[PATCH 1/6] apalis-tk1: remove spurious new lines

From: Marcel Ziswiler
Date: Mon Nov 21 2016 - 19:21:18 EST

Remove some spurious new lines.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---

arch/arm/boot/dts/tegra124-apalis-eval.dts | 1 -
arch/arm/boot/dts/tegra124-apalis.dtsi | 12 ------------
2 files changed, 13 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 653044a..2b5a0f3 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -232,7 +232,6 @@

backlight: backlight {
compatible = "pwm-backlight";
-
/* BKL1_PWM */
pwms = <&pwm 3 5000000>;
brightness-levels = <255 231 223 207 191 159 127 0>;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0819721..6aa4952 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -56,7 +56,6 @@

pcie-controller@01003000 {
status = "okay";
-
avddio-pex-supply = <&vdd_1v05>;
avdd-pex-pll-supply = <&vdd_1v05>;
avdd-pll-erefe-supply = <&avdd_1v05>;
@@ -85,7 +84,6 @@
hdmi@54280000 {
pll-supply = <&reg_1v05_avdd_hdmi_pll>;
vdd-supply = <&reg_3v3_avdd_hdmi>;
-
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -1607,15 +1605,11 @@
compatible = "ams,as3722";
reg = <0x40>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
ams,system-power-controller;
-
#interrupt-cells = <2>;
interrupt-controller;
-
gpio-controller;
#gpio-cells = <2>;
-
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;

@@ -1790,7 +1784,6 @@
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
#thermal-sensor-cells = <1>;
};
};
@@ -1823,7 +1816,6 @@
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
-
avdd-supply = <&vdd_1v05>;
hvdd-supply = <&reg_3v3>;
vddio-supply = <&vdd_1v05>;
@@ -1837,7 +1829,6 @@
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-
avddio-pex-supply = <&vdd_1v05>;
avdd-pll-erefe-supply = <&avdd_1v05>;
avdd-pll-utmip-supply = <&vddio_1v8>;
@@ -1919,7 +1910,6 @@
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <&reg_usbo1_vbus>;
};

@@ -1927,7 +1917,6 @@
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <&reg_usbh_vbus>;
};

@@ -1935,7 +1924,6 @@
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <&reg_usbh_vbus>;
};

--
2.5.5