Re: [RFC,2/2] hwmon: adt7411: add min, max and alarm attributes

From: Guenter Roeck
Date: Sat Nov 19 2016 - 13:06:02 EST

Next message: Dmitry Torokhov: "Re: [PATCH v6 2/8] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does"
Previous message: Krzysztof Kozlowski: "Re: [PATCH 2/6] ASoC: samsung: smdk_wm8580: Remove old platforms and drop mach-types usage"
Next in thread: Michael Walle: "Re: [RFC,2/2] hwmon: adt7411: add min, max and alarm attributes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Michael,

On Fri, Oct 14, 2016 at 11:43:35AM +0200, Michael Walle wrote:
> This patch adds support for the min, max and alarm attributes of the
> voltage and temperature channels. Additionally, the temp2_fault attribute
> is supported which indicates a fault of the external temperature diode.
>
> Signed-off-by: Michael Walle <michael@xxxxxxxx>

Sorry for the late reply. Mostly looks ok.
Couple of comments below.

Guenter

> ---
> drivers/hwmon/adt7411.c | 306 ++++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 271 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
> index 2f44cdc..c6351b8 100644
> --- a/drivers/hwmon/adt7411.c
> +++ b/drivers/hwmon/adt7411.c
> @@ -21,6 +21,21 @@
> #include <linux/hwmon-sysfs.h>
> #include <linux/slab.h>
>
> +#define ADT7411_REG_STAT_1 0x00
> +#define ADT7411_STAT_1_INT_TEMP_HIGH (1 << 0)
> +#define ADT7411_STAT_1_INT_TEMP_LOW (1 << 1)
> +#define ADT7411_STAT_1_EXT_TEMP_HIGH_AIN1 (1 << 2)
> +#define ADT7411_STAT_1_EXT_TEMP_LOW (1 << 3)
> +#define ADT7411_STAT_1_EXT_TEMP_FAULT (1 << 4)
> +#define ADT7411_STAT_1_AIN2 (1 << 5)
> +#define ADT7411_STAT_1_AIN3 (1 << 6)
> +#define ADT7411_STAT_1_AIN4 (1 << 7)
> +#define ADT7411_REG_STAT_2 0x01
> +#define ADT7411_STAT_2_AIN5 (1 << 0)
> +#define ADT7411_STAT_2_AIN6 (1 << 1)
> +#define ADT7411_STAT_2_AIN7 (1 << 2)
> +#define ADT7411_STAT_2_AIN8 (1 << 3)
> +#define ADT7411_STAT_2_VDD (1 << 4)

Please use BIT().

> #define ADT7411_REG_INT_TEMP_VDD_LSB 0x03
> #define ADT7411_REG_EXT_TEMP_AIN14_LSB 0x04
> #define ADT7411_REG_VDD_MSB 0x06
> @@ -43,6 +58,17 @@
> #define ADT7411_CFG3_RESERVED_BIT3 (1 << 3)
> #define ADT7411_CFG3_REF_VDD (1 << 4)
>
> +#define ADT7411_REG_VDD_HIGH 0x23
> +#define ADT7411_REG_VDD_LOW 0x24
> +#define ADT7411_REG_TEMP_HIGH(nr) (0x25 + 2 * (nr))
> +#define ADT7411_REG_TEMP_LOW(nr) (0x26 + 2 * (nr))
> +#define ADT7411_REG_IN_HIGH(nr) ((nr) > 1 \
> + ? 0x2b + 2 * ((nr)-2) \
> + : 0x27)
> +#define ADT7411_REG_IN_LOW(nr) ((nr) > 1 \
> + ? 0x2c + 2 * ((nr)-2) \
> + : 0x28)
> +
> #define ADT7411_REG_DEVICE_ID 0x4d
> #define ADT7411_REG_MANUFACTURER_ID 0x4e
>
> @@ -51,6 +77,30 @@
>
> static const unsigned short normal_i2c[] = { 0x48, 0x4a, 0x4b, I2C_CLIENT_END };
>
> +static const u8 adt7411_in_alarm_reg[] = {
> + ADT7411_REG_STAT_2,
> + ADT7411_REG_STAT_1,
> + ADT7411_REG_STAT_1,
> + ADT7411_REG_STAT_1,
> + ADT7411_REG_STAT_1,
> + ADT7411_REG_STAT_2,
> + ADT7411_REG_STAT_2,
> + ADT7411_REG_STAT_2,
> + ADT7411_REG_STAT_2,
> +};
> +
> +static const u8 adt7411_in_alarm_bits[] = {
> + ADT7411_STAT_2_VDD,
> + ADT7411_STAT_1_EXT_TEMP_HIGH_AIN1,
> + ADT7411_STAT_1_AIN2,
> + ADT7411_STAT_1_AIN3,
> + ADT7411_STAT_1_AIN4,
> + ADT7411_STAT_2_AIN5,
> + ADT7411_STAT_2_AIN6,
> + ADT7411_STAT_2_AIN7,
> + ADT7411_STAT_2_AIN8,
> +};
> +
> struct adt7411_data {
> struct mutex device_lock; /* for "atomic" device accesses */
> struct mutex update_lock;
> @@ -165,6 +215,19 @@ static struct attribute *adt7411_attrs[] = {
> };
> ATTRIBUTE_GROUPS(adt7411);
>
> +static int adt7411_read_in_alarm(struct device *dev, int channel, long *val)
> +{
> + struct adt7411_data *data = dev_get_drvdata(dev);
> + struct i2c_client *client = data->client;
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(client, adt7411_in_alarm_reg[channel]);
> + if (ret < 0)
> + return ret;
> + *val = !!(ret & adt7411_in_alarm_bits[channel]);
> + return 0;
> +}
> +
> static int adt7411_read_in_vdd(struct device *dev, u32 attr, long *val)
> {
> struct adt7411_data *data = dev_get_drvdata(dev);
> @@ -179,32 +242,40 @@ static int adt7411_read_in_vdd(struct device *dev, u32 attr, long *val)
> return ret;
> *val = ret * 7000 / 1024;
> return 0;
> + case hwmon_in_min:
> + ret = i2c_smbus_read_byte_data(client, ADT7411_REG_VDD_LOW);
> + if (ret < 0)
> + return ret;
> + *val = ret * 7000 / 256;
> + return 0;
> + case hwmon_in_max:
> + ret = i2c_smbus_read_byte_data(client, ADT7411_REG_VDD_HIGH);
> + if (ret < 0)
> + return ret;
> + *val = ret * 7000 / 256;
> + case hwmon_in_alarm:
> + return adt7411_read_in_alarm(dev, 0, val);
> default:
> return -EOPNOTSUPP;
> }
> }
>
> -static int adt7411_read_in_chan(struct device *dev, u32 attr, int channel,
> - long *val)
> +static int adt7411_update_vref(struct device *dev)
> {
> struct adt7411_data *data = dev_get_drvdata(dev);
> struct i2c_client *client = data->client;
> + int val;
>
> - int ret;
> - int lsb_reg, lsb_shift;
> - int nr = channel - 1;
> -
> - mutex_lock(&data->update_lock);
> if (time_after_eq(jiffies, data->next_update)) {
> - ret = i2c_smbus_read_byte_data(client, ADT7411_REG_CFG3);
> - if (ret < 0)
> - goto exit_unlock;
> + val = i2c_smbus_read_byte_data(client, ADT7411_REG_CFG3);
> + if (val < 0)
> + return val;
>
> - if (ret & ADT7411_CFG3_REF_VDD) {
> - ret = adt7411_read_in_vdd(dev, hwmon_in_input,
> + if (val & ADT7411_CFG3_REF_VDD) {
> + val = adt7411_read_in_vdd(dev, hwmon_in_input,
> &data->vref_cached);
> - if (ret < 0)
> - goto exit_unlock;
> + if (val < 0)
> + return val;
> } else {
> data->vref_cached = 2250;
> }
> @@ -212,6 +283,24 @@ static int adt7411_read_in_chan(struct device *dev, u32 attr, int channel,
> data->next_update = jiffies + HZ;
> }
>
> + return 0;
> +}
> +
> +static int adt7411_read_in_chan(struct device *dev, u32 attr, int channel,
> + long *val)
> +{
> + struct adt7411_data *data = dev_get_drvdata(dev);
> + struct i2c_client *client = data->client;
> +
> + int ret;
> + int reg, lsb_reg, lsb_shift;
> + int nr = channel - 1;
> +
> + mutex_lock(&data->update_lock);
> + ret = adt7411_update_vref(dev);
> + if (ret < 0)
> + goto exit_unlock;
> +
> switch (attr) {
> case hwmon_in_input:
> lsb_reg = ADT7411_REG_EXT_TEMP_AIN14_LSB + (nr >> 2);
> @@ -223,6 +312,20 @@ static int adt7411_read_in_chan(struct device *dev, u32 attr, int channel,
> *val = ret * data->vref_cached / 1024;
> ret = 0;
> break;
> + case hwmon_in_min:
> + case hwmon_in_max:
> + reg = (attr == hwmon_in_min)
> + ? ADT7411_REG_IN_LOW(channel)
> + : ADT7411_REG_IN_HIGH(channel);
> + ret = i2c_smbus_read_byte_data(client, reg);
> + if (ret < 0)
> + goto exit_unlock;
> + *val = ret * data->vref_cached / 256;
> + ret = 0;
> + break;
> + case hwmon_in_alarm:
> + ret = adt7411_read_in_alarm(dev, channel, val);
> + break;
> default:
> ret = -EOPNOTSUPP;
> break;
> @@ -241,12 +344,41 @@ static int adt7411_read_in(struct device *dev, u32 attr, int channel,
> return adt7411_read_in_chan(dev, attr, channel, val);
> }
>
> +
> +static int adt7411_read_temp_alarm(struct device *dev, u32 attr, int channel,
> + long *val)
> +{
> + struct adt7411_data *data = dev_get_drvdata(dev);
> + struct i2c_client *client = data->client;
> + int ret, bit;
> +
> + ret = i2c_smbus_read_byte_data(client, ADT7411_REG_STAT_1);
> + if (ret < 0)
> + return ret;
> +
> + switch (attr) {
> + case hwmon_temp_min_alarm:
> + bit = channel ? ADT7411_STAT_1_EXT_TEMP_LOW
> + : ADT7411_STAT_1_INT_TEMP_LOW;
> + break;
> + case hwmon_temp_max_alarm:
> + bit = channel ? ADT7411_STAT_1_EXT_TEMP_HIGH_AIN1
> + : ADT7411_STAT_1_INT_TEMP_HIGH;
> + break;
> + case hwmon_temp_fault:
> + bit = ADT7411_STAT_1_EXT_TEMP_FAULT;
> + break;
> + }
> + *val = !!(ret & bit);

gcc complains that bit may be uninitialized. Please add the missing
default: above. Sure, that won't happen from the code flow, but the
warning can easily be avoided.

> + return 0;
> +}
> +
> static int adt7411_read_temp(struct device *dev, u32 attr, int channel,
> long *val)
> {
> struct adt7411_data *data = dev_get_drvdata(dev);
> struct i2c_client *client = data->client;
> - int ret, regl, regh;
> + int ret, reg, regl, regh;
>
> switch (attr) {
> case hwmon_temp_input:
> @@ -260,6 +392,21 @@ static int adt7411_read_temp(struct device *dev, u32 attr, int channel,
> ret = ret & 0x200 ? ret - 0x400 : ret; /* 10 bit signed */
> *val = ret * 250;
> return 0;
> + case hwmon_temp_min:
> + case hwmon_temp_max:
> + reg = (attr == hwmon_temp_min)
> + ? ADT7411_REG_TEMP_LOW(channel)
> + : ADT7411_REG_TEMP_HIGH(channel);
> + ret = i2c_smbus_read_byte_data(client, reg);
> + if (ret < 0)
> + return ret;
> + ret = ret & 0x80 ? ret - 0x100 : ret; /* 8 bit signed */
> + *val = ret * 1000;
> + return 0;
> + case hwmon_temp_min_alarm:
> + case hwmon_temp_max_alarm:
> + case hwmon_temp_fault:
> + return adt7411_read_temp_alarm(dev, attr, channel, val);
> default:
> return -EOPNOTSUPP;
> }
> @@ -278,26 +425,112 @@ static int adt7411_read(struct device *dev, enum hwmon_sensor_types type,
> }
> }
>
> +static int adt7411_write_in(struct device *dev, u32 attr, int channel,
> + long val)
> +{
> + struct adt7411_data *data = dev_get_drvdata(dev);
> + struct i2c_client *client = data->client;
> + int ret, reg;
> +
> + mutex_lock(&data->update_lock);
> + ret = adt7411_update_vref(dev);
> + if (ret < 0)
> + goto exit_unlock;
> + val = DIV_ROUND_CLOSEST(val * 256, data->vref_cached);
> + val = clamp_val(val, 0, 255);
> +
> + switch (attr) {
> + case hwmon_in_min:
> + reg = ADT7411_REG_IN_LOW(channel);
> + break;
> + case hwmon_in_max:
> + reg = ADT7411_REG_IN_HIGH(channel);
> + break;
> + default:
> + ret = -EOPNOTSUPP;
> + goto exit_unlock;
> + }
> +
> + ret = i2c_smbus_write_byte_data(client, reg, val);
> + exit_unlock:
> + mutex_unlock(&data->update_lock);
> + return ret;
> +}
> +
> +static int adt7411_write_temp(struct device *dev, u32 attr, int channel,
> + long val)
> +{
> + struct adt7411_data *data = dev_get_drvdata(dev);
> + struct i2c_client *client = data->client;
> + int reg;
> +
> + val = DIV_ROUND_CLOSEST(val, 1000);
> + val = clamp_val(val, -128, 127);
> + val = val < 0 ? 0x100 + val : val;

Does this add any value ? It doesn't change the low byte.

> +
> + switch (attr) {
> + case hwmon_temp_min:
> + reg = ADT7411_REG_TEMP_LOW(channel);
> + break;
> + case hwmon_temp_max:
> + reg = ADT7411_REG_TEMP_HIGH(channel);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return i2c_smbus_write_byte_data(client, reg, val);
> +}
> +
> +static int adt7411_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + switch (type) {
> + case hwmon_in:
> + return adt7411_write_in(dev, attr, channel, val);
> + case hwmon_temp:
> + return adt7411_write_temp(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> static umode_t adt7411_is_visible(const void *_data,
> enum hwmon_sensor_types type,
> u32 attr, int channel)
> {
> const struct adt7411_data *data = _data;
> + bool visible;
>
> switch (type) {
> case hwmon_in:
> - if (channel > 0 && channel < 3)
> - return data->use_ext_temp ? 0 : S_IRUGO;
> - else
> - return S_IRUGO;
> + visible = channel == 0 || channel >= 2 || !data->use_ext_temp;

in2 is now visible even if external temperature is measured.
This is not correct. Yes, one can read the register, but the
external pin (AIN2) is connected to the temperature sensor.

> + switch (attr) {
> + case hwmon_in_input:
> + case hwmon_in_alarm:
> + return visible ? S_IRUGO : 0;
> + case hwmon_in_min:
> + case hwmon_in_max:
> + return visible ? S_IRUGO | S_IWUSR : 0;
> + }
> + break;
> case hwmon_temp:
> - if (channel == 1)
> - return data->use_ext_temp ? S_IRUGO : 0;
> - else
> - return S_IRUGO;
> + visible = channel == 0 || data->use_ext_temp;
> + switch (attr) {
> + case hwmon_temp_input:
> + case hwmon_temp_min_alarm:
> + case hwmon_temp_max_alarm:
> + case hwmon_temp_fault:
> + return visible ? S_IRUGO : 0;
> + case hwmon_temp_min:
> + case hwmon_temp_max:
> + return visible ? S_IRUGO | S_IWUSR : 0;
> + }
> + break;
> default:
> - return 0;
> + break;
> }
> + return 0;
> }
>
> static int adt7411_detect(struct i2c_client *client,
> @@ -371,15 +604,15 @@ static int adt7411_init_device(struct adt7411_data *data)
> }
>
> static const u32 adt7411_in_config[] = {
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> - HWMON_I_INPUT,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
> 0
> };
>
> @@ -389,8 +622,10 @@ static const struct hwmon_channel_info adt7411_in = {
> };
>
> static const u32 adt7411_temp_config[] = {
> - HWMON_T_INPUT,
> - HWMON_T_INPUT,
> + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MIN_ALARM |
> + HWMON_T_MAX | HWMON_T_MAX_ALARM,
> + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MIN_ALARM |
> + HWMON_T_MAX | HWMON_T_MAX_ALARM | HWMON_T_FAULT,
> 0
> };
>
> @@ -408,6 +643,7 @@ static const struct hwmon_channel_info *adt7411_info[] = {
> static const struct hwmon_ops adt7411_hwmon_ops = {
> .is_visible = adt7411_is_visible,
> .read = adt7411_read,
> + .write = adt7411_write,
> };
>
> static const struct hwmon_chip_info adt7411_chip_info = {

Next message: Dmitry Torokhov: "Re: [PATCH v6 2/8] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does"
Previous message: Krzysztof Kozlowski: "Re: [PATCH 2/6] ASoC: samsung: smdk_wm8580: Remove old platforms and drop mach-types usage"
Next in thread: Michael Walle: "Re: [RFC,2/2] hwmon: adt7411: add min, max and alarm attributes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]