Re: Synopsys Ethernet QoS Driver

[Joao Pinto]

On 21-11-2016 15:43, Lars Persson wrote:
> 
> 
>> 21 nov. 2016 kl. 16:06 skrev Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>:
>>
>>> On 21-11-2016 14:25, Giuseppe CAVALLARO wrote:
>>>> On 11/21/2016 2:28 PM, Lars Persson wrote:
>>>>
>>>>
>>>>> 21 nov. 2016 kl. 13:53 skrev Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>:
>>>>>
>>>>> Hello Joao
>>>>>
>>>>>> On 11/21/2016 1:32 PM, Joao Pinto wrote:
>>>>>> Hello,
>>>>>>
>>>>>>>> On 21-11-2016 05:29, Rayagond Kokatanur wrote:
>>>>>>>>> On Sat, Nov 19, 2016 at 7:26 PM, Rabin Vincent <rabin@xxxxxx> wrote:
>>>>>>>>> On Fri, Nov 18, 2016 at 02:20:27PM +0000, Joao Pinto wrote:
>>>>>>>>> For now we are interesting in improving the synopsys QoS driver under
>>>>>>>>> /nect/ethernet/synopsys. For now the driver structure consists of a
>>>>>>>>> single file
>>>>>>>>> called dwc_eth_qos.c, containing synopsys ethernet qos common ops and

snip (...)

>>>>> The stmmac drivers run since many years on several platforms
>>>>> (sh4, stm32, arm, x86, mips ...) and it supports an huge of amount of
>>>>> configurations starting from 3.1x to 3.7x databooks.
>>>>>
>>>>> It also supports QoS hardware; for example, 4.00a, 4.10a and 4.20a
>>>>> are fully working.
>>>>>
>>>>> Also the stmmac has platform, device-tree and pcie supports and
>>>>> a lot of maintained glue-logic files.
>>>>>
>>>>> It is fully documented inside the kernel tree.
>>>>>
>>>>> I am happy to have new enhancements from other developers.
>>>>> So, on my side, if you want to spend your time on improving it on your
>>>>> platforms please feel free to do it!
>>>>>
>>>>> Concerning the stmicro/stmmac naming, these come from a really old
>>>>> story and have no issue to adopt new folder/file names.
>>>>>
>>>>> I am also open to merge fixes and changes from ethernet/synopsis.
>>>>> I want to point you on some benchmarks made by Alex some months ago
>>>>> (IIRC) that showed an stmmac winner (due to the several optimizations
>>>>> analyzed and reviewed in this mailing list).
>>>>>
>>>>> Peppe
>>>>>
>>>>
>>>> Hello Joao and others,
>>>>
>>
>> Hi Lars,
>>
>>>> As the maintainer of dwc_eth_qos.c I prefer also that we put efforts on the
>>>> most mature driver, the stmmac.
>>>>
>>>> I hope that the code can migrate into an ethernet/synopsys folder to keep the
>>>> convention of naming the folder after the vendor. This makes it easy for
>>>> others to find the driver.
>>>>
>>>> The dwc_eth_qos.c will eventually be removed and its DT binding interface can
>>>> then be implemented in the stmmac driver.
>>
>> So your ideia is to pick the ethernet/stmmac and rename it to ethernet/synopsys
>> and try to improve the structure and add the missing QoS features to it?
> 
> Indeed this is what I prefer.

Ok, it makes sense.
Just for curiosity the target setup is the following:
https://www.youtube.com/watch?v=8V-LB5y2Cos
but instead of using internal drivers, we desire to use mainline drivers only.

Thanks!

> 
>>
>>>
>>> Thanks Lars, I will be happy to support all you on this transition
>>> and I agree on renaming all.
>>>
>>> peppe
>>>
>>>
>>>> - Lars
>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> (See http://lists.openwall.net/netdev/2016/02/29/127)
>>>>>>>>
>>>>>>>> The former only supports 4.x of the hardware.
>>>>>>>>
>>>>>>>> The later supports 4.x and 3.x and already has a platform glue driver
>>>>>>>> with support for several platforms, a PCI glue driver, and a core driver
>>>>>>>> with several features not present in the former (for example: TX/RX
>>>>>>>> interrupt coalescing, EEE, PTP).
>>>>>>>>
>>>>>>>> Have you evaluated both drivers?  Why have you decided to work on the
>>>>>>>> former rather than the latter?
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>