Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD

[Marek Vasut]

On 11/15/2016 06:06 PM, Ksenija StanojeviÄ wrote:
> On Mon, Nov 14, 2016 at 7:43 PM, Marek Vasut <marex@xxxxxxx> wrote:
>> On 11/02/2016 08:38 AM, Ksenija Stanojevic wrote:
>>> Add core files for low resolution analog-to-digital converter (mxs-lradc)
>>> MFD driver.
>>>
>>> Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
>>> ---
>>> Changes in v9:
>>>  - improve commit message.
>>>
>>> Changes in v8:
>>>  - rebase onto 4.9-rc1
>>>
>>> Changes in v7:
>>>  - define macros ADC_CELL and TSC_CELL
>>>  - remove one cell and dynamically set them in the switch()
>>>  - fail in the touchscreen driver instead of mfd driver if
>>>    hardware doesn't contain a touchscreen
>>>
>>> Changes in v6:
>>>  - update copyright
>>>  - add kernel-doc header for struct mxs-lradc
>>>  - add error message
>>>  - change EINVAL to ENODEV
>>>  - use PLATFORM_DEVID_NONE instead -1
>>>  - cosmetic fixes
>>>
>>> Changes in v5:
>>>  - use DEFINE_RES_MEM
>>>  - don't pass ioreammaped adress to platform cells
>>>  - move comment outside of struct mxs_lradc
>>>  - change type of argument in mxs_lradc_reg_set, mxs_lradc_reg_clear,
>>>    mxs_lradc_reg_wrt (struct mxs_lradc * -> void __iomem *)
>>>
>>> Changes in v4:
>>>  - update copyright
>>>  - use DEFINE_RES_IRQ_NAMED
>>>  - remove mxs_lradc_add_device function
>>>  - use struct mfd_cell in static form
>>>  - improve spacing
>>>  - remove unnecessary comment
>>>  - remove platform_get_irq
>>>  - remove touch_ret and use ret instead
>>>  - rename use_touchscreen to touchscreen_wire
>>>  - use goto statements
>>>  - remove irq[13], irq_count and irq_name from struct mxs_lradc
>>>  - remove all defines from inside the struct definition
>>>
>>> Changes in v3:
>>>  - add note to commit message
>>>  - move switch statement into if(touch_ret == 0) branch
>>>  - add MODULE_AUTHOR
>>>
>>> Changes in v2:
>>>  - do not change spacing in Kconfig
>>>  - make struct mfd_cell part of struct mxs_lradc
>>>  - use switch instead of if in mxs_lradc_irq_mask
>>>  - use only necessary header files in mxs_lradc.h
>>>  - use devm_mfd_add_device
>>>  - use separate function to register mfd device
>>>  - change licence to GPL
>>>  - add copyright
>>>
>>>  drivers/mfd/Kconfig           |  17 +++
>>>  drivers/mfd/Makefile          |   1 +
>>>  drivers/mfd/mxs-lradc.c       | 249 ++++++++++++++++++++++++++++++++++++++++++
>>>  include/linux/mfd/mxs-lradc.h | 203 ++++++++++++++++++++++++++++++++++
>>>  4 files changed, 470 insertions(+)
>>>  create mode 100644 drivers/mfd/mxs-lradc.c
>>>  create mode 100644 include/linux/mfd/mxs-lradc.h
>>>
>>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>>> index c6df644..bdd88cf 100644
>>> --- a/drivers/mfd/Kconfig
>>> +++ b/drivers/mfd/Kconfig
>>> @@ -326,6 +326,23 @@ config MFD_MC13XXX_I2C
>>>       help
>>>         Select this if your MC13xxx is connected via an I2C bus.
>>>
>>> +config MFD_MXS_LRADC
>>> +     tristate "Freescale i.MX23/i.MX28 LRADC"
>>> +     depends on ARCH_MXS || COMPILE_TEST
>>> +     select MFD_CORE
>>> +     select STMP_DEVICE
>>> +     help
>>> +       Say yes here to build support for the Low Resolution
>>> +       Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28
>>> +       processors. This driver provides common support for accessing the
>>> +       device, additional drivers must be enabled in order to use the
>>> +       functionality of the device:
>>> +             mxs-lradc-adc for ADC readings
>>> +             mxs-lradc-ts  for touchscreen support
>>> +
>>> +       This driver can also be built as a module. If so, the module will be
>>> +       called mxs-lradc.
>>> +
>>>  config MFD_MX25_TSADC
>>>       tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
>>>       select REGMAP_MMIO
>>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>>> index 9834e66..057ca15 100644
>>> --- a/drivers/mfd/Makefile
>>> +++ b/drivers/mfd/Makefile
>>> @@ -211,3 +211,4 @@ obj-$(CONFIG_INTEL_SOC_PMIC)      += intel-soc-pmic.o
>>>  obj-$(CONFIG_MFD_MT6397)     += mt6397-core.o
>>>
>>>  obj-$(CONFIG_MFD_ALTERA_A10SR)       += altera-a10sr.o
>>> +obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
>>> diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c
>>> new file mode 100644
>>> index 0000000..ffc8f2e
>>> --- /dev/null
>>> +++ b/drivers/mfd/mxs-lradc.c
>>> @@ -0,0 +1,249 @@
>>> +/*
>>> + * Freescale MXS Low Resolution Analog-to-Digital Converter driver
>>> + *
>>> + * Copyright (c) 2012 DENX Software Engineering, GmbH.
>>> + * Copyright (c) 2016 Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
>>> + *
>>> + * Authors:
>>> + *  Marek Vasut <marex@xxxxxxx>
>>> + *  Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/device.h>
>>> +#include <linux/mfd/core.h>
>>> +#include <linux/mfd/mxs-lradc.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/slab.h>
>>> +
>>> +#define MXS_LRADC_BASE               0x80050000
>>
>> Just for my understanding, why is this hardware address hard-coded here?
>> Shouldn't that be fetched from DT ?
> 
> Do you mean that address should be fetched by using of_address_to_resource()
> in probe function, or something else?

Probably platform_get_resource() .

-- 
Best regards,
Marek Vasut