[PATCH] Input: touchscreen: edt_ft5x06 - change msleep to usleep_range for small msecs

[Aniroop Mathur]

msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, retry logic, etc.
Thus, change msleep to usleep_range for precise wakeups.

Signed-off-by: Aniroop Mathur <a.mathur@xxxxxxxxxxx>
---
 drivers/input/touchscreen/edt-ft5x06.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 703e295..379dd31 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -67,7 +67,7 @@
 #define EDT_SWITCH_MODE_RETRIES		10
 #define EDT_SWITCH_MODE_DELAY		5 /* msec */
 #define EDT_RAW_DATA_RETRIES		100
-#define EDT_RAW_DATA_DELAY		1 /* msec */
+#define EDT_RAW_DATA_DELAY		1000 /* usec */
 
 enum edt_ver {
 	M06,
@@ -664,7 +664,7 @@ static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
 	}
 
 	do {
-		msleep(EDT_RAW_DATA_DELAY);
+		usleep_range(EDT_RAW_DATA_DELAY, EDT_RAW_DATA_DELAY + 100);
 		val = edt_ft5x06_register_read(tsdata, 0x08);
 		if (val < 1)
 			break;
-- 
2.6.2