Re: [PATCH v3] media: i2c-polling: add i2c-polling driver

From: Matt Ranostay
Date: Thu Nov 24 2016 - 03:04:30 EST

On Wed, Nov 23, 2016 at 10:31 PM, Matt Ranostay
<matt@xxxxxxxxxxxxxxxxxxx> wrote:
> On Wed, Nov 23, 2016 at 8:30 AM, Laurent Pinchart
> <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>> Hi Matt,
>>
>> Thank you for the patch.
>>
>> On Tuesday 22 Nov 2016 17:18:40 Matt Ranostay wrote:
>>> There are several thermal sensors that only have a low-speed bus
>>> interface but output valid video data. This patchset enables support
>>> for the AMG88xx "Grid-Eye" sensor family.
>>>
>>> Cc: Attila Kinali <attila@xxxxxxxxx>
>>> Cc: Marek Vasut <marex@xxxxxxx>
>>> Cc: Luca Barbato <lu_zero@xxxxxxxxxx>
>>> Signed-off-by: Matt Ranostay <matt@xxxxxxxxxxxxxxxxxxx>
>>> ---
>>> Changes from v1:
>>> * correct i2c_polling_remove() operations
>>> * fixed delay calcuation in buffer_queue()
>>> * add include linux/slab.h
>>>
>>> Changes from v2:
>>> * fix build error due to typo in include of slab.h
>>>
>>> drivers/media/i2c/Kconfig | 8 +
>>> drivers/media/i2c/Makefile | 1 +
>>> drivers/media/i2c/i2c-polling.c | 469 +++++++++++++++++++++++++++++++++++++
>>
>> Just looking at the driver name I believe a rename is needed. i2c-polling is a
>> very generic name and would mislead many people into thinking about an I2C
>> subsystem core feature instead of a video driver. "video-i2c" is one option,
>> I'm open to other ideas.
>>
>>> 3 files changed, 478 insertions(+)
>>> create mode 100644 drivers/media/i2c/i2c-polling.c
>>>
>>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
>>> index b31fa6fae009..d840e7be0036 100644
>>> --- a/drivers/media/i2c/Kconfig
>>> +++ b/drivers/media/i2c/Kconfig
>>> @@ -768,6 +768,14 @@ config VIDEO_M52790
>>>
>>> To compile this driver as a module, choose M here: the
>>> module will be called m52790.
>>> +
>>> +config VIDEO_I2C_POLLING
>>> + tristate "I2C polling video support"
>>> + depends on VIDEO_V4L2 && I2C
>>> + select VIDEOBUF2_VMALLOC
>>> + ---help---
>>> + Enable the I2C polling video support which supports the following:
>>> + * Panasonic AMG88xx Grid-Eye Sensors
>>> endmenu
>>>
>>> menu "Sensors used on soc_camera driver"
>>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
>>> index 92773b2e6225..8182ec9f66b9 100644
>>> --- a/drivers/media/i2c/Makefile
>>> +++ b/drivers/media/i2c/Makefile
>>> @@ -79,6 +79,7 @@ obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
>>> obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o
>>> obj-$(CONFIG_VIDEO_AK881X) += ak881x.o
>>> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
>>> +obj-$(CONFIG_VIDEO_I2C_POLLING) += i2c-polling.o
>>> obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
>>> obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
>>> obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
>>> diff --git a/drivers/media/i2c/i2c-polling.c
>>> b/drivers/media/i2c/i2c-polling.c new file mode 100644
>>> index 000000000000..46a4eecde2d2
>>> --- /dev/null
>>> +++ b/drivers/media/i2c/i2c-polling.c
>>> @@ -0,0 +1,469 @@
>>> +/*
>>> + * i2c_polling.c - Support for polling I2C video devices
>>> + *
>>> + * Copyright (C) 2016 Matt Ranostay <mranostay@xxxxxxxxxxxxxxxxxxx>
>>> + *
>>> + * Based on the orginal work drivers/media/parport/bw-qcam.c
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * Supported:
>>> + * - Panasonic AMG88xx Grid-Eye Sensors
>>> + */
>>> +
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>
>> I don't think you implement device tree support, is linux/of.h needed ? Or
>> maybe you could implement device tree support ;-)
>>
>>> +#include <linux/delay.h>
>>> +#include <linux/videodev2.h>
>>> +#include <linux/mutex.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/i2c.h>
>>> +#include <media/v4l2-common.h>
>>> +#include <media/v4l2-ioctl.h>
>>> +#include <media/v4l2-device.h>
>>> +#include <media/v4l2-fh.h>
>>> +#include <media/v4l2-ctrls.h>
>>> +#include <media/v4l2-event.h>
>>
>> You don't implement any control, you can drop support for control events as
>> well.
>>
>>> +#include <media/videobuf2-vmalloc.h>
>>
>> Please sort includes alphabetically, it makes it easier to locate duplicates.
>>
>>> +#define I2C_POLLING_DRIVER "i2c-polling"
>>> +
>>> +struct i2c_polling_chip;
>>> +
>>> +struct i2c_polling_data {
>>> + struct i2c_client *client;
>>> + const struct i2c_polling_chip *chip;
>>> + struct mutex lock;
>>> + struct mutex queue_lock;
>>> + unsigned int last_update;
>>> +
>>> + struct v4l2_device v4l2_dev;
>>> + struct video_device vdev;
>>> + struct vb2_queue vb_vidq;
>>> +};
>>> +
>>> +static struct v4l2_fmtdesc amg88xx_format = {
>>> + .description = "12-bit Greyscale",
>>> + .pixelformat = V4L2_PIX_FMT_Y12,
>>> +};
>>> +
>>> +static struct v4l2_frmsize_discrete amg88xx_size = {
>>> + .width = 8,
>>> + .height = 8,
>>> +};
>>> +
>>> +struct i2c_polling_chip {
>>> + /* video dimensions */
>>> + struct v4l2_fmtdesc *format;
>>> + struct v4l2_frmsize_discrete *size;
>>> +
>>> + /* max frames per second */
>>> + unsigned int max_fps;
>>> +
>>> + /* pixel buffer size */
>>> + unsigned int buffer_size;
>>> +
>>> + /* xfer function */
>>> + int (*xfer)(struct i2c_polling_data *data, char *buf);
>>> +};
>>> +
>>> +enum {
>>> + AMG88XX = 0,
>>> + I2C_POLLING_CHIP_CNT,
>>> +};
>>> +
>>> +static int amg88xx_xfer(struct i2c_polling_data *data, char *buf)
>>> +{
>>> + struct i2c_client *client = data->client;
>>> + struct i2c_msg msg[2];
>>> + u8 reg = 0x80;
>>> + int ret;
>>> +
>>> + msg[0].addr = client->addr;
>>> + msg[0].flags = 0;
>>> + msg[0].len = 1;
>>> + msg[0].buf = (char *) &reg;
>>> +
>>> + msg[1].addr = client->addr;
>>> + msg[1].flags = I2C_M_RD;
>>> + msg[1].len = data->chip->buffer_size;
>>> + msg[1].buf = (char *) buf;
>>> +
>>> + ret = i2c_transfer(client->adapter, msg, 2);
>>> +
>>> + return (ret == 2) ? 0 : -EIO;
>>> +}
>>> +
>>> +static const struct i2c_polling_chip
>>> i2c_polling_chips[I2C_POLLING_CHIP_CNT] = {
>>> + [AMG88XX] = {
>>> + .size = &amg88xx_size,
>>> + .format = &amg88xx_format,
>>> + .max_fps = 10,
>>> + .buffer_size = 128,
>>> + .xfer = &amg88xx_xfer,
>>> + },
>>> +};
>>> +
>>> +static const struct v4l2_file_operations i2c_polling_fops = {
>>> + .owner = THIS_MODULE,
>>> + .open = v4l2_fh_open,
>>> + .release = vb2_fop_release,
>>> + .poll = vb2_fop_poll,
>>> + .unlocked_ioctl = video_ioctl2,
>>> + .read = vb2_fop_read,
>>> + .mmap = vb2_fop_mmap,
>>> +};
>>> +
>>> +static int queue_setup(struct vb2_queue *vq,
>>> + unsigned int *nbuffers, unsigned int *nplanes,
>>> + unsigned int sizes[], struct device *alloc_devs[])
>>> +{
>>> + struct i2c_polling_data *data = vb2_get_drv_priv(vq);
>>> +
>>> + if (!(*nbuffers))
>>> + *nbuffers = 3;
>>> +
>>> + *nplanes = 1;
>>> + sizes[0] = data->chip->buffer_size;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void buffer_queue(struct vb2_buffer *vb)
>>> +{
>>> + struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
>>> + unsigned int delay = 1000 / data->chip->max_fps;
>>> + int delta;
>>> +
>>> + mutex_lock(&data->lock);
>>> +
>>> + delta = jiffies - data->last_update;
>>> +
>>> + if (delta < msecs_to_jiffies(delay)) {
>>> + int tmp = (delay - jiffies_to_msecs(delta)) * 1000;
>>> +
>>> + usleep_range(tmp, tmp + 1000);
>>> + }
>>> + data->last_update = jiffies;
>>> +
>>> + mutex_unlock(&data->lock);
>>> +
>>> + vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
>>> +}
>>> +
>>> +static void buffer_finish(struct vb2_buffer *vb)
>>> +{
>>> + struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
>>> + void *vbuf = vb2_plane_vaddr(vb, 0);
>>> + int size = vb2_plane_size(vb, 0);
>>> + int ret;
>>> +
>>> + mutex_lock(&data->lock);
>>> +
>>> + ret = data->chip->xfer(data, vbuf);
>>> + if (ret < 0)
>>> + vb->state = VB2_BUF_STATE_ERROR;
>>
>> That's not nice, the status should be set through vb2_buffer_done().
>>
>> You can't transfer data in the buffer_queue handler is that function can't
>> sleep. Instead, I'm wondering whether it would make sense to perform transfers
>> in a workqueue, to making timings less dependent on userspace.
>
>
> About the workqueue how would one signal to that the buffer is written
> to buffer_queue/buffer_finish?
>

Testing the workqueue way and it isn't fine enough... need to use some
form of the high resolution timers. Need to figure the best way to do
that with signaling back to the queue functions.. would completion
queues make sense?


>
>>
>>> + mutex_unlock(&data->lock);
>>> +
>>> + vb->timestamp = ktime_get_ns();
>>> + vb2_set_plane_payload(vb, 0, ret ? 0 : size);
>>> +}
>>> +
>>> +static struct vb2_ops i2c_polling_video_qops = {
>>> + .queue_setup = queue_setup,
>>> + .buf_queue = buffer_queue,
>>> + .buf_finish = buffer_finish,
>>> + .wait_prepare = vb2_ops_wait_prepare,
>>> + .wait_finish = vb2_ops_wait_finish,
>>> +};
>>> +
>>> +static int i2c_polling_querycap(struct file *file, void *priv,
>>> + struct v4l2_capability *vcap)
>>> +{
>>> + struct i2c_polling_data *data = video_drvdata(file);
>>> +
>>> + strlcpy(vcap->driver, data->v4l2_dev.name, sizeof(vcap->driver));
>>> + strlcpy(vcap->card, "I2C Polling Video", sizeof(vcap->card));
>>> +
>>> + strlcpy(vcap->bus_info, "I2C:i2c-polling", sizeof(vcap->bus_info));
>>
>> The bus_info field should contain information to locate the device in the
>> system. It correctly starts with I2C:, but should then be followed by the I2C
>> bus number and the device address.
>>
>>> + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
>>> + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
>>> + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
>>
>> You can set device_caps in the video_device structure instead, the code will
>> fill vcap->device_caps and vcap->capabilities for you.
>>
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_g_input(struct file *file, void *fh, unsigned int
>>> *inp)
>>> +{
>>> + *inp = 0;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_s_input(struct file *file, void *fh, unsigned int
>>> inp)
>>> +{
>>> + return (inp > 0) ? -EINVAL : 0;
>>> +}
>>> +
>>> +static int i2c_polling_enum_input(struct file *file, void *fh,
>>> + struct v4l2_input *vin)
>>> +{
>>> + if (vin->index > 0)
>>> + return -EINVAL;
>>> +
>>> + strlcpy(vin->name, "Camera", sizeof(vin->name));
>>> +
>>> + vin->type = V4L2_INPUT_TYPE_CAMERA;
>>> + vin->audioset = 0;
>>> + vin->tuner = 0;
>>> + vin->std = 0;
>>> + vin->status = 0;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_enum_fmt_vid_cap(struct file *file, void *fh,
>>> + struct v4l2_fmtdesc *fmt)
>>> +{
>>> + struct i2c_polling_data *data = video_drvdata(file);
>>> + enum v4l2_buf_type type = fmt->type;
>>> +
>>> + if (fmt->index > 0)
>>> + return -EINVAL;
>>> +
>>> + *fmt = *data->chip->format;
>>> + fmt->type = type;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_enum_framesizes(struct file *file, void *fh,
>>> + struct v4l2_frmsizeenum *fsize)
>>> +{
>>> + struct i2c_polling_data *data = video_drvdata(file);
>>> + struct v4l2_frmsize_discrete *size = data->chip->size;
>>> +
>>> + /* currently only one frame size is allowed */
>>> + if (fsize->index > 0)
>>> + return -EINVAL;
>>> +
>>> + if (fsize->pixel_format != data->chip->format->pixelformat)
>>> + return -EINVAL;
>>> +
>>> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
>>> + fsize->discrete.width = size->width;
>>> + fsize->discrete.height = size->height;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_enum_frameintervals(struct file *file, void *priv,
>>> + struct v4l2_frmivalenum *fe)
>>> +{
>>> + struct i2c_polling_data *data = video_drvdata(file);
>>> + struct v4l2_frmsize_discrete *size = data->chip->size;
>>> +
>>> + if (fe->index > 0)
>>> + return -EINVAL;
>>> +
>>> + if ((fe->width != size->width) || (fe->height != size->height))
>>> + return -EINVAL;
>>
>> No need for the extra inner parentheses.
>>
>>> +
>>> + fe->type = V4L2_FRMIVAL_TYPE_DISCRETE;
>>> + fe->discrete.numerator = 1;
>>> + fe->discrete.denominator = data->chip->max_fps;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_try_fmt_vid_cap(struct file *file, void *fh,
>>> + struct v4l2_format *fmt)
>>> +{
>>> + struct i2c_polling_data *data = video_drvdata(file);
>>> + struct v4l2_pix_format *pix = &fmt->fmt.pix;
>>> + struct v4l2_frmsize_discrete *size = data->chip->size;
>>> +
>>> + pix->width = size->width;
>>> + pix->height = size->height;
>>> + pix->pixelformat = data->chip->format->pixelformat;
>>> + pix->field = V4L2_FIELD_NONE;
>>> + pix->bytesperline = pix->width * 2;
>>> + pix->sizeimage = pix->width * pix->height * 2;
>>
>> The bytesperline and sizeimage values depend on the format. If you make the
>> format chip-specific, the computation should be generic as well.
>>
>> It's very hard at this time to know how much genericity should be expected
>> from similar sensors. Unless you have more information about that, I would be
>> tempted to make a device-specific driver for now, and then refactor it later
>> to support more devices if the need arises (and if possible in a clean way).
>>
>>> + pix->colorspace = V4L2_COLORSPACE_SRGB;
>>> + pix->priv = 0;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_fmt_vid_cap(struct file *file, void *fh,
>>> + struct v4l2_format *fmt)
>>> +{
>>> + struct i2c_polling_data *data = video_drvdata(file);
>>> + int ret = i2c_polling_try_fmt_vid_cap(file, fh, fmt);
>>> +
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + if (vb2_is_busy(&data->vb_vidq))
>>> + return -EBUSY;
>>
>> A get format operation should be allowed even if the queue is busy, only set
>> format should return -EBUSY.
>>
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_g_parm(struct file *filp, void *priv,
>>> + struct v4l2_streamparm *parm)
>>> +{
>>> + struct i2c_polling_data *data = video_drvdata(filp);
>>> +
>>> + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>>> + return -EINVAL;
>>> +
>>> + parm->parm.capture.readbuffers = 3;
>>> + parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>>> + parm->parm.capture.timeperframe.numerator = 1;
>>> + parm->parm.capture.timeperframe.denominator = data->chip->max_fps;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int i2c_polling_s_parm(struct file *filp, void *priv,
>>> + struct v4l2_streamparm *parm)
>>> +{
>>> + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>>> + return -EINVAL;
>>> +
>>> + return i2c_polling_g_parm(filp, priv, parm);
>>> +}
>>> +
>>> +static const struct v4l2_ioctl_ops i2c_polling_ioctl_ops = {
>>> + .vidioc_querycap = i2c_polling_querycap,
>>> + .vidioc_g_input = i2c_polling_g_input,
>>> + .vidioc_s_input = i2c_polling_s_input,
>>> + .vidioc_enum_input = i2c_polling_enum_input,
>>> + .vidioc_enum_fmt_vid_cap = i2c_polling_enum_fmt_vid_cap,
>>> + .vidioc_enum_framesizes = i2c_polling_enum_framesizes,
>>> + .vidioc_enum_frameintervals = i2c_polling_enum_frameintervals,
>>> + .vidioc_g_fmt_vid_cap = i2c_polling_fmt_vid_cap,
>>> + .vidioc_s_fmt_vid_cap = i2c_polling_fmt_vid_cap,
>>> + .vidioc_g_parm = i2c_polling_g_parm,
>>> + .vidioc_s_parm = i2c_polling_s_parm,
>>> + .vidioc_try_fmt_vid_cap = i2c_polling_try_fmt_vid_cap,
>>> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
>>> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
>>> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
>>> + .vidioc_querybuf = vb2_ioctl_querybuf,
>>> + .vidioc_qbuf = vb2_ioctl_qbuf,
>>> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
>>> + .vidioc_streamon = vb2_ioctl_streamon,
>>> + .vidioc_streamoff = vb2_ioctl_streamoff,
>>
>> No need to set the buffer-related .vidioc_* pointers to vb2_ioctl_*
>> explicitly, the core will use vb2 if the fields are left unset.
>>
>>> + .vidioc_log_status = v4l2_ctrl_log_status,
>>> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
>>> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
>>> +};
>>> +
>>> +static int i2c_polling_probe(struct i2c_client *client,
>>> + const struct i2c_device_id *id)
>>> +{
>>> + struct i2c_polling_data *data;
>>> + struct v4l2_device *v4l2_dev;
>>> + struct vb2_queue *queue;
>>> + int ret;
>>> +
>>> + data = kzalloc(sizeof(*data), GFP_KERNEL);
>>> + if (!data)
>>> + return -ENOMEM;
>>> +
>>> + data->chip = &i2c_polling_chips[id->driver_data];
>>> + data->client = client;
>>> + data->last_update = jiffies;
>>> + v4l2_dev = &data->v4l2_dev;
>>> + strlcpy(v4l2_dev->name, I2C_POLLING_DRIVER, sizeof(v4l2_dev->name));
>>> +
>>> + ret = v4l2_device_register(&client->dev, v4l2_dev);
>>> + if (ret < 0)
>>> + goto error_free_device;
>>> +
>>> + mutex_init(&data->lock);
>>> + mutex_init(&data->queue_lock);
>>> +
>>> + queue = &data->vb_vidq;
>>> + queue->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>>> + queue->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
>>> + queue->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
>>
>> Please also set one of V4L2_BUF_FLAG_TSTAMP_SRC_SOF or
>> V4L2_BUF_FLAG_TSTAMP_SRC_EOF.
>>
>>> + queue->drv_priv = data;
>>> + queue->ops = &i2c_polling_video_qops;
>>> + queue->mem_ops = &vb2_vmalloc_memops;
>>> +
>>> + ret = vb2_queue_init(queue);
>>> + if (ret < 0)
>>> + goto error_free_device;
>>> +
>>> + data->vdev.queue = queue;
>>> + data->vdev.queue->lock = &data->queue_lock;
>>> +
>>> + strlcpy(data->vdev.name, "I2C Polling Video", sizeof(data-
>>>vdev.name));
>>> +
>>> + data->vdev.v4l2_dev = v4l2_dev;
>>> + data->vdev.fops = &i2c_polling_fops;
>>> + data->vdev.lock = &data->lock;
>>> + data->vdev.ioctl_ops = &i2c_polling_ioctl_ops;
>>> + data->vdev.release = video_device_release_empty;
>>
>> You should implement a release function and free the data structure there.
>> Freeing data in the remove operation is a bad idea, as your driver will crash
>> if the device is unbound from the driver during video streaming.
>> Unregistration of the v4l2_device instance can also happen in the release
>> callback. The video_device instance obviously has to be unregistered in the
>> remove operation as done now.
>>
>>> +
>>> + video_set_drvdata(&data->vdev, data);
>>> + i2c_set_clientdata(client, data);
>>> +
>>> + ret = video_register_device(&data->vdev, VFL_TYPE_GRABBER, -1);
>>> + if (ret < 0)
>>> + goto error_unregister_device;
>>> +
>>> + return 0;
>>> +
>>> +error_unregister_device:
>>> + v4l2_device_unregister(v4l2_dev);
>>> +
>>> +error_free_device:
>>> + kfree(data);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int i2c_polling_remove(struct i2c_client *client)
>>> +{
>>> + struct i2c_polling_data *data = i2c_get_clientdata(client);
>>> +
>>> + v4l2_device_unregister(&data->v4l2_dev);
>>> + video_unregister_device(&data->vdev);
>>> + kfree(data);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct i2c_device_id i2c_polling_id_table[] = {
>>> + { "amg88xx", AMG88XX },
>>> + {}
>>> +};
>>> +MODULE_DEVICE_TABLE(i2c, i2c_polling_id_table);
>>> +
>>> +static struct i2c_driver i2c_polling_driver = {
>>> + .driver = {
>>> + .name = I2C_POLLING_DRIVER,
>>> + },
>>> + .probe = i2c_polling_probe,
>>> + .remove = i2c_polling_remove,
>>> + .id_table = i2c_polling_id_table,
>>> +};
>>> +
>>> +module_i2c_driver(i2c_polling_driver);
>>> +
>>> +MODULE_AUTHOR("Matt Ranostay <mranostay@xxxxxxxxxxxxxxxxxxx>");
>>> +MODULE_DESCRIPTION("I2C polling video support");
>>> +MODULE_LICENSE("GPL");
>>
>> --
>> Regards,
>>
>> Laurent Pinchart
>>