Re: [PATCH v2] drivers: Update drv260x driver

From: Dmitry Torokhov
Date: Sun Dec 11 2016 - 02:23:00 EST

Hi Jingkui,

On Fri, Dec 09, 2016 at 01:45:26PM -0800, Jingkui Wang wrote:
> Update driver drv260x to use generic device properties
> Remove platform data and corresponding header file

Please next time come up with more descriptive subject than "drivers:
Update drv260x driver": when scanning commit messages person shoudl be
able to gauge whether the change is interesting or not.

> -static int drv260x_parse_dt(struct device *dev,
> +static int drv260x_read_device_property(struct device *dev,
> struct drv260x_data *haptics)
> {
> - struct device_node *np = dev->of_node;
> unsigned int voltage;
> int error;
>
> - error = of_property_read_u32(np, "mode", &haptics->mode);
> + error = device_property_read_u32(dev, "mode", &haptics->mode);
> if (error) {
> dev_err(dev, "%s: No entry for mode\n", __func__);
> return error;
> }
>
> - error = of_property_read_u32(np, "library-sel", &haptics->library);
> + error = device_property_read_u32(dev, "library-sel", &haptics->library);
> if (error) {
> dev_err(dev, "%s: No entry for library selection\n",
> __func__);
> return error;
> }

Now that platform code is gone there it makes no sense separating
reading properties from validating the settings. Does the following
version look OK to you (it needs a patch introducing temporary in
probe() function, you'll find it attached)?

Thanks.

--
Dmitry


Input: drv260x - use generic device properties

From: Jingkui Wang <jkwang@xxxxxxxxxx>

Update driver drv260x to use generic device properties so that it can be
used on non-DT systems. We also remove platform data as generic device
properties work on static board code as well.

Signed-off-by: Jingkui Wang <jkwang@xxxxxxxxxx>
Patchwork-Id: 9469075
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/misc/drv260x.c | 80 ++++++---------------------
include/linux/platform_data/drv260x-pdata.h | 28 ---------
2 files changed, 19 insertions(+), 89 deletions(-)
delete mode 100644 include/linux/platform_data/drv260x-pdata.h

diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index 18c266c..11664d7 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -18,8 +18,6 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -27,7 +25,6 @@
#include <linux/regulator/consumer.h>

#include <dt-bindings/input/ti-drv260x.h>
-#include <linux/platform_data/drv260x-pdata.h>

#define DRV260X_STATUS 0x0
#define DRV260X_MODE 0x1
@@ -468,54 +465,12 @@ static const struct regmap_config drv260x_regmap_config = {
.cache_type = REGCACHE_NONE,
};

-#ifdef CONFIG_OF
-static int drv260x_parse_dt(struct device *dev,
- struct drv260x_data *haptics)
-{
- struct device_node *np = dev->of_node;
- unsigned int voltage;
- int error;
-
- error = of_property_read_u32(np, "mode", &haptics->mode);
- if (error) {
- dev_err(dev, "%s: No entry for mode\n", __func__);
- return error;
- }
-
- error = of_property_read_u32(np, "library-sel", &haptics->library);
- if (error) {
- dev_err(dev, "%s: No entry for library selection\n",
- __func__);
- return error;
- }
-
- error = of_property_read_u32(np, "vib-rated-mv", &voltage);
- if (!error)
- haptics->rated_voltage = drv260x_calculate_voltage(voltage);
-
-
- error = of_property_read_u32(np, "vib-overdrive-mv", &voltage);
- if (!error)
- haptics->overdrive_voltage = drv260x_calculate_voltage(voltage);
-
- return 0;
-}
-#else
-static inline int drv260x_parse_dt(struct device *dev,
- struct drv260x_data *haptics)
-{
- dev_err(dev, "no platform data defined\n");
-
- return -EINVAL;
-}
-#endif
-
static int drv260x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
struct device *dev = &client->dev;
struct drv260x_data *haptics;
+ u32 voltage;
int error;

haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
@@ -525,29 +480,24 @@ static int drv260x_probe(struct i2c_client *client,
haptics->overdrive_voltage = DRV260X_DEF_OD_CLAMP_VOLT;
haptics->rated_voltage = DRV260X_DEF_RATED_VOLT;

- if (pdata) {
- haptics->mode = pdata->mode;
- haptics->library = pdata->library_selection;
- if (pdata->vib_overdrive_voltage)
- haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage);
- if (pdata->vib_rated_voltage)
- haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage);
- } else if (client->dev.of_node) {
- error = drv260x_parse_dt(&client->dev, haptics);
- if (error)
- return error;
- } else {
- dev_err(dev, "Platform data not set\n");
- return -ENODEV;
+ error = device_property_read_u32(dev, "mode", &haptics->mode);
+ if (error) {
+ dev_err(dev, "Can't fetch 'mode' property: %d\n", error);
+ return error;
}

-
if (haptics->mode < DRV260X_LRA_MODE ||
haptics->mode > DRV260X_ERM_MODE) {
dev_err(dev, "Vibrator mode is invalid: %i\n", haptics->mode);
return -EINVAL;
}

+ error = device_property_read_u32(dev, "library-sel", &haptics->library);
+ if (error) {
+ dev_err(dev, "Can't fetch 'library-sel' property: %d\n", error);
+ return error;
+ }
+
if (haptics->library < DRV260X_LIB_EMPTY ||
haptics->library > DRV260X_ERM_LIB_F) {
dev_err(dev,
@@ -569,6 +519,14 @@ static int drv260x_probe(struct i2c_client *client,
return -EINVAL;
}

+ error = device_property_read_u32(dev, "vib-rated-mv", &voltage);
+ haptics->rated_voltage = error ? DRV260X_DEF_RATED_VOLT :
+ drv260x_calculate_voltage(voltage);
+
+ error = device_property_read_u32(dev, "vib-overdrive-mv", &voltage);
+ haptics->overdrive_voltage = error ? DRV260X_DEF_OD_CLAMP_VOLT :
+ drv260x_calculate_voltage(voltage);
+
haptics->regulator = devm_regulator_get(dev, "vbat");
if (IS_ERR(haptics->regulator)) {
error = PTR_ERR(haptics->regulator);
diff --git a/include/linux/platform_data/drv260x-pdata.h b/include/linux/platform_data/drv260x-pdata.h
deleted file mode 100644
index 0a03b09..0000000
--- a/include/linux/platform_data/drv260x-pdata.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Platform data for DRV260X haptics driver family
- *
- * Author: Dan Murphy <dmurphy@xxxxxx>
- *
- * Copyright: (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef _LINUX_DRV260X_PDATA_H
-#define _LINUX_DRV260X_PDATA_H
-
-struct drv260x_platform_data {
- u32 library_selection;
- u32 mode;
- u32 vib_rated_voltage;
- u32 vib_overdrive_voltage;
-};
-
-#endif
Input: drv260x - use temporary for &client->dev

From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>

Let's introduce a temporary for "client->dev" is probe() as we use
it quite a few times and "dev" is shorter.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/misc/drv260x.c | 39 ++++++++++++++++-----------------------
1 file changed, 16 insertions(+), 23 deletions(-)

diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index 9789d4f..18c266c 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -514,10 +514,11 @@ static int drv260x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct device *dev = &client->dev;
struct drv260x_data *haptics;
int error;

- haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
+ haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
if (!haptics)
return -ENOMEM;

@@ -536,22 +537,20 @@ static int drv260x_probe(struct i2c_client *client,
if (error)
return error;
} else {
- dev_err(&client->dev, "Platform data not set\n");
+ dev_err(dev, "Platform data not set\n");
return -ENODEV;
}


if (haptics->mode < DRV260X_LRA_MODE ||
haptics->mode > DRV260X_ERM_MODE) {
- dev_err(&client->dev,
- "Vibrator mode is invalid: %i\n",
- haptics->mode);
+ dev_err(dev, "Vibrator mode is invalid: %i\n", haptics->mode);
return -EINVAL;
}

if (haptics->library < DRV260X_LIB_EMPTY ||
haptics->library > DRV260X_ERM_LIB_F) {
- dev_err(&client->dev,
+ dev_err(dev,
"Library value is invalid: %i\n", haptics->library);
return -EINVAL;
}
@@ -559,40 +558,37 @@ static int drv260x_probe(struct i2c_client *client,
if (haptics->mode == DRV260X_LRA_MODE &&
haptics->library != DRV260X_LIB_EMPTY &&
haptics->library != DRV260X_LIB_LRA) {
- dev_err(&client->dev,
- "LRA Mode with ERM Library mismatch\n");
+ dev_err(dev, "LRA Mode with ERM Library mismatch\n");
return -EINVAL;
}

if (haptics->mode == DRV260X_ERM_MODE &&
(haptics->library == DRV260X_LIB_EMPTY ||
haptics->library == DRV260X_LIB_LRA)) {
- dev_err(&client->dev,
- "ERM Mode with LRA Library mismatch\n");
+ dev_err(dev, "ERM Mode with LRA Library mismatch\n");
return -EINVAL;
}

- haptics->regulator = devm_regulator_get(&client->dev, "vbat");
+ haptics->regulator = devm_regulator_get(dev, "vbat");
if (IS_ERR(haptics->regulator)) {
error = PTR_ERR(haptics->regulator);
- dev_err(&client->dev,
- "unable to get regulator, error: %d\n", error);
+ dev_err(dev, "unable to get regulator, error: %d\n", error);
return error;
}

- haptics->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
+ haptics->enable_gpio = devm_gpiod_get_optional(dev, "enable",
GPIOD_OUT_HIGH);
if (IS_ERR(haptics->enable_gpio))
return PTR_ERR(haptics->enable_gpio);

- haptics->input_dev = devm_input_allocate_device(&client->dev);
+ haptics->input_dev = devm_input_allocate_device(dev);
if (!haptics->input_dev) {
dev_err(&client->dev, "Failed to allocate input device\n");
return -ENOMEM;
}

haptics->input_dev->name = "drv260x:haptics";
- haptics->input_dev->dev.parent = client->dev.parent;
+ haptics->input_dev->dev.parent = dev->parent;
haptics->input_dev->close = drv260x_close;
input_set_drvdata(haptics->input_dev, haptics);
input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
@@ -600,8 +596,7 @@ static int drv260x_probe(struct i2c_client *client,
error = input_ff_create_memless(haptics->input_dev, NULL,
drv260x_haptics_play);
if (error) {
- dev_err(&client->dev, "input_ff_create() failed: %d\n",
- error);
+ dev_err(dev, "input_ff_create() failed: %d\n", error);
return error;
}

@@ -613,21 +608,19 @@ static int drv260x_probe(struct i2c_client *client,
haptics->regmap = devm_regmap_init_i2c(client, &drv260x_regmap_config);
if (IS_ERR(haptics->regmap)) {
error = PTR_ERR(haptics->regmap);
- dev_err(&client->dev, "Failed to allocate register map: %d\n",
- error);
+ dev_err(dev, "Failed to allocate register map: %d\n", error);
return error;
}

error = drv260x_init(haptics);
if (error) {
- dev_err(&client->dev, "Device init failed: %d\n", error);
+ dev_err(dev, "Device init failed: %d\n", error);
return error;
}

error = input_register_device(haptics->input_dev);
if (error) {
- dev_err(&client->dev, "couldn't register input device: %d\n",
- error);
+ dev_err(dev, "couldn't register input device: %d\n", error);
return error;
}