[kvm-unit-tests PATCH v9 3/3] arm: pmu: Add CPI checking

[Wei Huang]

From: Christopher Covington <cov@xxxxxxxxxxxxxx>

Calculate the numbers of cycles per instruction (CPI) implied by ARM
PMU cycle counter values. The code includes a strict checking facility
intended for the -icount option in TCG mode in the configuration file.

Signed-off-by: Christopher Covington <cov@xxxxxxxxxxxxxx>
Signed-off-by: Wei Huang <wei@xxxxxxxxxx>
---
 arm/pmu.c         | 111 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
 arm/unittests.cfg |  14 +++++++
 2 files changed, 124 insertions(+), 1 deletion(-)

diff --git a/arm/pmu.c b/arm/pmu.c
index fa87de4..b36c4fb 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -104,6 +104,25 @@ static inline uint32_t id_dfr0_read(void)
 	asm volatile("mrc p15, 0, %0, c0, c1, 2" : "=r" (val));
 	return val;
 }
+
+/*
+ * Extra instructions inserted by the compiler would be difficult to compensate
+ * for, so hand assemble everything between, and including, the PMCR accesses
+ * to start and stop counting.
+ */
+static inline void loop(int i, uint32_t pmcr)
+{
+	asm volatile(
+	"	mcr	p15, 0, %[pmcr], c9, c12, 0\n"
+	"	isb\n"
+	"1:	subs	%[i], %[i], #1\n"
+	"	bgt	1b\n"
+	"	mcr	p15, 0, %[z], c9, c12, 0\n"
+	"	isb\n"
+	: [i] "+r" (i)
+	: [pmcr] "r" (pmcr), [z] "r" (0)
+	: "cc");
+}
 #elif defined(__aarch64__)
 static inline uint32_t pmcr_read(void)
 {
@@ -150,6 +169,25 @@ static inline uint32_t id_dfr0_read(void)
 	asm volatile("mrs %0, id_dfr0_el1" : "=r" (id));
 	return id;
 }
+
+/*
+ * Extra instructions inserted by the compiler would be difficult to compensate
+ * for, so hand assemble everything between, and including, the PMCR accesses
+ * to start and stop counting.
+ */
+static inline void loop(int i, uint32_t pmcr)
+{
+	asm volatile(
+	"	msr	pmcr_el0, %[pmcr]\n"
+	"	isb\n"
+	"1:	subs	%[i], %[i], #1\n"
+	"	b.gt	1b\n"
+	"	msr	pmcr_el0, xzr\n"
+	"	isb\n"
+	: [i] "+r" (i)
+	: [pmcr] "r" (pmcr)
+	: "cc");
+}
 #endif
 
 /*
@@ -204,6 +242,71 @@ static bool check_cycles_increase(void)
 	return success;
 }
 
+/*
+ * Execute a known number of guest instructions. Only odd instruction counts
+ * greater than or equal to 3 are supported by the in-line assembly code. The
+ * control register (PMCR_EL0) is initialized with the provided value (allowing
+ * for example for the cycle counter or event counters to be reset). At the end
+ * of the exact instruction loop, zero is written to PMCR_EL0 to disable
+ * counting, allowing the cycle counter or event counters to be read at the
+ * leisure of the calling code.
+ */
+static void measure_instrs(int num, uint32_t pmcr)
+{
+	int i = (num - 1) / 2;
+
+	assert(num >= 3 && ((num - 1) % 2 == 0));
+	loop(i, pmcr);
+}
+
+/*
+ * Measure cycle counts for various known instruction counts. Ensure that the
+ * cycle counter progresses (similar to check_cycles_increase() but with more
+ * instructions and using reset and stop controls). If supplied a positive,
+ * nonzero CPI parameter, also strictly check that every measurement matches
+ * it. Strict CPI checking is used to test -icount mode.
+ */
+static bool check_cpi(int cpi)
+{
+	uint32_t pmcr = pmcr_read() | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_E;
+	
+	if (cpi > 0)
+		printf("Checking for CPI=%d.\n", cpi);
+	printf("instrs : cycles0 cycles1 ...\n");
+
+	for (unsigned int i = 3; i < 300; i += 32) {
+		uint64_t avg, sum = 0;
+
+		printf("%d :", i);
+		for (int j = 0; j < NR_SAMPLES; j++) {
+			uint64_t cycles;
+
+			pmccntr_write(0);
+			measure_instrs(i, pmcr);
+			cycles = pmccntr_read();
+			printf(" %"PRId64"", cycles);
+
+			/*
+			 * The cycles taken by the loop above should fit in
+			 * 32 bits easily. We check the upper 32 bits of the
+			 * cycle counter to make sure there is no supprise.
+			 */
+			if (!cycles || (cpi > 0 && cycles != i * cpi) ||
+			    (cycles & 0xffffffff00000000)) {
+				printf("\n");
+				return false;
+			}
+
+			sum += cycles;
+		}
+		avg = sum / NR_SAMPLES;
+		printf(" sum=%"PRId64" avg=%"PRId64" avg_ipc=%"PRId64" "
+		       "avg_cpi=%"PRId64"\n", sum, avg, i / avg, avg / i);
+	}
+
+	return true;
+}
+
 void pmu_init(void)
 {
 	uint32_t dfr0;
@@ -218,13 +321,19 @@ void pmu_init(void)
 	pmccfiltr_write(0); /* count cycles in EL0, EL1, but not EL2 */
 }
 
-int main(void)
+int main(int argc, char *argv[])
 {
+	int cpi = 0;
+
+	if (argc >= 1)
+		cpi = atol(argv[0]);
+
 	report_prefix_push("pmu");
 
 	pmu_init();
 	report("Control register", check_pmcr());
 	report("Monotonically increasing cycle count", check_cycles_increase());
+	report("Cycle/instruction ratio", check_cpi(cpi));
 
 	return report_summary();
 }
diff --git a/arm/unittests.cfg b/arm/unittests.cfg
index 7645180..2050dc8 100644
--- a/arm/unittests.cfg
+++ b/arm/unittests.cfg
@@ -59,3 +59,17 @@ groups = selftest
 [pmu]
 file = pmu.flat
 groups = pmu
+
+# Test PMU support (TCG) with -icount IPC=1
+[pmu-tcg-icount-1]
+file = pmu.flat
+extra_params = -icount 0 -append '1'
+groups = pmu
+accel = tcg
+
+# Test PMU support (TCG) with -icount IPC=256
+[pmu-tcg-icount-256]
+file = pmu.flat
+extra_params = -icount 8 -append '256'
+groups = pmu
+accel = tcg
-- 
1.8.3.1