Re: [PATCH v6 3/3] sound/usb: Use Media Controller API to share media resources
From: Takashi Iwai
Date: Tue Dec 06 2016 - 14:06:27 EST
On Tue, 06 Dec 2016 19:41:37 +0100,
Shuah Khan wrote:
>
> Hi Takashi,
>
> On 12/05/2016 11:50 PM, Takashi Iwai wrote:
> > On Wed, 30 Nov 2016 23:01:16 +0100,
> > Shuah Khan wrote:
> >>
> >> --- a/sound/usb/card.c
> >> +++ b/sound/usb/card.c
> > (snip)
> >> @@ -616,6 +617,11 @@ static int usb_audio_probe(struct usb_interface *intf,
> >> if (err < 0)
> >> goto __error;
> >>
> >> + if (quirk && quirk->media_device) {
> >> + /* don't want to fail when media_snd_device_create() fails */
> >> + media_snd_device_create(chip, intf);
> >
> > Note that the usb-audio driver is probed for each usb interface, and
> > there are multiple interfaces per device. That is, usb_audio_probe()
> > may be called multiple times per device, and at the second or the
> > later calls, it appends the stuff onto the previously created card
> > object.
> >
> > So, you'd have to make this call also conditional (e.g. check
> > chip->num_interfaces == 0, indicating the very first one), or allow to
> > be called multiple times.
> >
> > In the former case, it'd be better to split media_snd_device_create()
> > and media_snd_mixer_init(). The *_device_create() needs to be called
> > only once, while *_mixer_init() still has to be called for each time
> > because the new mixer element may be added for each interface.
> >
>
> Thanks for the catch. I am able to fix this in media_snd_device_create()
> I made a change to do media_dev allocate only once. media_snd_mixer_init()
> will get called every time media_snd_device_create() is called. This way
> new mixers can be handled. media_snd_mixer_init() has logic to deal with
> mixers that are already initialized. We are good here with the following
> change:
>
> @@ -272,6 +258,14 @@ int media_snd_device_create(struct snd_usb_audio *chip,
> struct usb_device *usbdev = interface_to_usbdev(iface);
> int ret;
>
> + /* usb-audio driver is probed for each usb interface, and
> + * there are multiple interfaces per device. Avoid calling
> + * media_device_usb_allocate() each time usb_audio_probe()
> + * is called. Do it only once.
> + */
> + if (chip->media_dev)
> + goto snd_mixer_init;
> +
> mdev = media_device_usb_allocate(usbdev, KBUILD_MODNAME);
> if (!mdev)
> return -ENOMEM;
> @@ -291,6 +285,7 @@ int media_snd_device_create(struct snd_usb_audio *chip,
> /* save media device - avoid lookups */
> chip->media_dev = mdev;
>
> +snd_mixer_init:
> /* Create media entities for mixer and control dev */
> ret = media_snd_mixer_init(chip);
> if (ret) {
This looks good enough, yes.
>
> >
> >> + }
> >> +
> >> usb_chip[chip->index] = chip;
> >> chip->num_interfaces++;
> >> usb_set_intfdata(intf, chip);
> >> @@ -672,6 +678,14 @@ static void usb_audio_disconnect(struct usb_interface *intf)
> >> list_for_each(p, &chip->midi_list) {
> >> snd_usbmidi_disconnect(p);
> >> }
> >> + /*
> >> + * Nice to check quirk && quirk->media_device and
> >> + * then call media_snd_device_delete(). Don't have
> >> + * access to quirk here. media_snd_device_delete()
> >> + * acceses mixer_list
> >> + */
> >> + media_snd_device_delete(chip);
> >
> > ... meanwhile this is OK, as it's called only once.
> >
> > (BTW, is it OK to call media_* stuff while the device is still in use?
> > The disconnect callback gets called for hot-unplug.)
> >
>
> Yes. All of the media_* functions that get called during run-time check for
> chip->media_dev or media_ctl and do nothing when these are null.
>
> media_device itself will not be free'd until all reference are gone. When
> usb_audio_disconnect() happens via unbind snd_usb_audio or physical remove,
> media_dev sticks around until au0828 (media driver) goes away. There is
> handling for any user apps. that have /dev/mediaX open.
>
> Does this sound correct? Did I miss any of your concerns?
That sounds all good, so it's safe to call there.
thanks,
Takashi