[PATCH] mwifiex: pcie: implement timeout loop for FW programming doorbell

[Brian Norris]

Marvell Wifi PCIe modules don't always behave nicely for PCIe power
management when their firmware hasn't been loaded, particularly after
suspending the PCIe link one or more times. When this happens, we might
end up spinning forever in this status-polling tight loop. Let's make
this less tight by adding a timeout and by sleeping a bit in between
reads, as we do with the other similar loops.

This prevents us from hogging a CPU even in such pathological cases, and
allows the FW initialization to just fail gracefully instead.

I chose the same polling parameters as the earlier loop in this
function, and empirically, I found that this loop never makes it more
than about 12 cycles in a sane FW init sequence. I had no official
information on the actual intended latency for this portion of the
download.

Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 4b89f557d0b6..9f9ea1350591 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -2050,7 +2050,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 		}
 
 		/* Wait for the command done interrupt */
-		do {
+		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
 			if (mwifiex_read_reg(adapter, PCIE_CPU_INT_STATUS,
 					     &ireg_intr)) {
 				mwifiex_dbg(adapter, ERROR,
@@ -2062,8 +2062,18 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 				ret = -1;
 				goto done;
 			}
-		} while ((ireg_intr & CPU_INTR_DOOR_BELL) ==
-			 CPU_INTR_DOOR_BELL);
+			if (!(ireg_intr & CPU_INTR_DOOR_BELL))
+				break;
+			usleep_range(10, 20);
+		}
+		if (ireg_intr & CPU_INTR_DOOR_BELL) {
+			mwifiex_dbg(adapter, ERROR, "%s: Card failed to ACK download\n",
+				    __func__);
+			mwifiex_unmap_pci_memory(adapter, skb,
+						 PCI_DMA_TODEVICE);
+			ret = -1;
+			goto done;
+		}
 
 		mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE);
 
-- 
2.8.0.rc3.226.g39d4020