[PATCH V5 05/10] PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
From: Viresh Kumar
Date: Tue Nov 29 2016 - 01:37:47 EST
Pass the entire supply structure instead of all of its fields.
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Tested-by: Dave Gerlach <d-gerlach@xxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
drivers/base/power/opp/core.c | 44 +++++++++++++++++--------------------------
1 file changed, 17 insertions(+), 27 deletions(-)
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 8d6006151c9a..37fad2eb0f47 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -542,8 +542,7 @@ static struct clk *_get_opp_clk(struct device *dev)
}
static int _set_opp_voltage(struct device *dev, struct regulator *reg,
- unsigned long u_volt, unsigned long u_volt_min,
- unsigned long u_volt_max)
+ struct dev_pm_opp_supply *supply)
{
int ret;
@@ -554,14 +553,15 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg,
return 0;
}
- dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min,
- u_volt, u_volt_max);
+ dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__,
+ supply->u_volt_min, supply->u_volt, supply->u_volt_max);
- ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt,
- u_volt_max);
+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
+ supply->u_volt, supply->u_volt_max);
if (ret)
dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n",
- __func__, u_volt_min, u_volt, u_volt_max, ret);
+ __func__, supply->u_volt_min, supply->u_volt,
+ supply->u_volt_max, ret);
return ret;
}
@@ -583,8 +583,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
struct regulator *reg;
struct clk *clk;
unsigned long freq, old_freq;
- unsigned long u_volt, u_volt_min, u_volt_max;
- unsigned long old_u_volt, old_u_volt_min, old_u_volt_max;
+ struct dev_pm_opp_supply old_supply, new_supply;
int ret;
if (unlikely(!target_freq)) {
@@ -634,17 +633,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
return ret;
}
- if (IS_ERR(old_opp)) {
- old_u_volt = 0;
- } else {
- old_u_volt = old_opp->supply.u_volt;
- old_u_volt_min = old_opp->supply.u_volt_min;
- old_u_volt_max = old_opp->supply.u_volt_max;
- }
+ if (IS_ERR(old_opp))
+ old_supply.u_volt = 0;
+ else
+ memcpy(&old_supply, &old_opp->supply, sizeof(old_supply));
- u_volt = opp->supply.u_volt;
- u_volt_min = opp->supply.u_volt_min;
- u_volt_max = opp->supply.u_volt_max;
+ memcpy(&new_supply, &opp->supply, sizeof(new_supply));
reg = opp_table->regulator;
@@ -652,8 +646,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
/* Scaling up? Scale voltage before frequency */
if (freq > old_freq) {
- ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
- u_volt_max);
+ ret = _set_opp_voltage(dev, reg, &new_supply);
if (ret)
goto restore_voltage;
}
@@ -672,8 +665,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
/* Scaling down? Scale voltage after frequency */
if (freq < old_freq) {
- ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
- u_volt_max);
+ ret = _set_opp_voltage(dev, reg, &new_supply);
if (ret)
goto restore_freq;
}
@@ -686,10 +678,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
__func__, old_freq);
restore_voltage:
/* This shouldn't harm even if the voltages weren't updated earlier */
- if (old_u_volt) {
- _set_opp_voltage(dev, reg, old_u_volt, old_u_volt_min,
- old_u_volt_max);
- }
+ if (old_supply.u_volt)
+ _set_opp_voltage(dev, reg, &old_supply);
return ret;
}
--
2.7.1.410.g6faf27b