Re: [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC

[Quentin Schulz]

Hi Maxime,

On 10/12/2016 10:44, Maxime Ripard wrote:
> Hi,
> 
> Just some minor comments.
> 
> On Fri, Dec 09, 2016 at 11:22:36AM +0100, Quentin Schulz wrote:
>> +	/*
>> +	 * Since the thermal sensor needs the IP to be in touchscreen mode and
>> +	 * there is no register to know if the IP has finished its transition
>> +	 * between the two modes, a delay is required when switching modes. This
>> +	 * slows down ADC readings while the latter are critical data to the
> 
> The latter between what and what?
> 
>> +	 * user. Disabling CONFIG_THERMAL_OF in kernel configuration allows the
>> +	 * user to avoid registering the thermal sensor (thus unavailable) and
> 
> Isn't it obvious that it's not going to be available if you do not
> register it?
> 
>> +	 * does not switch between modes thus "quicken" the ADC readings.
>> +	 * The thermal sensor should be enabled by default since the SoC
>> +	 * temperature is usually more critical than ADC readings.
> 
> This last sentence should be in the Kconfig help. You cannot expect
> that all your users will read all the source code they want to compile
> :)
> 
> Overall, I think this comment is kind of missing the point, maybe
> something like:
> 
> /*
>  * Since the controller needs to be in touchscreen mode for its
>  * thermal sensor to operate properly, and that switching between the
>  * two modes needs a delay, always registering in the thermal
>  * framework will significantly slow down the conversion rate of the
>  * ADCs.
>  *
>  * Therefore, instead of depending on THERMAL_OF in Kconfig, we only
>  * register the sensor if that option is enabled, eventually leaving
>  * that choice to the user.
>  */
> 
> Would be much clearer.
> 
>> +	 */
>> +
>> +	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
>> +	/*
>> +	 * This driver is a child of an MFD which has a node in the DT but not
>> +	 * its children. Therefore, the resulting devices of this driver do not
> 
> Wrong indentation for the comment, and saying why the MFD children
> don't have a node in the DT (backward compatibility) would be nice.
> 

Thanks for the comments, that's indeed much clearer.

>> +	 * have an of_node variable.
>> +	 * However, its parent (the MFD driver) has an of_node variable and
>> +	 * since devm_thermal_zone_of_sensor_register uses its first argument to
>> +	 * match the phandle defined in the node of the thermal driver with the
>> +	 * of_node of the device passed as first argument and the third argument
>> +	 * to call ops from thermal_zone_of_device_ops, the solution is to use
>> +	 * the parent device as first argument to match the phandle with its
>> +	 * of_node, and the device from this driver as third argument to return
>> +	 * the temperature.
>> +	 */
>> +		tzd = devm_thermal_zone_of_sensor_register(pdev->dev.parent, 0,
>> +							   info,
>> +							   &sun4i_ts_tz_ops);
> 
> I don't think tzd is used anywhere else in your function, it can be
> made local to this block.
> 

ACK.

Thanks,
Quentin

-- 
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: OpenPGP digital signature