Re: [RFC,2/2] hwmon: adt7411: add min, max and alarm attributes

[Guenter Roeck]

On Fri, Oct 14, 2016 at 11:43:35AM +0200, Michael Walle wrote:
> This patch adds support for the min, max and alarm attributes of the
> voltage and temperature channels. Additionally, the temp2_fault attribute
> is supported which indicates a fault of the external temperature diode.
> 
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> ---
>  drivers/hwmon/adt7411.c | 306 ++++++++++++++++++++++++++++++++++++++++++------
>  1 file changed, 271 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
> index 2f44cdc..c6351b8 100644
> --- a/drivers/hwmon/adt7411.c
> +++ b/drivers/hwmon/adt7411.c
[ ... ]
>  static int adt7411_read_in_vdd(struct device *dev, u32 attr, long *val)
>  {
>  	struct adt7411_data *data = dev_get_drvdata(dev);
> @@ -179,32 +242,40 @@ static int adt7411_read_in_vdd(struct device *dev, u32 attr, long *val)
>  			return ret;
>  		*val = ret * 7000 / 1024;
>  		return 0;
> +	case hwmon_in_min:
> +		ret = i2c_smbus_read_byte_data(client, ADT7411_REG_VDD_LOW);
> +		if (ret < 0)
> +			return ret;
> +		*val = ret * 7000 / 256;
> +		return 0;
> +	case hwmon_in_max:
> +		ret = i2c_smbus_read_byte_data(client, ADT7411_REG_VDD_HIGH);
> +		if (ret < 0)
> +			return ret;
> +		*val = ret * 7000 / 256;

		return 0;

> +	case hwmon_in_alarm:
> +		return adt7411_read_in_alarm(dev, 0, val);
>  	default:
>  		return -EOPNOTSUPP;
>  	}
>  }