Re: [PATCH RESEND 2/2] gpio: axp209: add pinctrl support

[Quentin Schulz]

Hi Linus,

On 24/11/2016 15:17, Linus Walleij wrote:
> On Wed, Nov 23, 2016 at 3:11 PM, Quentin Schulz
> <quentin.schulz@xxxxxxxxxxxxxxxxxx> wrote:
> 
>> The GPIOs present in the AXP209 PMIC have multiple functions. They
>> typically allow a pin to be used as GPIO input or output and can also be
>> used as ADC or regulator for example.[1]
>>
>> This adds the possibility to use all functions of the GPIOs present in
>> the AXP209 PMIC thanks to pinctrl subsystem.
>>
>> [1] see registers 90H, 92H and 93H at
>>     http://dl.linux-sunxi.org/AXP/AXP209_Datasheet_v1.0en.pdf
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> 
> I need Maxime's review on this patch.
> 
>>  .../devicetree/bindings/gpio/gpio-axp209.txt       |  28 +-
> 
> Also move the bindings to pinctrl/pinctrl-axp209.txt
> 
>>  drivers/gpio/gpio-axp209.c                         | 551 ++++++++++++++++++---
> 
> Combined drivers should be in drivers/pinctrl/*.
> 
> Make a separate patch moving the driver to
> drivers/pinctrl/pinctrl-axp209.c (remember -M to git format-patch)
> augment Kconfig and Makefile in both subsystems and make
> these patches on top of that.
> 

So basically:

 - first patch for adding pinctrl to the existing driver
 - second patch for moving the driver and binding from gpio to pinctrl
subsystem
 - third patch for both removing Kconfig entry and Makefile rule from
gpio subsystem, and adding a Kconfig entry and a Makefile rule in
pinctrl subsystem

Is that what you want?

Thanks,
Quentin

> I will deal with cross-merging the result between the GPIO
> and pin control trees.
> 
> Yours,
> Linus Walleij
> 

-- 
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com