[RFC][PATCH 2/3] HACK: dwc2: force dual use of uphy and phy

[John Stultz]

I can't seem to figure out how to connect a generic phy device
to the usb UDC logic, as the dwc2 code seems to exclusively work
with either generic phys or usb-phys.

So to try to make this work with the phy-hi6220-usb driver, tweak
the dwc2 logic to support call hooks to both phy and uphy devices.

I realize this is likely wrong, but without a good pointer as to
how this should be done, I'm a bit wandering around in the dark.

Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx>
Cc: Guodong Xu <guodong.xu@xxxxxxxxxx>
Cc: Amit Pundir <amit.pundir@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: John Youn <johnyoun@xxxxxxxxxxxx>
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Cc: Chen Yu <chenyu56@xxxxxxxxxx>
Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
---
 drivers/usb/dwc2/platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 8e1728b..8fb2f4d 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -297,7 +297,7 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
 
 	if (hsotg->uphy)
 		ret = usb_phy_init(hsotg->uphy);
-	else if (hsotg->plat && hsotg->plat->phy_init)
+	if (hsotg->plat && hsotg->plat->phy_init)
 		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 	else {
 		ret = phy_power_on(hsotg->phy);
@@ -411,7 +411,7 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 		}
 	}
 
-	if (!hsotg->phy) {
+	if (1 || !hsotg->phy) {
 		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
 		if (IS_ERR(hsotg->uphy)) {
 			ret = PTR_ERR(hsotg->uphy);
-- 
2.7.4