Re: [Linaro-acpi] [PATCH V1 1/2] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version
From: Robert Richter
Date: Thu Dec 08 2016 - 11:35:05 EST
On 02.12.16 10:27:43, Bjorn Helgaas wrote:
> On Fri, Dec 02, 2016 at 11:45:00AM +0100, Robert Richter wrote:
> > On 02.12.16 11:06:24, Tomasz Nowicki wrote:
> > > On 02.12.2016 07:42, Duc Dang wrote:
> >
> > > >@@ -98,16 +98,16 @@ struct mcfg_fixup {
> > > > { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \
> > > > &pci_thunder_ecam_ops }
> > > > /* SoC pass1.x */
> > > >- THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */
> > > >- THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */
> > > >- THUNDER_ECAM_QUIRK(2, 0),
> > > >- THUNDER_ECAM_QUIRK(2, 1),
> > > >- THUNDER_ECAM_QUIRK(2, 2),
> > > >- THUNDER_ECAM_QUIRK(2, 3),
> > > >- THUNDER_ECAM_QUIRK(2, 10),
> > > >- THUNDER_ECAM_QUIRK(2, 11),
> > > >- THUNDER_ECAM_QUIRK(2, 12),
> > > >- THUNDER_ECAM_QUIRK(2, 13),
> > > >+ THUNDER_PEM_QUIRK(2, 0UL), /* off-chip devices */
> > > >+ THUNDER_PEM_QUIRK(2, 1UL), /* off-chip devices */
> > > >+ THUNDER_ECAM_QUIRK(2, 0UL),
> > > >+ THUNDER_ECAM_QUIRK(2, 1UL),
> > > >+ THUNDER_ECAM_QUIRK(2, 2UL),
> > > >+ THUNDER_ECAM_QUIRK(2, 3UL),
> > > >+ THUNDER_ECAM_QUIRK(2, 10UL),
> > > >+ THUNDER_ECAM_QUIRK(2, 11UL),
> > > >+ THUNDER_ECAM_QUIRK(2, 12UL),
> > > >+ THUNDER_ECAM_QUIRK(2, 13UL),
> > > >
> > >
> > > The UL suffix is needed for *THUNDER_PEM_QUIRK* only. THUNDER_ECAM_QUIRK is
> > > fine.
> >
> > We should better make the type cast part of the macro.
> >
> > + this:
> >
> > ---
> > #define THUNDER_MCFG_RES(addr, node) \
> > DEFINE_RES_MEM(addr + (node << 44), 0x39 * SZ_16M)
> > ---
> >
> > The args in the macro need parentheses.
>
> Would you mind sending me a little incremental patch doing what you
> want? I could try myself, but since I don't have an arm64 cross-build
> setup, I'm working in the dark.
Your current branch looks good.
5d06f9125ec0 PCI: Explain ARM64 ACPI/MCFG quirk Kconfig and build strategy
Thanks,
-Robert