RE: ATH9 driver issues on ARM64

From: Bharat Kumar Gogada
Date: Fri Dec 09 2016 - 09:36:12 EST

Next message: Stanislav Kozina: "Re: [PATCH] x86/kbuild: enable modversions for symbols exported from asm"
Previous message: SF Markus Elfring: "[PATCH 1/4] staging: greybus: camera: One function call less in gb_camera_configure_streams() after error detection"
In reply to: Tobias Klausmann: "Re: ATH9 driver issues on ARM64"
Next in thread: Bharat Kumar Gogada: "RE: ATH9 driver issues on ARM64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Correcting Manohar Mail ID.

> Hello there,
>
> as this is a thread about ath9k and ARM64, i'm not sure if i should
> answer here or not, but i have similar "stalls" with ath9k on x86_64
> (starting with 4.9rc), stack trace is posted down below where the
> original ARM64 stall traces are.
>
> Greetings,
>
> Tobias
>
>
> On 08.12.2016 18:36, Kalle Valo wrote:
> > Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxxxxx> writes:
> >
> >> > [+cc Kalle, ath9k list]
> > Thanks, but please also CC linux-wireless. Full thread below for the
> > folks there.
> >
> >>> On Thu, Dec 08, 2016 at 01:49:42PM +0000, Bharat Kumar Gogada wrote:
> >>>> Hi,
> >>>>
> >>>> Did anyone test Atheros ATH9 driver(drivers/net/wireless/ath/ath9k/)
> >>>> on ARM64. The end point is TP link wifi card with which supports
> >>>> only legacy interrupts.
> >>> If it works on other arches and the arm64 PCI enumeration works, my
> >>> first guess would be an INTx issue, e.g., maybe the driver is waiting
> >>> for an interrupt that never arrives.
> >> We are not sure for now.
> >>>> We are trying to test it on ARM64 with
> >>>> (drivers/pci/host/pcie-xilinx-nwl.c) as root port.
> >>>>
> >>>> EP is getting enumerated and able to link up.
> >>>>
> >>>> But when we start scan system gets hanged.
> >>> When you say the system hangs when you start a scan, I assume you mean
> >>> a wifi scan, not the PCI enumeration. A problem with a wifi scan
> >>> might cause a *process* to hang, but it shouldn't hang the entire
> >>> system.
> >>>
> >> Yes wifi scan.
> >>>> When we took trace we see that after we start scan assert message is
> >>>> sent but there is no de assert from end point.
> >>> Are you talking about a trace from a PCIe analyzer? Do you see an
> >>> Assert_INTx PCIe message on the link?
> >>>
> >> Yes lecroy trace, yes we do see Assert_INTx and Deassert_INTx happening
> when we do interface link up.
> >> When we have less debug prints in Atheros driver, and do wifi scan we see
> Assert_INTx but never Deassert_INTx,
> >>>> What might cause end point not sending de assert ?
> >>> If the endpoint doesn't send a Deassert_INTx message, I expect that
> >>> would mean the driver didn't service the interrupt and remove the
> >>> condition that caused the device to assert the interrupt in the first
> >>> place.
> >>>
> >>> If the driver didn't receive the interrupt, it couldn't service it, of
> >>> course. You could add a printk in the ath9k interrupt service
> >>> routine to see if you ever get there.
> >>>
> >> The interrupt behavior is changing w.r.t amount of debug prints we add. (I
> kept many prints to aid debug)
> >> root@Xilinx-ZCU102-2016_3:~# iw dev wlan0 scan
> >> [ 83.064675] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.069486] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.074257] ath9k_hw_kill_interrupts 793
> >> [ 83.078260] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.083107] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.087882] ath9k_hw_kill_interrupts 793
> >> [ 83.095450] ath9k_hw_enable_interrupts 821
> >> [ 83.099557] ath9k_hw_enable_interrupts 825
> >> [ 83.103721] ath9k_hw_enable_interrupts 832
> >> [ 83.107887] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.112748] AR_SREV_9100 0
> >> [ 83.115438] ath9k_hw_enable_interrupts 848
> >> [ 83.119607] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.124389] ath9k_hw_intrpend 762
> >> [ 83.127761] (AR_SREV_9340(ah) val 0
> >> [ 83.131234] ath9k_hw_intrpend 767
> >> [ 83.134628] ath_isr 603
> >> [ 83.137134] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.141995] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.146771] ath9k_hw_kill_interrupts 793
> >> [ 83.150864] ath9k_hw_enable_interrupts 821
> >> [ 83.154971] ath9k_hw_enable_interrupts 825
> >> [ 83.159135] ath9k_hw_enable_interrupts 832
> >> [ 83.163300] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.168161] AR_SREV_9100 0
> >> [ 83.170852] ath9k_hw_enable_interrupts 848
> >> [ 83.170855] ath9k_hw_intrpend 762
> >> [ 83.178398] (AR_SREV_9340(ah) val 0
> >> [ 83.181873] ath9k_hw_intrpend 767
> >> [ 83.185265] ath_isr 603
> >> [ 83.187773] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.192635] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.197411] ath9k_hw_kill_interrupts 793
> >> [ 83.201414] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.206258] ath9k_hw_enable_interrupts 821
> >> [ 83.210368] ath9k_hw_enable_interrupts 825
> >> [ 83.214531] ath9k_hw_enable_interrupts 832
> >> [ 83.218698] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.223558] AR_SREV_9100 0
> >> [ 83.226243] ath9k_hw_enable_interrupts 848
> >> [ 83.226246] ath9k_hw_intrpend 762
> >> [ 83.233794] (AR_SREV_9340(ah) val 0
> >> [ 83.237268] ath9k_hw_intrpend 767
> >> [ 83.240661] ath_isr 603
> >> [ 83.243169] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.248030] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.252806] ath9k_hw_kill_interrupts 793
> >> [ 83.256811] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.261651] ath9k_hw_enable_interrupts 821
> >> [ 83.265753] ath9k_hw_enable_interrupts 825
> >> [ 83.269919] ath9k_hw_enable_interrupts 832
> >> [ 83.274083] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.278945] AR_SREV_9100 0
> >> [ 83.281630] ath9k_hw_enable_interrupts 848
> >> [ 83.281633] ath9k_hw_intrpend 762
> >> [ 83.281634] (AR_SREV_9340(ah) val 0
> >> [ 83.281637] ath9k_hw_intrpend 767
> >> [ 83.281648] ath_isr 603
> >> [ 83.281649] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.281651] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.281654] ath9k_hw_kill_interrupts 793
> >> [ 83.312192] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 83.317030] ath9k_hw_enable_interrupts 821
> >> [ 83.321132] ath9k_hw_enable_interrupts 825
> >> [ 83.325297] ath9k_hw_enable_interrupts 832
> >> [ 83.329463] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [ 83.334324] AR_SREV_9100 0
> >> [ 83.337014] ath9k_hw_enable_interrupts 848
> >> ..
> >> ..
> >> This log continues until I turn off board without obtaining scanning result.
> >>
> >> In between I get following cpu stall outputs :
> >> 230.457179] INFO: rcu_sched self-detected stall on CPU
> >> [ 230.457185] 2-...: (31314 ticks this GP)
> idle=2d1/140000000000001/0 softirq=1400/1400 fqs=36713
> >> [ 230.457189] (t=36756 jiffies g=161 c=160 q=16169)
> >> [ 230.457191] Task dump for CPU 2:
> >> [ 230.457196] kworker/u8:4 R running task 0 1342 2 0x00000002
> >> [ 230.457207] Workqueue: phy0 ieee80211_scan_work
> >> [ 230.457208] Call trace:
> >> [ 230.457214] [<ffffff8008089860>] dump_backtrace+0x0/0x198
> >> [ 230.457219] [<ffffff8008089a0c>] show_stack+0x14/0x20
> >> [ 230.457224] [<ffffff80080c0930>] sched_show_task+0x98/0xf8
> >> [ 230.457228] [<ffffff80080c2628>] dump_cpu_task+0x40/0x50
> >> [ 230.457233] [<ffffff80080e14a8>] rcu_dump_cpu_stacks+0xa0/0xf0
> >> [ 230.457239] [<ffffff80080e4cd8>] rcu_check_callbacks+0x468/0x748
> >> [ 230.457243] [<ffffff80080e7cfc>] update_process_times+0x3c/0x68
> >> [ 230.457249] [<ffffff80080f6dfc>] tick_sched_handle.isra.5+0x3c/0x50
> >> [ 230.457253] [<ffffff80080f6e54>] tick_sched_timer+0x44/0x90
> >> [ 230.457257] [<ffffff80080e86b0>] __hrtimer_run_queues+0xf0/0x178
> >> ** 10 printk messages dropped ** [ 230.457302] f8c0: 0000000000000000
> 0000000005f5e0ff 000000000001379a 3866666666666620
> >> [ 230.457306] f8e0: ffffff800a1b4065 0000000000000006 ffffff800a129000
> ffffffc87b8010a8
> >> [ 230.457310] f900: ffffff808a1b4057 ffffff800a1c3000 ffffff800a1b3000
> ffffff800a13b000
> >> [ 230.457314] f920: 0000000000000140 0000000000000006
> ffffff800a1b3b10 ffffff800a1c39e8
> >> [ 230.457318] f940: 000000000000002f ffffff800a1b8a98 ffffff800a1b3ae8
> ffffffc87b07f990
> >> [ 230.457322] f960: ffffff80080d6230 ffffffc87b07f990 ffffff80080d6234
> 0000000060000145
> >> ** 1 printk messages dropped ** [ 230.457329] [<ffffff8008085720>]
> el1_irq+0xa0/0x100
> >> ** 9 printk messages dropped ** [ 230.457373] [<ffffff800885ad60>]
> ieee80211_hw_config+0x50/0x290
> >> [ 230.457377] [<ffffff8008863690>] ieee80211_scan_work+0x1f8/0x480
> >> [ 230.457383] [<ffffff80080b15d0>] process_one_work+0x120/0x378
> >> [ 230.457386] [<ffffff80080b1870>] worker_thread+0x48/0x4b0
> >> [ 230.457391] [<ffffff80080b7108>] kthread+0xd0/0xe8
> >> [ 230.457395] [<ffffff8008085dd0>] ret_from_fork+0x10/0x40
> >> [ 230.480389] ath9k_hw_intrpend 762
> >>
> >>
> >> [ 545.487987] ath9k: ath9k_ioread32 ffffff800a400024
> >> [ 545.526189] INFO: rcu_sched self-detected stall on CPU
> >> [ 545.526195] 2-...: (97636 ticks this GP)
> idle=2d1/140000000000001/0 softirq=1400/1400 fqs=115374
> >> [ 545.526199] (t=115523 jiffies g=161 c=160 q=51066)
> >> [ 545.526201] Task dump for CPU 2:
> >> [ 545.526206] kworker/u8:4 R running task 0 1342 2 0x00000002
> >> ** 3 printk messages dropped ** [ 545.526231] [<ffffff8008089a0c>]
> show_stack+0x14/0x20
> >> ** 9 printk messages dropped ** [ 545.526280] [<ffffff80086a71e8>]
> arch_timer_handler_phys+0x30/0x40
> >> [ 545.526284] [<ffffff80080dbe18>] handle_percpu_devid_irq+0x78/0xa0
> >> [ 545.526291] [<ffffff80080d760c>] generic_handle_irq+0x24/0x38
> >> [ 545.526296] [<ffffff80080d7944>] __handle_domain_irq+0x5c/0xb8
> >> [ 545.526299] [<ffffff80080824bc>] gic_handle_irq+0x64/0xc0
> >> [ 545.526302] Exception stack(0xffffffc87b07f870 to 0xffffffc87b07f990)
> >> [ 545.526306] f860: 0000000000009732 ffffff800a1eaaa8
> >> ** 8 printk messages dropped ** [ 545.526341] f980: ffffff800a1c39e8
> 0000000000000036
> >> [ 545.526345] [<ffffff8008085720>] el1_irq+0xa0/0x100
> >> [ 545.526349] [<ffffff80080d6234>] console_unlock+0x384/0x5b0
> >> [ 545.526353] [<ffffff80080d673c>] vprintk_emit+0x2dc/0x4b0
> >> [ 545.526357] [<ffffff80080d6a50>] vprintk_default+0x38/0x40
> >> [ 545.526362] [<ffffff8008129704>] printk+0x58/0x60
> >> [ 545.526366] [<ffffff800859e3e4>] ath9k_iowrite32+0x9c/0xa8
> >> [ 545.526372] [<ffffff80085c7ca8>] ath9k_hw_kill_interrupts+0x28/0xf0
> >> [ 545.526376] [<ffffff80085a18ec>] ath_reset+0x24/0x68
> >> ** 2 printk messages dropped ** [ 545.526391] [<ffffff800885ad60>]
> ieee80211_hw_config+0x50/0x290
> >> ** 11 printk messages dropped ** [ 545.532834] ath9k_hw_kill_interrupts
> 793
> >> [ 545.532890] ath9k_hw_enable_interrupts 821
>
> [ 81.876902] INFO: rcu_preempt detected stalls on CPUs/tasks:
> [ 81.876912] Tasks blocked on level-0 rcu_node (CPUs 0-7): P0
> [ 81.876932] (detected by 4, t=60002 jiffies, g=1873, c=1872, q=4967)
> [ 81.876936] swapper/4 R running task 0 0 1
> 0x00000000
> [ 81.876941] 0000000000000001 ffffffff810725f6 ffff88017edbc240
> ffffffff81a3dc40
> [ 81.876945] ffffffff81101e46 ffff88025ef173c0 ffffffff81a3dc40
> ffffffff81a3dc40
> [ 81.876948] 00000000ffffffff ffffffff810a7333 ffff88017ecee698
> ffff88017edbc240
> [ 81.876951] Call Trace:
> [ 81.876970] <IRQ>
> [ 81.876979] [<ffffffff810725f6>] ? sched_show_task+0xd6/0x140
> [ 81.876983] [<ffffffff81101e46>] ?
> rcu_print_detail_task_stall_rnp+0x40/0x61
> [ 81.876989] [<ffffffff810a7333>] ? rcu_check_callbacks+0x6b3/0x8c0
> [ 81.876993] [<ffffffff810b8350>] ? tick_sched_handle.isra.14+0x40/0x40
> [ 81.876996] [<ffffffff810aa4c3>] ? update_process_times+0x23/0x50
> [ 81.876999] [<ffffffff810b8383>] ? tick_sched_timer+0x33/0x60
> [ 81.877002] [<ffffffff810aaf09>] ? __hrtimer_run_queues+0xb9/0x150
> [ 81.877004] [<ffffffff810ab198>] ? hrtimer_interrupt+0x98/0x1a0
> [ 81.877008] [<ffffffff81031b1e>] ?
> smp_trace_apic_timer_interrupt+0x5e/0x90
> [ 81.877012] [<ffffffff815b31bf>] ? apic_timer_interrupt+0x7f/0x90
> [ 81.877013] <EOI>
> [ 81.877017] [<ffffffff8147f28d>] ? cpuidle_enter_state+0x13d/0x1f0
> [ 81.877019] [<ffffffff8147f289>] ? cpuidle_enter_state+0x139/0x1f0
> [ 81.877021] [<ffffffff81088c19>] ? cpu_startup_entry+0x139/0x210
> [ 81.877027] [<ffffffff8102fc9e>] ? start_secondary+0x13e/0x170
> [ 81.877029] swapper/4 R running task 0 0 1
> 0x00000000
> [ 81.877032] 0000000000000001 ffffffff810725f6 ffff88017edbc240
> ffffffff81a3dc40
> [ 81.877035] ffffffff81101e46 ffff88025ef173c0 ffffffff81a3dc40
> ffffffff81a3dc40
> [ 81.877038] 00000000ffffffff ffffffff810a7368 ffff88017ecee698
> ffff88017edbc240
> [ 81.877041] Call Trace:
> [ 81.877045] <IRQ>
> [ 81.877049] [<ffffffff810725f6>] ? sched_show_task+0xd6/0x140
> [ 81.877051] [<ffffffff81101e46>] ?
> rcu_print_detail_task_stall_rnp+0x40/0x61
> [ 81.877055] [<ffffffff810a7368>] ? rcu_check_callbacks+0x6e8/0x8c0
> [ 81.877058] [<ffffffff810b8350>] ? tick_sched_handle.isra.14+0x40/0x40
> [ 81.877060] [<ffffffff810aa4c3>] ? update_process_times+0x23/0x50
> [ 81.877063] [<ffffffff810b8383>] ? tick_sched_timer+0x33/0x60
> [ 81.877065] [<ffffffff810aaf09>] ? __hrtimer_run_queues+0xb9/0x150
> [ 81.877068] [<ffffffff810ab198>] ? hrtimer_interrupt+0x98/0x1a0
> [ 81.877070] [<ffffffff81031b1e>] ?
> smp_trace_apic_timer_interrupt+0x5e/0x90
> [ 81.877073] [<ffffffff815b31bf>] ? apic_timer_interrupt+0x7f/0x90
> [ 81.877074] <EOI>
> [ 81.877076] [<ffffffff8147f28d>] ? cpuidle_enter_state+0x13d/0x1f0
> [ 81.877078] [<ffffffff8147f289>] ? cpuidle_enter_state+0x139/0x1f0
> [ 81.877080] [<ffffffff81088c19>] ? cpu_startup_entry+0x139/0x210
> [ 81.877084] [<ffffffff8102fc9e>] ? start_secondary+0x13e/0x170
> [ 91.132787] INFO: rcu_preempt detected expedited stalls on
> CPUs/tasks: { P0 } 63785 jiffies s: 505 root: 0x0/T
> [ 91.132796] blocking rcu_node structures:
>
> >>
> >>
> >> But if we have less debug prints it does not reach EP handler sometimes, due
> to following
> >> Condition in "kernel/irq/chip.c" in function handle_simple_irq
> >>
> >> if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
> >> desc->istate |= IRQS_PENDING;
> >> goto out_unlock;
> >> }
> >> Here irqd_irq_disabled is being set to 1.
> >>
> >> With lesser debug prints it stops after following prints:
> >> root@Xilinx-ZCU102-2016_3:~# iw dev wlan0 scan
> >> [ 54.781045] ath9k_hw_kill_interrupts 793
> >> [ 54.785007] ath9k_hw_kill_interrupts 793
> >> [ 54.792535] ath9k_hw_enable_interrupts 821
> >> [ 54.796642] ath9k_hw_enable_interrupts 825
> >> [ 54.800807] ath9k_hw_enable_interrupts 832
> >> [ 54.804973] AR_SREV_9100 0
> >> [ 54.807663] ath9k_hw_enable_interrupts 848
> >> [ 54.811843] ath9k_hw_intrpend 762
> >> [ 54.815211] (AR_SREV_9340(ah) val 0
> >> [ 54.818684] ath9k_hw_intrpend 767
> >> [ 54.822078] ath_isr 603
> >> [ 54.824587] ath9k_hw_kill_interrupts 793
> >> [ 54.828601] ath9k_hw_enable_interrupts 821
> >> [ 54.832750] ath9k_hw_enable_interrupts 825
> >> [ 54.836916] ath9k_hw_enable_interrupts 832
> >> [ 54.841082] AR_SREV_9100 0
> >> [ 54.843772] ath9k_hw_enable_interrupts 848
> >> [ 54.843775] ath9k_hw_intrpend 762
> >> [ 54.851319] (AR_SREV_9340(ah) val 0
> >> [ 54.854793] ath9k_hw_intrpend 767
> >> [ 54.858185] ath_isr 603
> >> [ 54.860696] ath9k_hw_kill_interrupts 793
> >> [ 54.864776] ath9k_hw_enable_interrupts 821
> >> [ 54.867061] ath9k_hw_kill_interrupts 793
> >> [ 54.872870] ath9k_hw_enable_interrupts 825
> >> [ 54.877036] ath9k_hw_enable_interrupts 832
> >> [ 54.881202] AR_SREV_9100 0
> >> [ 54.883892] ath9k_hw_enable_interrupts 848
> >> [ 75.963129] INFO: rcu_sched detected stalls on CPUs/tasks:
> >> [ 75.968602] 0-...: (2 GPs behind) idle=9d5/140000000000001/0
> softirq=1103/1109 fqs=519
> >> [ 75.976675] (detected by 2, t=5274 jiffies, g=64, c=63, q=11)
> >> [ 75.982485] Task dump for CPU 0:
> >> [ 75.985696] ksoftirqd/0 R running task 0 3 2 0x00000002
> >> [ 75.992726] Call trace:
> >> [ 75.995165] [<ffffff8008086b3c>] __switch_to+0xc4/0xd0
> >> [ 76.000281] [<ffffffc87b830500>] 0xffffffc87b830500
> >> [ 139.059027] INFO: rcu_sched detected stalls on CPUs/tasks:
> >> [ 139.064430] 0-...: (2 GPs behind) idle=9d5/140000000000001/0
> softirq=1103/1109 fqs=2097
> >> [ 139.072593] (detected by 2, t=21049 jiffies, g=64, c=63, q=11)
> >> [ 139.078489] Task dump for CPU 0:
> >> [ 139.081700] ksoftirqd/0 R running task 0 3 2 0x00000002
> >> [ 139.088731] Call trace:
> >> [ 139.091165] [<ffffff8008086b3c>] __switch_to+0xc4/0xd0
> >> [ 139.096285] [<ffffffc87b830500>] 0xffffffc87b830500
> >>
> >>
> >>>> We are not seeing any issues on 32-bit ARM platform and X86
> >>>> platform.
> >>> Can you collect a dmesg log (or, if the system hang means you can't
> >>> collect that, a console log with "ignore_loglevel"), and "lspci -vv"
> >>> output as root? That should have clues about whether the INTx got
> >>> routed correctly. /proc/interrupts should also show whether we're
> >>> receiving interrupts from the device.
> >> Here is the lspci output:
> >> 00:00.0 PCI bridge: Xilinx Corporation Device d022 (prog-if 00 [Normal
> decode])
> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0
> >> Interrupt: pin A routed to IRQ 224
> >> Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
> >> I/O behind bridge: 00000000-00000fff
> >> Memory behind bridge: e0000000-e00fffff
> >> Prefetchable memory behind bridge: 00000000fff00000-
> 00000000000fffff
> >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> >> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >> Capabilities: [40] Power Management version 3
> >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> >> Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
> >> DevCap: MaxPayload 256 bytes, PhantFunc 0
> >> ExtTag- RBE+
> >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >> MaxPayload 128 bytes, MaxReadReq 512 bytes
> >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend+
> >> LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported,
> Exit Latency L0s unlimited, L1 unlimited
> >> ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
> >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible+
> >> RootCap: CRSVisible+
> >> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >> DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-,
> OBFF Not Supported ARIFwd-
> >> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
> OBFF Disabled ARIFwd-
> >> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> >> Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >> Compliance De-emphasis: -6dB
> >> LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >> EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >> Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
> >> Capabilities: [10c v1] Virtual Channel
> >> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> >> Arb: Fixed- WRR32- WRR64- WRR128-
> >> Ctrl: ArbSelect=Fixed
> >> Status: InProgress-
> >> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> >> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
> WRR256-
> >> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >> Status: NegoPending- InProgress-
> >> Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1
> Len=018 <?>
> >>
> >> 01:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network
> Adapter (rev 01)
> >> Subsystem: Qualcomm Atheros Device 3112
> >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >> Latency: 0, Cache Line Size: 128 bytes
> >> Interrupt: pin A routed to IRQ 224
> >> Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=128K]
> >> [virtual] Expansion ROM at e0020000 [disabled] [size=64K]
> >> Capabilities: [40] Power Management version 3
> >> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
> PME(D0+,D1+,D2-,D3hot+,D3cold-)
> >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >> Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
> >> Address: 0000000000000000 Data: 0000
> >> Masking: 00000000 Pending: 00000000
> >> Capabilities: [70] Express (v2) Endpoint, MSI 00
> >> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
> L0s <1us, L1 <8us
> >> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> SlotPowerLimit 0.000W
> >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> >> MaxPayload 128 bytes, MaxReadReq 512 bytes
> >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
> Latency L0s <2us, L1 <64us
> >> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >> DevCap2: Completion Timeout: Not Supported, TimeoutDis+,
> LTR-, OBFF Not Supported
> >> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
> OBFF Disabled
> >> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-
> >> Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >> Compliance De-emphasis: -6dB
> >> LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >> EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >> Capabilities: [100 v1] Advanced Error Reporting
> >> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> >> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >> AERCap: First Error Pointer: 00, GenCap- CGenEn-
> ChkCap- ChkEn-
> >> Capabilities: [140 v1] Virtual Channel
> >> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> >> Arb: Fixed- WRR32- WRR64- WRR128-
> >> Ctrl: ArbSelect=Fixed
> >> Status: InProgress-
> >> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> >> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
> WRR256-
> >> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >> Status: NegoPending- InProgress-
> >> Capabilities: [300 v1] Device Serial Number 00-00-00-00-00-00-00-00
> >> Kernel driver in use: ath9k
> >>
> >> Here is the cat /proc/interrupts (after we do interface up):
> >>
> >> root@:~# ifconfig wlan0 up
> >> [ 1548.926601] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >> root@Xilinx-ZCU102-2016_3:~# cat /proc/interrupts
> >> CPU0 CPU1 CPU2 CPU3
> >> 1: 0 0 0 0 GICv2 29 Edge arch_timer
> >> 2: 19873 20058 19089 17435 GICv2 30 Edge arch_timer
> >> 12: 0 0 0 0 GICv2 156 Level zynqmp-dma
> >> 13: 0 0 0 0 GICv2 157 Level zynqmp-dma
> >> 14: 0 0 0 0 GICv2 158 Level zynqmp-dma
> >> 15: 0 0 0 0 GICv2 159 Level zynqmp-dma
> >> 16: 0 0 0 0 GICv2 160 Level zynqmp-dma
> >> 17: 0 0 0 0 GICv2 161 Level zynqmp-dma
> >> 18: 0 0 0 0 GICv2 162 Level zynqmp-dma
> >> 19: 0 0 0 0 GICv2 163 Level zynqmp-dma
> >> 20: 0 0 0 0 GICv2 164 Level Mali_GP_MMU,
> Mali_GP, Mali_PP0_MMU, Mali_PP0, Mali_PP1_MMU, Mali_PP1
> >> 30: 0 0 0 0 GICv2 95 Level eth0, eth0
> >> 206: 314 0 0 0 GICv2 49 Level cdns-i2c
> >> 207: 40 0 0 0 GICv2 50 Level cdns-i2c
> >> 209: 0 0 0 0 GICv2 150 Level nwl_pcie:misc
> >> 214: 12 0 0 0 GICv2 47 Level ff0f0000.spi
> >> 215: 0 0 0 0 GICv2 58 Level ffa60000.rtc
> >> 216: 0 0 0 0 GICv2 59 Level ffa60000.rtc
> >> 217: 0 0 0 0 GICv2 165 Level ahci-
> ceva[fd0c0000.ahci]
> >> 218: 61 0 0 0 GICv2 81 Level mmc0
> >> 219: 0 0 0 0 GICv2 187 Level arm-smmu global fault
> >> 220: 471 0 0 0 GICv2 53 Level xuartps
> >> 223: 0 0 0 0 GICv2 154 Level fd4c0000.dma
> >> 224: 3 0 0 0 dummy 1 Edge ath9k
> >> 225: 0 0 0 0 GICv2 97 Level xhci-hcd:usb1
> >>
> >> Regards,
> >> Bharat

Next message: Stanislav Kozina: "Re: [PATCH] x86/kbuild: enable modversions for symbols exported from asm"
Previous message: SF Markus Elfring: "[PATCH 1/4] staging: greybus: camera: One function call less in gb_camera_configure_streams() after error detection"
In reply to: Tobias Klausmann: "Re: ATH9 driver issues on ARM64"
Next in thread: Bharat Kumar Gogada: "RE: ATH9 driver issues on ARM64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]