Re: [PATCH 3/4] DW DMAC: add hw-llp property to device tree

[Andy Shevchenko]

On Wed, 2016-11-16 at 16:56 +0300, Eugeniy Paltsev wrote:
> Several versions of DW DMAC have multi block transfers hardware
> support. Hardware support of multi block transfers is disabled
> by default if we use DT to configure DMAC and software emulation
> of multi block transfers used instead.
> Add hw-llp property, so it is possible to enable hardware
> multi block transfers (if present) via DT.

You forgot to explain the conversion from per device value to per
channel one.

> 
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> ---
> Âdrivers/dma/dw/core.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 2 +-
> Âdrivers/dma/dw/platform.cÂÂÂÂÂÂÂÂÂÂÂÂ| 5 +++++
> Âinclude/linux/platform_data/dma-dw.h | 4 ++--
> Â3 files changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index c2c0a61..e3ff4ea 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -1569,7 +1569,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> Â				(dwc_params >> DWC_PARAMS_MBLK_EN &
> 0x1) == 0;
> Â		} else {
> Â			dwc->block_size = pdata->block_size;
> -			dwc->nollp = pdata->is_nollp;
> +			dwc->nollp = pdata->hw_llp[i];
> Â		}
> Â	}
> Â
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index daeceac..2722e60 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -151,6 +151,11 @@ dw_dma_parse_dt(struct platform_device *pdev)
> Â			pdata->data_width[tmp] = BIT(arr[tmp] &
> 0x07);
> Â	}
> Â
> +	if (!of_property_read_u32_array(np, "hw-llp", arr,
> nr_masters)) {
> +		for (tmp = 0; tmp < nr_masters; tmp++)
> +			pdata->hw_llp[tmp] = arr[tmp];
> +	}
> +
> Â	return pdata;
> Â}
> Â#else
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index 5f0e11e..5bc8124 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -40,19 +40,18 @@ struct dw_dma_slave {
> Â * @is_private: The device channels should be marked as private and
> not for
> Â *	by the general purpose DMA channel allocator.
> Â * @is_memcpy: The device channels do support memory-to-memory
> transfers.
> - * @is_nollp: The device channels does not support multi block
> transfers.
> Â * @chan_allocation_order: Allocate channels starting from 0 or 7
> Â * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
> Â * @block_size: Maximum block size supported by the controller
> Â * @nr_masters: Number of AHB masters supported by the controller
> Â * @data_width: Maximum data width supported by hardware per AHB
> master
> Â *		(in bytes, power of 2)
> + * @hw_llp: Multi block transfers supported by hardware per AHB
> master.
> Â */
> Âstruct dw_dma_platform_data {
> Â	unsigned int	nr_channels;
> Â	bool		is_private;
> Â	bool		is_memcpy;
> -	bool		is_nollp;
> Â#define CHAN_ALLOCATION_ASCENDING	0	/* zero to seven */
> Â#define CHAN_ALLOCATION_DESCENDING	1	/* seven to zero
> */
> Â	unsigned char	chan_allocation_order;
> @@ -62,6 +61,7 @@ struct dw_dma_platform_data {
> Â	unsigned int	block_size;
> Â	unsigned char	nr_masters;
> Â	unsigned char	data_width[DW_DMA_MAX_NR_MASTERS];
> +	unsigned char	hw_llp[DW_DMA_MAX_NR_MASTERS];
> Â};
> Â
> Â#endif /* _PLATFORM_DATA_DMA_DW_H */

-- 
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy