[PATCH 0/2] iio: GPIO power switch support

[Bartosz Golaszewski]

This series is aimed at improving the support for baylibre-acme[1]
power measurement capes. 

We would like to add support for power-cycling of devices measured
using TI INA226 ADCs. An example use case would be measuring the power
consumption of a development board during boot and power-cycling it
remotely using a GPIO power switch.

The first patch proposes to add a new DT binding for describing simple
power switches.

The second adds a simple IIO driver exposing a single attribute.

The motivation for using the IIO framework is the fact that we already
use it for reading the data from the ADC and that power-cycling the
measured devices is an integral part of our use case. Users would find
it convenient to be able to use libiio as the single interface.

[1] http://baylibre.com/acme/

Bartosz Golaszewski (2):
  devicetree: power: add bindings for GPIO-driven power switches
  iio: misc: add support for GPIO power switches

 .../bindings/power/gpio-power-switch.txt           |  25 ++++
 drivers/iio/Kconfig                                |   1 +
 drivers/iio/Makefile                               |   1 +
 drivers/iio/misc/Kconfig                           |  17 +++
 drivers/iio/misc/Makefile                          |   6 +
 drivers/iio/misc/gpio-power-switch.c               | 127 +++++++++++++++++++++
 6 files changed, 177 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/gpio-power-switch.txt
 create mode 100644 drivers/iio/misc/Kconfig
 create mode 100644 drivers/iio/misc/Makefile
 create mode 100644 drivers/iio/misc/gpio-power-switch.c

-- 
2.9.3