[PATCH net-next v3 0/4] Fix OdroidC2 Gigabit Tx link issue
From: Jerome Brunet
Date: Mon Nov 28 2016 - 04:47:09 EST
This patchset fixes an issue with the OdroidC2 board (DWMAC + RTL8211F).
The platform seems to enter LPI on the Rx path too often while performing
relatively high TX transfer. This eventually break the link (both Tx and
Rx), and require to bring the interface down and up again to get the Rx
path working again.
The root cause of this issue is not fully understood yet but disabling EEE
advertisement on the PHY prevent this feature to be negotiated.
With this change, the link is stable and reliable, with the expected
throughput performance.
The patchset adds options in the generic phy driver to disable EEE
advertisement, through device tree. The way it is done is very similar
to the handling of the max-speed property.
Changes since V2: [2]
- Rename "eee-advert-disable" to "eee-broken-modes" to make the intended
purpose of this option clear (flag broken configuration, not a
configuration option)
- Add DT bindings constants so the DT configuration is more user friendly
- Submit to net-next instead of net.
Changes since V1: [1]
- Disable the advertisement of EEE in the generic code instead of the
realtek driver.
[1] : http://lkml.kernel.org/r/1479220154-25851-1-git-send-email-jbrunet@xxxxxxxxxxxx
[2] : http://lkml.kernel.org/r/1479742524-30222-1-git-send-email-jbrunet@xxxxxxxxxxxx
Jerome Brunet (4):
net: phy: add an option to disable EEE advertisement
dt-bindings: net: add EEE capability constants
dt: bindings: add ethernet phy eee-broken-modes option documentation
ARM64: dts: meson: odroidc2: disable advertisement EEE for GbE.
Documentation/devicetree/bindings/net/phy.txt | 2 +
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 16 +++++
drivers/net/phy/phy.c | 3 +
drivers/net/phy/phy_device.c | 80 +++++++++++++++++++---
include/dt-bindings/net/mdio.h | 19 +++++
include/linux/phy.h | 3 +
6 files changed, 114 insertions(+), 9 deletions(-)
create mode 100644 include/dt-bindings/net/mdio.h
--
2.7.4