;
- u32 ratio;
- u8 buf[5];
- struct tsl2583_lux *p;
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int i, ret;
-
- ret = i2c_smbus_read_byte_data(chip->client, TSL2583_CMD_REG);
- if (ret < 0) {
- dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n",
- __func__);
- goto done;
- }
-
- /* is data new & valid */
- if (!(ret & TSL2583_STA_ADC_INTR)) {
- dev_err(&chip->client->dev, "%s: data not valid; returning last value\n",
- __func__);
- ret = chip->als_cur_info.lux; /* return LAST VALUE */
- goto done;
- }
-
- for (i = 0; i < 4; i++) {
- int reg = TSL2583_CMD_REG | (TSL2583_ALS_CHAN0LO + i);
-
- ret = i2c_smbus_read_byte_data(chip->client, reg);
- if (ret < 0) {
- dev_err(&chip->client->dev, "%s: failed to read register %x\n",
- __func__, reg);
- goto done;
- }
- buf[i] = ret;
- }
-
- /*
- * Clear the pending interrupt status bit on the chip to allow the next
- * integration cycle to start. This has to be done even though this
- * driver currently does not support interrupts.
- */
- ret = i2c_smbus_write_byte(chip->client,
- (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN |
- TSL2583_CMD_ALS_INT_CLR));
- if (ret < 0) {
- dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n",
- __func__);
- goto done; /* have no data, so return failure */
- }
-
- /* extract ALS/lux data */
- ch0 = le16_to_cpup((const __le16 *)&buf[0]);
- ch1 = le16_to_cpup((const __le16 *)&buf[2]);
-
- chip->als_cur_info.als_ch0 = ch0;
- chip->als_cur_info.als_ch1 = ch1;
-
- if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation))
- goto return_max;
-
- if (!ch0) {
- /* have no data, so return 0 */
- ret = 0;
- chip->als_cur_info.lux = 0;
- goto done;
- }
-
- /* calculate ratio */
- ratio = (ch1 << 15) / ch0;
-
- /* convert to unscaled lux using the pointer to the table */
- for (p = (struct tsl2583_lux *)chip->als_settings.als_device_lux;
- p->ratio != 0 && p->ratio < ratio; p++)
- ;
-
- if (p->ratio == 0) {
- lux = 0;
- } else {
- u32 ch0lux, ch1lux;
-
- ch0lux = ((ch0 * p->ch0) +
- (gainadj[chip->als_settings.als_gain].ch0 >> 1))
- / gainadj[chip->als_settings.als_gain].ch0;
- ch1lux = ((ch1 * p->ch1) +
- (gainadj[chip->als_settings.als_gain].ch1 >> 1))
- / gainadj[chip->als_settings.als_gain].ch1;
-
- /* note: lux is 31 bit max at this point */
- if (ch1lux > ch0lux) {
- dev_dbg(&chip->client->dev, "%s: No Data - Returning 0\n",
- __func__);
- ret = 0;
- chip->als_cur_info.lux = 0;
- goto done;
- }
-
- lux = ch0lux - ch1lux;
- }
-
- /* adjust for active time scale */
- if (chip->als_time_scale == 0)
- lux = 0;
- else
- lux = (lux + (chip->als_time_scale >> 1)) /
- chip->als_time_scale;
-
- /*
- * Adjust for active gain scale.
- * The tsl2583_default_lux tables above have a factor of 8192 built in,
- * so we need to shift right.
- * User-specified gain provides a multiplier.
- * Apply user-specified gain before shifting right to retain precision.
- * Use 64 bits to avoid overflow on multiplication.
- * Then go back to 32 bits before division to avoid using div_u64().
- */
- lux64 = lux;
- lux64 = lux64 * chip->als_settings.als_gain_trim;
- lux64 >>= 13;
- lux = lux64;
- lux = (lux + 500) / 1000;
-
- if (lux > TSL2583_LUX_CALC_OVER_FLOW) { /* check for overflow */
-return_max:
- lux = TSL2583_LUX_CALC_OVER_FLOW;
- }
-
- /* Update the structure with the latest VALID lux. */
- chip->als_cur_info.lux = lux;
- ret = lux;
-
-done:
- return ret;
-}
-
-/*
- * Obtain single reading and calculate the als_gain_trim (later used
- * to derive actual lux).
- * Return updated gain_trim value.
- */
-static int tsl2583_als_calibrate(struct iio_dev *indio_dev)
-{
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- unsigned int gain_trim_val;
- int ret;
- int lux_val;
-
- ret = i2c_smbus_read_byte_data(chip->client,
- TSL2583_CMD_REG | TSL2583_CNTRL);
- if (ret < 0) {
- dev_err(&chip->client->dev,
- "%s: failed to read from the CNTRL register\n",
- __func__);
- return ret;
- }
-
- if ((ret & (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON))
- != (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) {
- dev_err(&chip->client->dev,
- "%s: Device is not powered on and/or ADC is not enabled\n",
- __func__);
- return -EINVAL;
- } else if ((ret & TSL2583_STA_ADC_VALID) != TSL2583_STA_ADC_VALID) {
- dev_err(&chip->client->dev,
- "%s: The two ADC channels have not completed an integration cycle\n",
- __func__);
- return -ENODATA;
- }
-
- lux_val = tsl2583_get_lux(indio_dev);
- if (lux_val < 0) {
- dev_err(&chip->client->dev, "%s: failed to get lux\n",
- __func__);
- return lux_val;
- }
-
- gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
- * chip->als_settings.als_gain_trim) / lux_val);
- if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
- dev_err(&chip->client->dev,
- "%s: trim_val of %d is not within the range [250, 4000]\n",
- __func__, gain_trim_val);
- return -ENODATA;
- }
-
- chip->als_settings.als_gain_trim = (int)gain_trim_val;
-
- return 0;
-}
-
-static int tsl2583_set_als_time(struct tsl2583_chip *chip)
-{
- int als_count, als_time, ret;
- u8 val;
-
- /* determine als integration register */
- als_count = (chip->als_settings.als_time * 100 + 135) / 270;
- if (!als_count)
- als_count = 1; /* ensure at least one cycle */
-
- /* convert back to time (encompasses overrides) */
- als_time = (als_count * 27 + 5) / 10;
-
- val = 256 - als_count;
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2583_CMD_REG | TSL2583_ALS_TIME,
- val);
- if (ret < 0) {
- dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n",
- __func__, val);
- return ret;
- }
-
- /* set chip struct re scaling and saturation */
- chip->als_saturation = als_count * 922; /* 90% of full scale */
- chip->als_time_scale = (als_time + 25) / 50;
-
- return ret;
-}
-
-static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
-{
- int ret;
-
- /* Set the gain based on als_settings struct */
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2583_CMD_REG | TSL2583_GAIN,
- chip->als_settings.als_gain);
- if (ret < 0)
- dev_err(&chip->client->dev,
- "%s: failed to set the gain to %d\n", __func__,
- chip->als_settings.als_gain);
-
- return ret;
-}
-
-static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
-{
- int ret;
-
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2583_CMD_REG | TSL2583_CNTRL, state);
- if (ret < 0)
- dev_err(&chip->client->dev,
- "%s: failed to set the power state to %d\n", __func__,
- state);
-
- return ret;
-}
-
-/*
- * Turn the device on.
- * Configuration must be set before calling this function.
- */
-static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
-{
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int ret;
-
- /* Power on the device; ADC off. */
- ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON);
- if (ret < 0)
- return ret;
-
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2583_CMD_REG | TSL2583_INTERRUPT,
- TSL2583_INTERRUPT_DISABLED);
- if (ret < 0) {
- dev_err(&chip->client->dev,
- "%s: failed to disable interrupts\n", __func__);
- return ret;
- }
-
- ret = tsl2583_set_als_time(chip);
- if (ret < 0)
- return ret;
-
- ret = tsl2583_set_als_gain(chip);
- if (ret < 0)
- return ret;
-
- usleep_range(3000, 3500);
-
- ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON |
- TSL2583_CNTL_ADC_ENBL);
- if (ret < 0)
- return ret;
-
- chip->suspended = false;
-
- return ret;
-}
-
-/* Sysfs Interface Functions */
-
-static ssize_t in_illuminance_input_target_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int ret;
-
- mutex_lock(&chip->als_mutex);
- ret = sprintf(buf, "%d\n", chip->als_settings.als_cal_target);
- mutex_unlock(&chip->als_mutex);
-
- return ret;
-}
-
-static ssize_t in_illuminance_input_target_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int value;
-
- if (kstrtoint(buf, 0, &value) || !value)
- return -EINVAL;
-
- mutex_lock(&chip->als_mutex);
- chip->als_settings.als_cal_target = value;
- mutex_unlock(&chip->als_mutex);
-
- return len;
-}
-
-static ssize_t in_illuminance_calibrate_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int value, ret;
-
- if (kstrtoint(buf, 0, &value) || value != 1)
- return -EINVAL;
-
- mutex_lock(&chip->als_mutex);
-
- if (chip->suspended) {
- ret = -EBUSY;
- goto done;
- }
-
- ret = tsl2583_als_calibrate(indio_dev);
- if (ret < 0)
- goto done;
-
- ret = len;
-done:
- mutex_unlock(&chip->als_mutex);
-
- return ret;
-}
-
-static ssize_t in_illuminance_lux_table_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- unsigned int i;
- int offset = 0;
-
- for (i = 0; i < ARRAY_SIZE(chip->als_settings.als_device_lux); i++) {
- offset += sprintf(buf + offset, "%u,%u,%u,",
- chip->als_settings.als_device_lux[i].ratio,
- chip->als_settings.als_device_lux[i].ch0,
- chip->als_settings.als_device_lux[i].ch1);
- if (chip->als_settings.als_device_lux[i].ratio == 0) {
- /*
- * We just printed the first "0" entry.
- * Now get rid of the extra "," and break.
- */
- offset--;
- break;
- }
- }
-
- offset += sprintf(buf + offset, "\n");
-
- return offset;
-}
-
-static ssize_t in_illuminance_lux_table_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
- int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
- int ret = -EINVAL;
- unsigned int n;
-
- mutex_lock(&chip->als_mutex);
-
- get_options(buf, ARRAY_SIZE(value), value);
-
- /*
- * We now have an array of ints starting at value[1], and
- * enumerated by value[0].
- * We expect each group of three ints is one table entry,
- * and the last table entry is all 0.
- */
- n = value[0];
- if ((n % 3) || n < 6 || n > max_ints) {
- dev_err(dev,
- "%s: The number of entries in the lux table must be a multiple of 3 and within the range [6, %d]\n",
- __func__, max_ints);
- goto done;
- }
- if ((value[n - 2] | value[n - 1] | value[n]) != 0) {
- dev_err(dev, "%s: The last 3 entries in the lux table must be zeros.\n",
- __func__);
- goto done;
- }
-
- memcpy(chip->als_settings.als_device_lux, &value[1],
- value[0] * sizeof(unsigned int));
-
- ret = len;
-
-done:
- mutex_unlock(&chip->als_mutex);
-
- return ret;
-}
-
-static IIO_CONST_ATTR(in_illuminance_calibscale_available, "1 8 16 111");
-static IIO_CONST_ATTR(in_illuminance_integration_time_available,
- "0.000050 0.000100 0.000150 0.000200 0.000250 0.000300 0.000350 0.000400 0.000450 0.000500 0.000550 0.000600 0.000650");
-static IIO_DEVICE_ATTR_RW(in_illuminance_input_target, 0);
-static IIO_DEVICE_ATTR_WO(in_illuminance_calibrate, 0);
-static IIO_DEVICE_ATTR_RW(in_illuminance_lux_table, 0);
-
-static struct attribute *sysfs_attrs_ctrl[] = {
- &iio_const_attr_in_illuminance_calibscale_available.dev_attr.attr,
- &iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
- &iio_dev_attr_in_illuminance_input_target.dev_attr.attr,
- &iio_dev_attr_in_illuminance_calibrate.dev_attr.attr,
- &iio_dev_attr_in_illuminance_lux_table.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group tsl2583_attribute_group = {
- .attrs = sysfs_attrs_ctrl,
-};
-
-static const struct iio_chan_spec tsl2583_channels[] = {
- {
- .type = IIO_LIGHT,
- .modified = 1,
- .channel2 = IIO_MOD_LIGHT_IR,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- },
- {
- .type = IIO_LIGHT,
- .modified = 1,
- .channel2 = IIO_MOD_LIGHT_BOTH,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- },
- {
- .type = IIO_LIGHT,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
- BIT(IIO_CHAN_INFO_CALIBBIAS) |
- BIT(IIO_CHAN_INFO_CALIBSCALE) |
- BIT(IIO_CHAN_INFO_INT_TIME),
- },
-};
-
-static int tsl2583_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
-{
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int ret = -EINVAL;
-
- mutex_lock(&chip->als_mutex);
-
- if (chip->suspended) {
- ret = -EBUSY;
- goto read_done;
- }
-
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- if (chan->type == IIO_LIGHT) {
- ret = tsl2583_get_lux(indio_dev);
- if (ret < 0)
- goto read_done;
-
- /*
- * From page 20 of the TSL2581, TSL2583 data
- * sheet (TAOS134 â MARCH 2011):
- *
- * One of the photodiodes (channel 0) is
- * sensitive to both visible and infrared light,
- * while the second photodiode (channel 1) is
- * sensitive primarily to infrared light.
- */
- if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
- *val = chip->als_cur_info.als_ch0;
- else
- *val = chip->als_cur_info.als_ch1;
-
- ret = IIO_VAL_INT;
- }
- break;
- case IIO_CHAN_INFO_PROCESSED:
- if (chan->type == IIO_LIGHT) {
- ret = tsl2583_get_lux(indio_dev);
- if (ret < 0)
- goto read_done;
-
- *val = ret;
- ret = IIO_VAL_INT;
- }
- break;
- case IIO_CHAN_INFO_CALIBBIAS:
- if (chan->type == IIO_LIGHT) {
- *val = chip->als_settings.als_gain_trim;
- ret = IIO_VAL_INT;
- }
- break;
- case IIO_CHAN_INFO_CALIBSCALE:
- if (chan->type == IIO_LIGHT) {
- *val = gainadj[chip->als_settings.als_gain].mean;
- ret = IIO_VAL_INT;
- }
- break;
- case IIO_CHAN_INFO_INT_TIME:
- if (chan->type == IIO_LIGHT) {
- *val = 0;
- *val2 = chip->als_settings.als_time;
- ret = IIO_VAL_INT_PLUS_MICRO;
- }
- break;
- default:
- break;
- }
-
-read_done:
- mutex_unlock(&chip->als_mutex);
-
- return ret;
-}
-
-static int tsl2583_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val, int val2, long mask)
-{
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int ret = -EINVAL;
-
- mutex_lock(&chip->als_mutex);
-
- if (chip->suspended) {
- ret = -EBUSY;
- goto write_done;
- }
-
- switch (mask) {
- case IIO_CHAN_INFO_CALIBBIAS:
- if (chan->type == IIO_LIGHT) {
- chip->als_settings.als_gain_trim = val;
- ret = 0;
- }
- break;
- case IIO_CHAN_INFO_CALIBSCALE:
- if (chan->type == IIO_LIGHT) {
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(gainadj); i++) {
- if (gainadj[i].mean == val) {
- chip->als_settings.als_gain = i;
- ret = tsl2583_set_als_gain(chip);
- break;
- }
- }
- }
- break;
- case IIO_CHAN_INFO_INT_TIME:
- if (chan->type == IIO_LIGHT && !val && val2 >= 50 &&
- val2 <= 650 && !(val2 % 50)) {
- chip->als_settings.als_time = val2;
- ret = tsl2583_set_als_time(chip);
- }
- break;
- default:
- break;
- }
-
-write_done:
- mutex_unlock(&chip->als_mutex);
-
- return ret;
-}
-
-static const struct iio_info tsl2583_info = {
- .attrs = &tsl2583_attribute_group,
- .driver_module = THIS_MODULE,
- .read_raw = tsl2583_read_raw,
- .write_raw = tsl2583_write_raw,
-};
-
-static int tsl2583_probe(struct i2c_client *clientp,
- const struct i2c_device_id *idp)
-{
- int ret;
- struct tsl2583_chip *chip;
- struct iio_dev *indio_dev;
-
- if (!i2c_check_functionality(clientp->adapter,
- I2C_FUNC_SMBUS_BYTE_DATA)) {
- dev_err(&clientp->dev, "%s: i2c smbus byte data functionality is unsupported\n",
- __func__);
- return -EOPNOTSUPP;
- }
-
- indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
- if (!indio_dev)
- return -ENOMEM;
-
- chip = iio_priv(indio_dev);
- chip->client = clientp;
- i2c_set_clientdata(clientp, indio_dev);
-
- mutex_init(&chip->als_mutex);
- chip->suspended = true;
-
- ret = i2c_smbus_read_byte_data(clientp,
- TSL2583_CMD_REG | TSL2583_CHIPID);
- if (ret < 0) {
- dev_err(&clientp->dev,
- "%s: failed to read the chip ID register\n", __func__);
- return ret;
- }
-
- if ((ret & TSL2583_CHIP_ID_MASK) != TSL2583_CHIP_ID) {
- dev_err(&clientp->dev, "%s: received an unknown chip ID %x\n",
- __func__, ret);
- return -EINVAL;
- }
-
- indio_dev->info = &tsl2583_info;
- indio_dev->channels = tsl2583_channels;
- indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
- indio_dev->dev.parent = &clientp->dev;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->name = chip->client->name;
-
- ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
- if (ret) {
- dev_err(&clientp->dev, "%s: iio registration failed\n",
- __func__);
- return ret;
- }
-
- /* Load up the V2 defaults (these are hard coded defaults for now) */
- tsl2583_defaults(chip);
-
- /* Make sure the chip is on */
- ret = tsl2583_chip_init_and_power_on(indio_dev);
- if (ret < 0)
- return ret;
-
- dev_info(&clientp->dev, "Light sensor found.\n");
-
- return 0;
-}
-
-static int __maybe_unused tsl2583_suspend(struct device *dev)
-{
- struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int ret;
-
- mutex_lock(&chip->als_mutex);
-
- ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
- chip->suspended = true;
-
- mutex_unlock(&chip->als_mutex);
-
- return ret;
-}
-
-static int __maybe_unused tsl2583_resume(struct device *dev)
-{
- struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
- struct tsl2583_chip *chip = iio_priv(indio_dev);
- int ret;
-
- mutex_lock(&chip->als_mutex);
-
- ret = tsl2583_chip_init_and_power_on(indio_dev);
-
- mutex_unlock(&chip->als_mutex);
-
- return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(tsl2583_pm_ops, tsl2583_suspend, tsl2583_resume);
-
-static struct i2c_device_id tsl2583_idtable[] = {
- { "tsl2580", 0 },
- { "tsl2581", 1 },
- { "tsl2583", 2 },
- {}
-};
-MODULE_DEVICE_TABLE(i2c, tsl2583_idtable);
-
-static const struct of_device_id tsl2583_of_match[] = {
- { .compatible = "amstaos,tsl2580", },
- { .compatible = "amstaos,tsl2581", },
- { .compatible = "amstaos,tsl2583", },
- { },
-};
-MODULE_DEVICE_TABLE(of, tsl2583_of_match);
-
-/* Driver definition */
-static struct i2c_driver tsl2583_driver = {
- .driver = {
- .name = "tsl2583",
- .pm = &tsl2583_pm_ops,
- .of_match_table = tsl2583_of_match,
- },
- .id_table = tsl2583_idtable,
- .probe = tsl2583_probe,
-};
-module_i2c_driver(tsl2583_driver);
-
-MODULE_AUTHOR("J. August Brenner <jbrenner@xxxxxxxxxxx>");
-MODULE_AUTHOR("Brian Masney <masneyb@xxxxxxxxxxxxx>");
-MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver");
-MODULE_LICENSE("GPL");
--
2.7.4