[PATCH 15/31] scripts/spelling.txt: add "intialization" pattern and fix typo instances
From: Masahiro Yamada
Date: Mon Dec 12 2016 - 15:09:58 EST
Fix typos and add the following to the scripts/spelling.txt:
intialization||initialization
The "inintialization" in drivers/acpi/spcr.c is a different pattern
but I fixed it as well in this commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
arch/arm/mach-omap2/omap_twl.c | 2 +-
drivers/acpi/spcr.c | 2 +-
drivers/firewire/core-device.c | 4 ++--
drivers/mmc/host/mmci_qcom_dml.c | 2 +-
drivers/net/wireless/intel/ipw2x00/ipw2100.c | 4 ++--
drivers/net/wireless/intel/ipw2x00/ipw2200.c | 2 +-
drivers/net/wireless/ti/wlcore/init.c | 2 +-
drivers/power/avs/smartreflex.c | 6 +++---
drivers/scsi/ipr.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 14 +++++++-------
drivers/scsi/scsi_transport_sas.c | 2 +-
drivers/scsi/storvsc_drv.c | 2 +-
drivers/usb/gadget/udc/fsl_udc_core.c | 4 ++--
scripts/spelling.txt | 1 +
sound/soc/qcom/lpass.h | 2 +-
sound/soc/soc-topology.c | 4 ++--
16 files changed, 28 insertions(+), 27 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 6bf6267..1346b3a 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -1,5 +1,5 @@
/**
- * OMAP and TWL PMIC specific intializations.
+ * OMAP and TWL PMIC specific initializations.
*
* Copyright (C) 2010 Texas Instruments Incorporated.
* Thara Gopinath
diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index e8d7bc7..90aa749 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -26,7 +26,7 @@
* console is registered and if @earlycon is true, earlycon is set up.
*
* When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
- * from arch inintialization code as soon as the DT/ACPI decision is made.
+ * from arch initialization code as soon as the DT/ACPI decision is made.
*
*/
int __init parse_spcr(bool earlycon)
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index f9e3aee..7c2eed7 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -1068,7 +1068,7 @@ static void fw_device_init(struct work_struct *work)
/*
* Transition the device to running state. If it got pulled
- * out from under us while we did the intialization work, we
+ * out from under us while we did the initialization work, we
* have to shut down the device again here. Normally, though,
* fw_node_event will be responsible for shutting it down when
* necessary. We have to use the atomic cmpxchg here to avoid
@@ -1231,7 +1231,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
break;
/*
- * Do minimal intialization of the device here, the
+ * Do minimal initialization of the device here, the
* rest will happen in fw_device_init().
*
* Attention: A lot of things, even fw_device_get(),
diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
index 2b7fc37..00750c9 100644
--- a/drivers/mmc/host/mmci_qcom_dml.c
+++ b/drivers/mmc/host/mmci_qcom_dml.c
@@ -170,7 +170,7 @@ int dml_hw_init(struct mmci_host *host, struct device_node *np)
writel_relaxed(producer_id | (consumer_id << CONSUMER_PIPE_ID_SHFT),
base + DML_PIPE_ID);
- /* Make sure dml intialization is finished */
+ /* Make sure dml initialization is finished */
mb();
return 0;
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
index 6417609..68aab2c 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
@@ -1238,7 +1238,7 @@ static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
}
/*
- * Start firmware execution after power on and intialization
+ * Start firmware execution after power on and initialization
* The sequence is:
* 1. Release ARC
* 2. Wait for f/w initialization completes;
@@ -1277,7 +1277,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
/* Release ARC - clear reset bit */
write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
- /* wait for f/w intialization complete */
+ /* wait for f/w initialization complete */
IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
i = 5000;
do {
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
index ef9af8a..c09215d 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
@@ -5196,7 +5196,7 @@ static void ipw_rx_queue_restock(struct ipw_priv *priv)
* Move all used packet from rx_used to rx_free, allocating a new SKB for each.
* Also restock the Rx queue via ipw_rx_queue_restock.
*
- * This is called as a scheduled work item (except for during intialization)
+ * This is called as a scheduled work item (except for during initialization)
*/
static void ipw_rx_queue_replenish(void *data)
{
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index d0b7734..58898b9 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -544,7 +544,7 @@ static int wl12xx_init_sta_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
return 0;
}
-/* vif-specific intialization */
+/* vif-specific initialization */
static int wl12xx_init_ap_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
int ret;
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index fa0f19b..974fd68 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -195,7 +195,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
}
/*
- * This function handles the intializations which have to be done
+ * This function handles the initializations which have to be done
* only when both sr device and class driver regiter has
* completed. This will be attempted to be called from both sr class
* driver register and sr device intializtion API's. Only one call
@@ -671,7 +671,7 @@ int sr_register_class(struct omap_sr_class_data *class_data)
sr_class = class_data;
/*
- * Call into late init to do intializations that require
+ * Call into late init to do initializations that require
* both sr driver and sr class driver to be initiallized.
*/
list_for_each_entry(sr_info, &sr_list, node)
@@ -899,7 +899,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
list_add(&sr_info->node, &sr_list);
/*
- * Call into late init to do intializations that require
+ * Call into late init to do initializations that require
* both sr driver and sr class driver to be initiallized.
*/
if (sr_class) {
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 835c59c..b29afaf 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9330,7 +9330,7 @@ static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev,
* ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..)
* @ioa_cfg: ioa cfg struct
*
- * Description: This is the second phase of adapter intialization
+ * Description: This is the second phase of adapter initialization
* This function takes care of initilizing the adapter to the point
* where it can accept new commands.
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4faa767..5c671bd 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4508,7 +4508,7 @@ lpfc_sli4_rb_setup(struct lpfc_hba *phba)
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
*
- * This function is called by the sli intialization code path
+ * This function is called by the sli initialization code path
* to issue config_port mailbox command. This function restarts the
* HBA firmware and issues a config_port mailbox command to configure
* the SLI interface in the sli mode specified by sli_mode
@@ -4648,11 +4648,11 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
/**
- * lpfc_sli_hba_setup - SLI intialization function
+ * lpfc_sli_hba_setup - SLI initialization function
* @phba: Pointer to HBA context object.
*
- * This function is the main SLI intialization function. This function
- * is called by the HBA intialization code, HBA reset code and HBA
+ * This function is the main SLI initialization function. This function
+ * is called by the HBA initialization code, HBA reset code and HBA
* error attention handler code. Caller is not required to hold any
* locks. This function issues config_port mailbox command to configure
* the SLI, setup iocb rings and HBQ rings. In the end the function
@@ -6314,11 +6314,11 @@ lpfc_set_host_data(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
}
/**
- * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * lpfc_sli4_hba_setup - SLI4 device initialization PCI function
* @phba: Pointer to HBA context object.
*
- * This function is the main SLI4 device intialization PCI function. This
- * function is called by the HBA intialization code, HBA reset code and
+ * This function is the main SLI4 device initialization PCI function. This
+ * function is called by the HBA initialization code, HBA reset code and
* HBA error attention handler code. Caller is not required to hold any
* locks.
**/
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 60b651b..7b53ad0 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -1462,7 +1462,7 @@ static void sas_end_device_release(struct device *dev)
}
/**
- * sas_rphy_initialize - common rphy intialization
+ * sas_rphy_initialize - common rphy initialization
* @rphy: rphy to initialise
*
* Used by both sas_end_device_alloc() and sas_expander_alloc() to
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 05526b7..877e2d1 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -278,7 +278,7 @@ static const struct vmstor_protocol vmstor_protocols[] = {
/*
- * This structure is sent during the intialization phase to get the different
+ * This structure is sent during the initialization phase to get the different
* properties of the channel.
*/
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 71094e4..2714c36 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -520,7 +520,7 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
/* Setup qh structure and ep register for ep0. */
static void ep0_setup(struct fsl_udc *udc)
{
- /* the intialization of an ep includes: fields in QH, Regs,
+ /* the initialization of an ep includes: fields in QH, Regs,
* fsl_ep struct */
struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL,
USB_MAX_CTRL_PAYLOAD, 0, 0);
@@ -2343,7 +2343,7 @@ static int struct_ep_setup(struct fsl_udc *udc, unsigned char index,
}
/* Driver probe function
- * all intialization operations implemented here except enabling usb_intr reg
+ * all initialization operations implemented here except enabling usb_intr reg
* board setup should have been done in the platform code
*/
static int fsl_udc_probe(struct platform_device *pdev)
diff --git a/scripts/spelling.txt b/scripts/spelling.txt
index 78196a5..c05dd94 100644
--- a/scripts/spelling.txt
+++ b/scripts/spelling.txt
@@ -562,6 +562,7 @@ interruptted||interrupted
interupted||interrupted
interupt||interrupt
intial||initial
+intialization||initialization
intialized||initialized
intialize||initialize
intregral||integral
diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h
index 924971b..9b03135 100644
--- a/sound/soc/qcom/lpass.h
+++ b/sound/soc/qcom/lpass.h
@@ -82,7 +82,7 @@ struct lpass_variant {
**/
u32 dmactl_audif_start;
u32 wrdma_channel_start;
- /* SOC specific intialization like clocks */
+ /* SOC specific initialization like clocks */
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
int (*alloc_dma_channel)(struct lpass_data *data, int direction);
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 11feb19..abcb3c3 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -344,7 +344,7 @@ static int soc_tplg_widget_load(struct soc_tplg *tplg,
return 0;
}
-/* pass DAI configurations to component driver for extra intialization */
+/* pass DAI configurations to component driver for extra initialization */
static int soc_tplg_dai_load(struct soc_tplg *tplg,
struct snd_soc_dai_driver *dai_drv)
{
@@ -354,7 +354,7 @@ static int soc_tplg_dai_load(struct soc_tplg *tplg,
return 0;
}
-/* pass link configurations to component driver for extra intialization */
+/* pass link configurations to component driver for extra initialization */
static int soc_tplg_dai_link_load(struct soc_tplg *tplg,
struct snd_soc_dai_link *link)
{
--
2.7.4